ath79: drop redundant label with new LED color/function format

Drop redundant label with new LED color/function format declared.
This was needed previously when the new format wasn't supported by
leds.sh functions script. Now that is supported this property
can be removed in favor of the new format.

Signed-off-by: Christian Marangi <[email protected]>

target/linux/ath79/dts/ar9344_embeddedwireless_balin.dts

@@ -25,7 +25,6 @@
 		compatible = "gpio-leds";
 
 		led_system: led-0 {
-			label = "green:system";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/ar9344_moxa_awk-1137c.dts

@@ -34,7 +34,6 @@
 		pinctrl-names = "default";
 
 		led_status_green: led-0 {
-			label = "green:status";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 			function-enumerator = <0>;
@@ -42,7 +41,6 @@
 		};
 
 		led_status_red: led-1 {
-			label = "red:status";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 			function-enumerator = <1>;
@@ -50,7 +48,6 @@
 		};
 
 		led-2 {
-			label = "green:wifi";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_WLAN;
 			function-enumerator = <0>;
@@ -59,21 +56,18 @@
 		};
 
 		led-3 {
-			label = "green:lan1";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_WAN;
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
 		led-4 {
-			label = "green:lan2";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_LAN;
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
 		};
 
 		led-5 {
-			label = "yellow:wifi";
 			color = <LED_COLOR_ID_YELLOW>;
 			function = LED_FUNCTION_WLAN;
 			function-enumerator = <1>;

target/linux/ath79/dts/ar9344_wd_mynet-n600.dts

@@ -24,7 +24,6 @@
 		};
 
 		led_power: led-1 {
-			label = "blue:power";
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 11 GPIO_ACTIVE_HIGH>;

target/linux/ath79/dts/qca9531_letv_lba-047-ch.dts

@@ -33,21 +33,18 @@
 		compatible = "gpio-leds";
 
 		led_status_blue: led-0 {
-			label = "blue:status";
 			color = <LED_COLOR_ID_BLUE>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
 		led_status_green: led-1 {
-			label = "green:status";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
 		};
 
 		led_status_red: led-2 {
-			label = "red:status";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9550_airtight_c-75.dts

@@ -32,14 +32,12 @@
 		compatible = "gpio-leds";
 
 		led_power_amber: power-amber {
-			label = "amber:power";
 			color = <LED_COLOR_ID_AMBER>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
 		led_power_green: power-green {
-			label = "green:power";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9557_meraki_mr18.dts

@@ -66,17 +66,14 @@
 
 #else
 		red {
-			label = "red:tricolor";
 			color = <LED_COLOR_ID_RED>;
 		};
 
 		green: green {
-			label = "green:tricolor";
 			color = <LED_COLOR_ID_GREEN>;
 		};
 
 		blue {
-			label = "blue:tricolor";
 			color = <LED_COLOR_ID_BLUE>;
 		};
 #endif

target/linux/ath79/dts/qca9558_dlink_dir-629-a1.dts

@@ -46,7 +46,6 @@
 		};
 
 		led_power: led-1 {
-			label = "green:power";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 21 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9558_jjplus_jwap230.dts

@@ -21,7 +21,6 @@
 		compatible = "gpio-leds";
 
 		led_power: led-0 {
-			label = "green:power";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 23 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9563_dlink_dir-859-a3.dts

@@ -20,7 +20,6 @@
 		compatible = "gpio-leds";
 
 		led_power: power {
-			label = "green:power";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_POWER;
 			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;

target/linux/ath79/dts/qca9563_tplink_eap225-v1.dts

@@ -18,7 +18,6 @@
 		compatible = "gpio-leds";
 
 		led_status_green: led-0 {
-			label = "green:status";
 			color = <LED_COLOR_ID_GREEN>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
@@ -26,14 +25,12 @@
 		};
 
 		led_status_amber: led-1 {
-			label = "amber:status";
 			color = <LED_COLOR_ID_AMBER>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 9 GPIO_ACTIVE_HIGH>;
 		};
 
 		led_status_red: led-2 {
-			label = "red:status";
 			color = <LED_COLOR_ID_RED>;
 			function = LED_FUNCTION_STATUS;
 			gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;

target/linux/ath79/dts/qca9563_zte_mf281.dts

@@ -16,7 +16,6 @@
 };
 
 &led_debug {
-	label = "green:debug";
 	color = <LED_COLOR_ID_GREEN>;
 };
 

target/linux/ath79/dts/qca9563_zte_mf282.dts

@@ -28,7 +28,6 @@
 };
 
 &led_debug {
-	label = "blue:debug";
 	color = <LED_COLOR_ID_BLUE>;
 };