ramips: make ethernet register map u16 instead of u32

Signed-off-by: Felix Fietkau <[email protected]>

SVN-Revision: 44940

target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.c

@@ -65,7 +65,7 @@ static int fe_msg_level = -1;
 module_param_named(msg_level, fe_msg_level, int, 0);
 MODULE_PARM_DESC(msg_level, "Message level (-1=defaults,0=none,...,16=all)");
 
-static const u32 fe_reg_table_default[FE_REG_COUNT] = {
+static const u16 fe_reg_table_default[FE_REG_COUNT] = {
 	[FE_REG_PDMA_GLO_CFG] = FE_PDMA_GLO_CFG,
 	[FE_REG_PDMA_RST_CFG] = FE_PDMA_RST_CFG,
 	[FE_REG_DLY_INT_CFG] = FE_DLY_INT_CFG,
@@ -84,7 +84,7 @@ static const u32 fe_reg_table_default[FE_REG_COUNT] = {
 	[FE_REG_FE_RST_GL] = FE_FE_RST_GL,
 };
 
-static const u32 *fe_reg_table = fe_reg_table_default;
+static const u16 *fe_reg_table = fe_reg_table_default;
 
 struct fe_work_t {
 	int bitnr;

target/linux/ramips/files/drivers/net/ethernet/ralink/ralink_soc_eth.h

@@ -382,7 +382,7 @@ struct fe_phy {
 
 struct fe_soc_data
 {
-	const u32 *reg_table;
+	const u16 *reg_table;
 
 	void (*init_data)(struct fe_soc_data *data, struct net_device *netdev);
 	void (*reset_fe)(void);

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_mt7620.c

@@ -72,7 +72,7 @@
 #define MT7621_FE_GDM1_AF	BIT(28)
 #define MT7621_FE_GDM2_AF	BIT(29)
 
-static const u32 mt7620_reg_table[FE_REG_COUNT] = {
+static const u16 mt7620_reg_table[FE_REG_COUNT] = {
 	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
 	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
 	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,
@@ -92,7 +92,7 @@ static const u32 mt7620_reg_table[FE_REG_COUNT] = {
 	[FE_REG_FE_INT_STATUS2] = MT7620_FE_INT_STATUS2,
 };
 
-static const u32 mt7621_reg_table[FE_REG_COUNT] = {
+static const u16 mt7621_reg_table[FE_REG_COUNT] = {
 	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
 	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
 	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,

target/linux/ramips/files/drivers/net/ethernet/ralink/soc_rt305x.c

@@ -25,7 +25,7 @@
 #define RT305X_RESET_FE         BIT(21)
 #define RT305X_RESET_ESW        BIT(23)
 
-static const u32 rt5350_reg_table[FE_REG_COUNT] = {
+static const u16 rt5350_reg_table[FE_REG_COUNT] = {
 	[FE_REG_PDMA_GLO_CFG] = RT5350_PDMA_GLO_CFG,
 	[FE_REG_PDMA_RST_CFG] = RT5350_PDMA_RST_CFG,
 	[FE_REG_DLY_INT_CFG] = RT5350_DLY_INT_CFG,