kernel: bump 4.19 to 4.19.79

Refreshed all patches.

Remove upstreamed (superseded):
- 950-0726-can-mcp251x-Allow-more-time-after-a-reset.patch

Compile-tested on: brcm2708, cns3xxx
Runtime-tested on: cns3xxx

Signed-off-by: Koen Vandeputte <[email protected]>

include/kernel-version.mk

@@ -7,12 +7,12 @@ ifdef CONFIG_TESTING_KERNEL
 endif
 
 LINUX_VERSION-4.9 = .196
-LINUX_VERSION-4.19 = .78
 LINUX_VERSION-4.14 = .149
+LINUX_VERSION-4.19 = .79
 
 LINUX_KERNEL_HASH-4.9.196 = e0ab12b04a975630ece2142a1ac15cfe45140b8c3359226b035c15ca7c92c6ef
-LINUX_KERNEL_HASH-4.19.78 = df63ea77c6e28566102a33f503513bc6280f79b48c90921b39661d3ce6295049
 LINUX_KERNEL_HASH-4.14.149 = e69dabd2368440ce1650cda0cf043e1ba3f3343f940a43b68e761739fcb3f296
+LINUX_KERNEL_HASH-4.19.79 = f1143564364f278ba0893a7813afc02da6ecef6d5de147bd5011aa3cc1634b34
 
 remove_uri_prefix=$(subst git://,,$(subst http://,,$(subst https://,,$(1))))
 sanitize_uri=$(call qstrip,$(subst @,_,$(subst :,_,$(subst .,_,$(subst -,_,$(subst /,_,$(1)))))))

target/linux/brcm2708/patches-4.19/950-0104-mcp2515-Use-DT-supplied-interrupt-flags.patch

@@ -24,7 +24,7 @@ Signed-off-by: Phil Elwell <[email protected]>
 
 --- a/drivers/net/can/spi/mcp251x.c
 +++ b/drivers/net/can/spi/mcp251x.c
-@@ -939,6 +939,9 @@ static int mcp251x_open(struct net_devic
+@@ -948,6 +948,9 @@ static int mcp251x_open(struct net_devic
  	priv->tx_skb = NULL;
  	priv->tx_len = 0;
  

target/linux/brcm2708/patches-4.19/950-0534-mmc-sdhci-Mask-spurious-interrupts.patch

@@ -16,7 +16,7 @@ Signed-off-by: Phil Elwell <[email protected]>
 
 --- a/drivers/mmc/host/sdhci.c
 +++ b/drivers/mmc/host/sdhci.c
-@@ -2932,6 +2932,10 @@ static irqreturn_t sdhci_irq(int irq, vo
+@@ -2937,6 +2937,10 @@ static irqreturn_t sdhci_irq(int irq, vo
  			result = IRQ_WAKE_THREAD;
  		}
  

target/linux/brcm2708/patches-4.19/950-0726-can-mcp251x-Allow-more-time-after-a-reset.patch

@@ -1,47 +0,0 @@
-From 9f29c6c8865de6f2dc200cb4c59a447d0884a6b3 Mon Sep 17 00:00:00 2001
-From: Phil Elwell <[email protected]>
-Date: Thu, 1 Aug 2019 08:58:48 +0100
-Subject: [PATCH 726/806] can: mcp251x: Allow more time after a reset
-
-Some boards take longer than 5ms to power up after a reset, so allow
-a few retry attempts before giving up.
-
-See: https://github.com/raspberrypi/linux/issues/2767
-
-Signed-off-by: Phil Elwell <[email protected]>
----
- drivers/net/can/spi/mcp251x.c | 15 ++++++++++++---
- 1 file changed, 12 insertions(+), 3 deletions(-)
-
---- a/drivers/net/can/spi/mcp251x.c
-+++ b/drivers/net/can/spi/mcp251x.c
-@@ -628,6 +628,7 @@ static int mcp251x_hw_reset(struct spi_d
- 	struct mcp251x_priv *priv = spi_get_drvdata(spi);
- 	u8 reg;
- 	int ret;
-+	int retries = 10;
- 
- 	/* Wait for oscillator startup timer after power up */
- 	mdelay(MCP251X_OST_DELAY_MS);
-@@ -637,10 +638,18 @@ static int mcp251x_hw_reset(struct spi_d
- 	if (ret)
- 		return ret;
- 
--	/* Wait for oscillator startup timer after reset */
--	mdelay(MCP251X_OST_DELAY_MS);
-+	/*
-+	 * Wait for oscillator startup timer after reset
-+	 *
-+	 * Some devices can take longer than the expected 5ms to wake
-+	 * up, so allow a few retries.
-+	 */
-+
-+	do {
-+		mdelay(MCP251X_OST_DELAY_MS);
-+		reg = mcp251x_read_reg(spi, CANSTAT);
-+	} while (!reg && retries--);
- 
--	reg = mcp251x_read_reg(spi, CANSTAT);
- 	if ((reg & CANCTRL_REQOP_MASK) != CANCTRL_REQOP_CONF)
- 		return -ENODEV;
- 

target/linux/brcm2708/patches-4.19/950-0777-arch-arm64-Add-Revision-Serial-Model-to-cpuinfo.patch

@@ -18,7 +18,7 @@ Signed-off-by: Phil Elwell <[email protected]>
  #include <linux/personality.h>
  #include <linux/preempt.h>
  #include <linux/printk.h>
-@@ -125,6 +126,10 @@ static int c_show(struct seq_file *m, vo
+@@ -126,6 +127,10 @@ static int c_show(struct seq_file *m, vo
  {
  	int i, j;
  	bool compat = personality(current->personality) == PER_LINUX32;
@@ -29,7 +29,7 @@ Signed-off-by: Phil Elwell <[email protected]>
  
  	for_each_online_cpu(i) {
  		struct cpuinfo_arm64 *cpuinfo = &per_cpu(cpu_data, i);
-@@ -176,6 +181,26 @@ static int c_show(struct seq_file *m, vo
+@@ -177,6 +182,26 @@ static int c_show(struct seq_file *m, vo
  		seq_printf(m, "CPU revision\t: %d\n\n", MIDR_REVISION(midr));
  	}
  

target/linux/generic/pending-4.19/309-MIPS-Add-CPU-option-reporting-to-proc-cpuinfo.patch

@@ -17,7 +17,7 @@ Signed-off-by: Hauke Mehrtens <[email protected]>
 
 --- a/arch/mips/kernel/proc.c
 +++ b/arch/mips/kernel/proc.c
-@@ -130,6 +130,122 @@ static int show_cpuinfo(struct seq_file
+@@ -134,6 +134,122 @@ static int show_cpuinfo(struct seq_file
  		seq_printf(m, "micromips kernel\t: %s\n",
  		      (read_c0_config3() & MIPS_CONF3_ISA_OE) ?  "yes" : "no");
  	}

target/linux/generic/pending-4.19/640-netfilter-nf_flow_table-add-hardware-offload-support.patch

@@ -506,7 +506,7 @@ Signed-off-by: Pablo Neira Ayuso <[email protected]>
 +MODULE_ALIAS("nf-flow-table-hw");
 --- a/net/netfilter/nf_tables_api.c
 +++ b/net/netfilter/nf_tables_api.c
-@@ -5468,6 +5468,13 @@ static int nf_tables_flowtable_parse_hoo
+@@ -5471,6 +5471,13 @@ static int nf_tables_flowtable_parse_hoo
  	if (err < 0)
  		return err;
  
@@ -520,7 +520,7 @@ Signed-off-by: Pablo Neira Ayuso <[email protected]>
  	ops = kcalloc(n, sizeof(struct nf_hook_ops), GFP_KERNEL);
  	if (!ops)
  		return -ENOMEM;
-@@ -5599,10 +5606,19 @@ static int nf_tables_newflowtable(struct
+@@ -5602,10 +5609,19 @@ static int nf_tables_newflowtable(struct
  	}
  
  	flowtable->data.type = type;
@@ -540,7 +540,7 @@ Signed-off-by: Pablo Neira Ayuso <[email protected]>
  	err = nf_tables_flowtable_parse_hook(&ctx, nla[NFTA_FLOWTABLE_HOOK],
  					     flowtable);
  	if (err < 0)
-@@ -5728,7 +5744,8 @@ static int nf_tables_fill_flowtable_info
+@@ -5731,7 +5747,8 @@ static int nf_tables_fill_flowtable_info
  	    nla_put_string(skb, NFTA_FLOWTABLE_NAME, flowtable->name) ||
  	    nla_put_be32(skb, NFTA_FLOWTABLE_USE, htonl(flowtable->use)) ||
  	    nla_put_be64(skb, NFTA_FLOWTABLE_HANDLE, cpu_to_be64(flowtable->handle),