uboot-sunxi: bump to 2019.01

Tested on:
Bananapro (A20)
Banana Pi M3 (A83t)
Linksprite pcDuino3 (A20)
Olinuxino Lime (A10)
Orange Pi 2 (H3)
Pine64 (A64)

Patches refreshed.

Signed-off-by: Zoltan HERPAI <[email protected]>

package/boot/uboot-sunxi/Makefile

@@ -9,9 +9,9 @@
 include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
-PKG_VERSION:=2018.11
+PKG_VERSION:=2019.01
 
-PKG_HASH:=737c93f2ea03fec669e840dbee32bcf6238e6924ff5f20e4f1c472ee24e5d37e
+PKG_HASH:=50bd7e5a466ab828914d080d5f6a432345b500e8fba1ad3b7b61e95e60d51c22
 
 PKG_MAINTAINER:=Zoltan HERPAI <[email protected]>
 

package/boot/uboot-sunxi/patches/003-add-theobroma-a31-pangolin.patch

@@ -1,6 +1,6 @@
 --- a/arch/arm/dts/Makefile
 +++ b/arch/arm/dts/Makefile
-@@ -306,6 +306,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
+@@ -313,6 +313,7 @@ dtb-$(CONFIG_MACH_SUN6I) += \
  	sun6i-a31-m9.dtb \
  	sun6i-a31-mele-a1000g-quad.dtb \
  	sun6i-a31-mixtile-loftq.dtb \
@@ -358,7 +358,7 @@
 +CONFIG_SUNXI_SPI=y
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -872,6 +872,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
+@@ -875,6 +875,14 @@ config VIDEO_LCD_PANEL_I2C_SCL
  	Set the SCL pin for the LCD i2c interface. This takes a string in the
  	format understood by sunxi_name_to_gpio, e.g. PH1 for pin 1 of port H.
  

package/boot/uboot-sunxi/patches/062-A20-improve-gmac-upload.patch

@@ -8,5 +8,5 @@
  CONFIG_SUN7I_GMAC=y
 +CONFIG_GMAC_TX_DELAY=1
  CONFIG_AXP_ALDO3_VOLT=2800
- CONFIG_AXP_ALDO4_VOLT=2800
- CONFIG_SCSI=y
+ CONFIG_AXP_ALDO3_VOLT_SLOPE_08=y
+ CONFIG_AXP_ALDO3_INRUSH_QUIRK=y

package/boot/uboot-sunxi/patches/102-sunxi-make_CONS_INDEX-configurable.patch

@@ -6,7 +6,7 @@ Subject: ARM: sunxi: Make CONS_INDEX configurable
 
 --- a/arch/arm/mach-sunxi/Kconfig
 +++ b/arch/arm/mach-sunxi/Kconfig
-@@ -535,6 +535,14 @@ config SYS_BOARD
+@@ -538,6 +538,14 @@ config SYS_BOARD
  config SYS_SOC
  	default "sunxi"
  

package/boot/uboot-sunxi/patches/210-sunxi-deactivate-binman.patch

@@ -12,7 +12,7 @@ old way of generating images.
 
 --- a/Makefile
 +++ b/Makefile
-@@ -1255,8 +1255,10 @@ endif
+@@ -1344,8 +1344,10 @@ endif
  
  ifneq ($(CONFIG_ARCH_SUNXI),)
  ifeq ($(CONFIG_ARM64),)
@@ -27,7 +27,7 @@ old way of generating images.
  	$(call if_changed,cat)
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -820,7 +820,6 @@ config ARCH_SOCFPGA
+@@ -842,7 +842,6 @@ config ARCH_SOCFPGA
  
  config ARCH_SUNXI
  	bool "Support sunxi (Allwinner) SoCs"