ipq40xx: set IMAGES in Device/Default definition

The Device/Default definition sets a default IMAGE/sysupgrade.bin,
but does not enable it by setting IMAGES. This is not consistent,
and has led to IMAGES being defined at various other places in the
file.

Thus, this patch consolidates the default value for IMAGES by putting
it in Device/Default. Since it's still overwritten where necessary,
this patch is cosmetic.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ipq40xx/image/Makefile

@@ -13,6 +13,7 @@ define Device/Default
 	KERNEL_LOADADDR := 0x80208000
 	DEVICE_DTS = $$(SOC)-$(lastword $(subst _, ,$(1)))
 	SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
+	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin = sysupgrade-tar | append-metadata
 	IMAGE/sysupgrade.bin/squashfs :=
 endef
@@ -46,7 +47,7 @@ define Device/DniImage
 	$(call Device/FitzImage)
 	NETGEAR_BOARD_ID :=
 	NETGEAR_HW_ID :=
-	IMAGES := factory.img sysupgrade.bin
+	IMAGES += factory.img
 	IMAGE/factory.img := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | append-rootfs | pad-rootfs | netgear-dni
 	IMAGE/sysupgrade.bin := append-kernel | pad-offset 64k 64 | append-uImage-fakehdr filesystem | \
 		append-rootfs | pad-rootfs | append-metadata | check-size
@@ -110,7 +111,6 @@ define Device/8dev_habanero-dvk
 	IMAGE_SIZE := 30976k
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := ipq-wifi-8dev_habanero-dvk
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | append-rootfs | pad-rootfs | append-metadata | check-size
 endef
 TARGET_DEVICES += 8dev_habanero-dvk
@@ -151,7 +151,6 @@ define Device/aruba_glenmorangie
 	DEVICE_VENDOR := Aruba
 	SOC := qcom-ipq4029
 	DEVICE_PACKAGES := ipq-wifi-aruba_ap-303
-	IMAGES := sysupgrade.bin
 endef
 
 define Device/aruba_ap-303
@@ -178,7 +177,6 @@ define Device/asus_map-ac2200
 	DEVICE_VENDOR := ASUS
 	DEVICE_MODEL := Lyra (MAP-AC2200)
 	SOC := qcom-ipq4019
-	IMAGES := sysupgrade.bin
 	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct kmod-ath3k
 endef
 TARGET_DEVICES += asus_map-ac2200
@@ -199,7 +197,6 @@ define Device/asus_rt-ac58u
 #	to add a version... or we are very careful not to add '\0' into that
 #	string and call it a day.... Yeah, we do the latter!
 	UIMAGE_NAME:=$(shell echo -e '\03\01\01\01RT-AC58U')
-	IMAGES := sysupgrade.bin
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
 		kmod-usb-ledtrig-usbport
 endef
@@ -214,7 +211,7 @@ define Device/avm_fritzbox-4040
 	IMAGE_SIZE := 29056k
 	UBOOT_PATH := $(STAGING_DIR_IMAGE)/uboot-fritz4040.bin
 	UBOOT_PARTITION_SIZE := 524288
-	IMAGES = eva.bin sysupgrade.bin
+	IMAGES += eva.bin
 	IMAGE/eva.bin := append-uboot | pad-to $$$$(UBOOT_PARTITION_SIZE) | append-kernel | append-rootfs | pad-rootfs
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 	DEVICE_PACKAGES := fritz-tffs fritz-caldata
@@ -227,7 +224,6 @@ define Device/avm_fritzbox-7530
 	DEVICE_MODEL := FRITZ!Box 7530
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand
-	IMAGES := sysupgrade.bin
 endef
 TARGET_DEVICES += avm_fritzbox-7530
 
@@ -237,7 +233,6 @@ define Device/avm_fritzrepeater-1200
 	DEVICE_MODEL := FRITZ!Repeater 1200
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := fritz-caldata fritz-tffs-nand ipq-wifi-avm_fritzrepeater-1200
-	IMAGES := sysupgrade.bin
 endef
 TARGET_DEVICES += avm_fritzrepeater-1200
 
@@ -247,7 +242,6 @@ define Device/avm_fritzrepeater-3000
 	DEVICE_MODEL := FRITZ!Repeater 3000
 	SOC := qcom-ipq4019
 	DEVICE_PACKAGES := ath10k-firmware-qca9984-ct fritz-caldata fritz-tffs-nand
-	IMAGES := sysupgrade.bin
 endef
 TARGET_DEVICES += avm_fritzrepeater-3000
 
@@ -304,7 +298,7 @@ define Device/compex_wpj428
 	BLOCKSIZE := 64k
 	IMAGE_SIZE := 31232k
 	KERNEL_SIZE := 4096k
-	IMAGES = sysupgrade.bin cpximg-6a04.bin
+	IMAGES += cpximg-6a04.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/cpximg-6a04.bin := append-kernel | append-rootfs | pad-rootfs | mkmylofw_32m 0x8A2 3
 	DEVICE_PACKAGES := kmod-gpio-beeper
@@ -321,7 +315,7 @@ define Device/dlink_dap-2610
 	WRGG_DEVNAME := /dev/mtdblock/8
 	WRGG_SIGNATURE := wapac30_dkbs_dap2610
 	IMAGE_SIZE := 14080k
-	IMAGES := sysupgrade.bin factory.bin
+	IMAGES += factory.bin
 	# Bootloader expects a special 160 byte header which is added by
 	# wrgg-image.
 	# Factory image size must be larger than 6MB, and size in wrgg header must
@@ -347,7 +341,6 @@ define Device/engenius_eap1300
 	SOC := qcom-ipq4018
 	KERNEL_SIZE := 5120k
 	IMAGE_SIZE := 25344k
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 endef
 TARGET_DEVICES += engenius_eap1300
@@ -371,7 +364,7 @@ define Device/engenius_emd1
 	DEVICE_DTS_CONFIG := config@4
 	SOC := qcom-ipq4018
 	IMAGE_SIZE := 30720k
-	IMAGES := sysupgrade.bin factory.bin
+	IMAGES += factory.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 endef
@@ -385,7 +378,7 @@ define Device/engenius_emr3500
 	SOC := qcom-ipq4018
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 30720k
-	IMAGES := sysupgrade.bin factory.bin
+	IMAGES += factory.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	IMAGE/factory.bin := qsdk-ipq-factory-nor | check-size
 endef
@@ -410,7 +403,7 @@ define Device/engenius_ens620ext
 	IMAGE_SIZE := 21312k
 	KERNEL_SIZE := 5120k
 	FILESYSTEMS := squashfs
-	IMAGES := sysupgrade.bin factory_30.bin factory_35.bin
+	IMAGES += factory_30.bin factory_35.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 	IMAGE/factory_30.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size | SenaoFW $$$$(PRODUCT_ID) $$$$(FW_VER)
 	IMAGE/factory_35.bin := qsdk-ipq-factory-nor | check-size | SenaoFW $$$$(PRODUCT_ID_NEW) $$$$(FW_VER_NEW)
@@ -425,7 +418,6 @@ define Device/ezviz_cs-w3-wd1200g-eup
 	DEVICE_DTS_CONFIG := config@4
 	IMAGE_SIZE := 14848k
 	SOC := qcom-ipq4018
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | \
 		append-metadata
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers \
@@ -441,7 +433,6 @@ define Device/glinet_gl-b1300
 	SOC := qcom-ipq4029
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 26624k
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel |append-rootfs | pad-rootfs | append-metadata
 endef
 TARGET_DEVICES += glinet_gl-b1300
@@ -477,7 +468,7 @@ define Device/linksys_ea6350v3
 	KERNEL_SIZE := 3072k
 	IMAGE_SIZE := 37888k
 	UBINIZE_OPTS := -E 5
-	IMAGES := factory.bin sysupgrade.bin
+	IMAGES += factory.bin
 	IMAGE/factory.bin := append-kernel | append-uImage-fakehdr filesystem | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA6350v3
 	DEVICE_PACKAGES := uboot-envtools
 endef
@@ -493,7 +484,7 @@ define Device/linksys_ea8300
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 	UBINIZE_OPTS := -E 5    # EOD marks to "hide" factory sig at EOF
-	IMAGES := sysupgrade.bin factory.bin
+	IMAGES += factory.bin
 	IMAGE/factory.bin  := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | linksys-image type=EA8300
 	DEVICE_PACKAGES := uboot-envtools ath10k-firmware-qca9888-ct ipq-wifi-linksys_ea8300 kmod-usb-ledtrig-usbport
 endef
@@ -506,7 +497,6 @@ define Device/meraki_mr33
 	SOC := qcom-ipq4029
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
-	IMAGES = sysupgrade.bin
 	DEVICE_PACKAGES := -swconfig ath10k-firmware-qca9887-ct
 endef
 TARGET_DEVICES += meraki_mr33
@@ -557,7 +547,7 @@ define Device/openmesh_a42
 	BLOCKSIZE := 64k
 	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15616k
-	IMAGES = factory.bin sysupgrade.bin
+	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A42
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := uboot-envtools
@@ -573,7 +563,7 @@ define Device/openmesh_a62
 	BLOCKSIZE := 64k
 	KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/$$(DEVICE_DTS).dtb | pad-to $$(BLOCKSIZE)
 	IMAGE_SIZE := 15552k
-	IMAGES = factory.bin sysupgrade.bin
+	IMAGES += factory.bin
 	IMAGE/factory.bin := append-rootfs | pad-rootfs | openmesh-image ce_type=A62
 	IMAGE/sysupgrade.bin/squashfs := append-rootfs | pad-rootfs | sysupgrade-tar rootfs=$$$$@ | append-metadata
 	DEVICE_PACKAGES := ath10k-firmware-qca9888-ct uboot-envtools
@@ -592,7 +582,6 @@ define Device/qcom_ap-dk01.1-c1
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 26624k
 	$(call Device/FitImage)
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | append-metadata
 endef
 TARGET_DEVICES += qcom_ap-dk01.1-c1
@@ -622,7 +611,6 @@ define Device/qxwlan_e2600ac-c1
 	SOC := qcom-ipq4019
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 	DEVICE_PACKAGES := ipq-wifi-qxwlan_e2600ac
 endef
@@ -651,7 +639,6 @@ define Device/unielec_u4019-32m
 	SOC := qcom-ipq4019
 	KERNEL_SIZE := 4096k
 	IMAGE_SIZE := 31232k
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
 endef
 TARGET_DEVICES += unielec_u4019-32m
@@ -667,7 +654,7 @@ define Device/zyxel_nbg6617
 	RAS_ROOTFS_SIZE := 19840k
 	RAS_VERSION := "$(VERSION_DIST) $(REVISION)"
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
-	IMAGES := sysupgrade.bin factory.bin
+	IMAGES += factory.bin
 #	The ZyXEL firmware allows flashing thru the web-gui only when the rootfs is
 #	at least as large as the one of the initial firmware image (not the current
 #	one on the device). This only applies to the Web-UI, the bootlaoder ignores
@@ -685,7 +672,6 @@ define Device/zyxel_wre6606
 	DEVICE_DTS_CONFIG := config@4
 	SOC := qcom-ipq4018
 	IMAGE_SIZE := 13184k
-	IMAGES := sysupgrade.bin
 	IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size
 	DEVICE_PACKAGES := -kmod-ath10k-ct kmod-ath10k-ct-smallbuffers
 endef