ramips: fix OMNI-PLUG.dts

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 42232

target/linux/ramips/dts/OMNI-PLUG.dts

@@ -111,116 +111,3 @@
 		status = "okay";
 	};
 };
-/dts-v1/;
-
-/include/ "rt5350.dtsi"
-
-/ {
-	compatible = "OMNI-PLUG", "ralink,rt5350-soc";
-	model = "Omnima MiniPlug";
-	
-	pinctrl {
-		state_default: pinctrl0 {
-			gpio {
-				ralink,group = "i2c", "jtag", "uartf";
-				ralink,function = "gpio";
-			};
-		};
-	};
-	
-	gpio-leds {
-		compatible = "gpio-leds";
-		wlan {
-			label = "miniplug:red:wlan";
-			gpios = <&gpio0 9 0>;
-		};
-		mobile {
-			label = "miniplug:green:mobile";
-			gpios = <&gpio0 13 1>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <20>;
-		wps {
-			label = "wps";
-			gpios = <&gpio0 0 1>;
-			linux,code = <0x211>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&gpio0 10 1>;
-			linux,code = <0x211>;
-		};
-		mode-one {
-			label = "mode1";
-			gpios = <&gpio0 11 1>;
-			linux,code = <0x211>;
-		};
-		mode-two {
-			label = "mode2";
-			gpios = <&gpio0 12 1>;
-			linux,code = <0x211>;
-		};
-	};
-
-	palmbus@10000000 {
-		gpio0: gpio@600 {
-			status = "okay";
-		};
-
-		spi@b00 {
-			status = "okay";
-			m25p80@0 {
-				#address-cells = <1>;
-				#size-cells = <1>;
-				compatible = "mx25l6405d";
-				reg = <0 0>;
-				linux,modalias = "m25p80", "mx25l6405d";
-				spi-max-frequency = <10000000>;
-
-				partition@0 {
-					label = "u-boot";
-					reg = <0x0 0x30000>;
-					read-only;
-				};
-
-				partition@30000 {
-					label = "u-boot-env";
-					reg = <0x30000 0x10000>;
-					read-only;
-				};
-
-				factory: partition@40000 {
-					label = "factory";
-					reg = <0x40000 0x10000>;
-					read-only;
-				};
-
-				partition@50000 {
-					label = "firmware";
-					reg = <0x50000 0x7b0000>;
-				};
-			};
-		};
-	};
-	
-	ethernet@10100000 {
-		mtd-mac-address = <&factory 0x4>;
-	};
-
-	esw@10110000 {
-		ralink,portmap = <0x2f>;
-	};
-
-	wmac@10180000 {
-		ralink,mtd-eeprom = <&factory 0>;
-	};
-	
-	otg@101c0000 {
-		status = "okay";
-	};
-};