ipq40xx: convert Buffalo WTR-M2133HP to DSA

This commit convert WTR-M2133HP to DSA setup.

Signed-off-by: Yanase Yuki <[email protected]>

target/linux/ipq40xx/base-files/etc/board.d/02_network

@@ -82,6 +82,7 @@ ipq40xx_setup_interfaces()
 		ucidef_set_interface_lan "sw-eth1 sw-eth2"
 		;;
 	aruba,ap-303h|\
+	buffalo,wtr-m2133hp|\
 	ezviz,cs-w3-wd1200g-eup|\
 	netgear,rbr50|\
 	netgear,rbs50|\

target/linux/ipq40xx/files/arch/arm/boot/dts/qcom-ipq4019-wtr-m2133hp.dts

@@ -417,6 +417,35 @@
 	qcom,ath10k-calibration-variant = "Buffalo-WTR-M2133HP";
 };
 
+&switch {
+	status = "okay";
+};
+
+&swport2 {
+	status = "okay";
+	label = "lan3";
+};
+
+&swport3 {
+	status = "okay";
+	label = "lan2";
+};
+
+&swport4 {
+	status = "okay";
+	label = "lan1";
+};
+
+&swport5 {
+	status = "okay";
+};
+
+&gmac {
+	status = "okay";
+	nvmem-cell-names = "mac-address";
+	nvmem-cells = <&macaddr_orgdata_20>;
+};
+
 &mdio {
 	status = "okay";
 	pinctrl-0 = <&mdio_pins>;

target/linux/ipq40xx/image/generic.mk

@@ -305,8 +305,7 @@ define Device/buffalo_wtr-m2133hp
 	BLOCKSIZE := 128k
 	PAGESIZE := 2048
 endef
-# Missing DSA Setup
-#TARGET_DEVICES += buffalo_wtr-m2133hp
+TARGET_DEVICES += buffalo_wtr-m2133hp
 
 define Device/cellc_rtl30vw
 	KERNEL_SUFFIX := -zImage.itb