|
|
@@ -0,0 +1,139 @@
|
|
|
+From f8c331bda6a90b239f600020eec1b0defe7249b5 Mon Sep 17 00:00:00 2001
|
|
|
+From: Florian Fainelli <[email protected]>
|
|
|
+Date: Wed, 22 Jun 2016 17:00:35 -0700
|
|
|
+Subject: [PATCH] ARM: dts: BCM5301x: Add BCM953012ER board
|
|
|
+
|
|
|
+Add support for the Broadcom BCM953012 Enterprise Router reference
|
|
|
+board, enable the following peripherals:
|
|
|
+
|
|
|
+- UART0 (UART1 is not populated)
|
|
|
+- WPS and restart GPIO buttons
|
|
|
+- Ethernet switch w/ only two facing ports
|
|
|
+- NAND flash
|
|
|
+- SPI-NOR flash
|
|
|
+
|
|
|
+Acked-by: Jon Mason <[email protected]>
|
|
|
+Signed-off-by: Florian Fainelli <[email protected]>
|
|
|
+---
|
|
|
+ arch/arm/boot/dts/Makefile | 1 +
|
|
|
+ arch/arm/boot/dts/bcm953012er.dts | 104 ++++++++++++++++++++++++++++++++++++++
|
|
|
+ 2 files changed, 105 insertions(+)
|
|
|
+ create mode 100644 arch/arm/boot/dts/bcm953012er.dts
|
|
|
+
|
|
|
+--- a/arch/arm/boot/dts/Makefile
|
|
|
++++ b/arch/arm/boot/dts/Makefile
|
|
|
+@@ -79,6 +79,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
|
|
|
+ bcm47094-dlink-dir-885l.dtb \
|
|
|
+ bcm94708.dtb \
|
|
|
+ bcm94709.dtb \
|
|
|
++ bcm953012er.dtb \
|
|
|
+ bcm953012k.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_BCM_63XX) += \
|
|
|
+ bcm963138dvt.dtb
|
|
|
+--- /dev/null
|
|
|
++++ b/arch/arm/boot/dts/bcm953012er.dts
|
|
|
+@@ -0,0 +1,104 @@
|
|
|
++/*
|
|
|
++ * BSD LICENSE
|
|
|
++ *
|
|
|
++ * Copyright(c) 2016 Broadcom. All rights reserved.
|
|
|
++ *
|
|
|
++ * Redistribution and use in source and binary forms, with or without
|
|
|
++ * modification, are permitted provided that the following conditions
|
|
|
++ * are met:
|
|
|
++ *
|
|
|
++ * * Redistributions of source code must retain the above copyright
|
|
|
++ * notice, this list of conditions and the following disclaimer.
|
|
|
++ * * Redistributions in binary form must reproduce the above copyright
|
|
|
++ * notice, this list of conditions and the following disclaimer in
|
|
|
++ * the documentation and/or other materials provided with the
|
|
|
++ * distribution.
|
|
|
++ * * Neither the name of Broadcom Corporation nor the names of its
|
|
|
++ * contributors may be used to endorse or promote products derived
|
|
|
++ * from this software without specific prior written permission.
|
|
|
++ *
|
|
|
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
++ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
++ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
++ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
++ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
|
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
++ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
++ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
++ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
++ */
|
|
|
++
|
|
|
++/dts-v1/;
|
|
|
++
|
|
|
++#include "bcm4708.dtsi"
|
|
|
++#include "bcm5301x-nand-cs0-bch8.dtsi"
|
|
|
++
|
|
|
++/ {
|
|
|
++ model = "NorthStar Enterprise Router (BCM953012ER)";
|
|
|
++ compatible = "brcm,bcm953012er", "brcm,brcm53012", "brcm,bcm4708";
|
|
|
++
|
|
|
++ aliases {
|
|
|
++ serial0 = &uart0;
|
|
|
++ };
|
|
|
++
|
|
|
++ chosen {
|
|
|
++ stdout-path = "serial0:115200n8";
|
|
|
++ };
|
|
|
++
|
|
|
++ memory {
|
|
|
++ reg = <0x00000000 0x8000000>;
|
|
|
++ };
|
|
|
++
|
|
|
++ gpio-keys {
|
|
|
++ compatible = "gpio-keys";
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++
|
|
|
++ wps {
|
|
|
++ label = "WPS";
|
|
|
++ linux,code = <KEY_WPS_BUTTON>;
|
|
|
++ gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++
|
|
|
++ restart {
|
|
|
++ label = "Reset";
|
|
|
++ linux,code = <KEY_RESTART>;
|
|
|
++ gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&uart0 {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&spi_nor {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&srab {
|
|
|
++ status = "okay";
|
|
|
++
|
|
|
++ ports {
|
|
|
++ #address-cells = <1>;
|
|
|
++ #size-cells = <0>;
|
|
|
++
|
|
|
++ port@0 {
|
|
|
++ reg = <0>;
|
|
|
++ label = "port0";
|
|
|
++ };
|
|
|
++
|
|
|
++ port@1 {
|
|
|
++ reg = <1>;
|
|
|
++ label = "port1";
|
|
|
++ };
|
|
|
++
|
|
|
++ port@5 {
|
|
|
++ reg = <5>;
|
|
|
++ label = "cpu";
|
|
|
++ ethernet = <&gmac0>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
Rafał Miłecki