mvebu: use device-tree board detection

Convert whole target to Device Tree based board detection instead of
identifying devices by dts file name. With this we can drop mvebu.sh
translation script and rely on common method for model detection.

Signed-off-by: Tomasz Maciej Nowak <[email protected]>

package/boot/uboot-envtools/files/mvebu

@@ -14,25 +14,25 @@ touch /etc/config/ubootenv
 board=$(board_name)
 
 case "$board" in
-armada-385-linksys-caiman|\
-armada-385-linksys-cobra|\
-armada-385-linksys-shelby)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x40000"
-	;;
-armada-385-linksys-rango|\
-armada-385-linksys-venom)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
-	;;
-armada-385-turris-omnia)
+cznic,turris-omnia)
 	ubootenv_add_uci_config "/dev/mtd0" "0xC0000" "0x10000" "0x40000"
 	;;
-armada-xp-linksys-mamba)
-	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
-	;;
 globalscale,espressobin|\
 marvell,armada8040-mcbin)
 	ubootenv_add_uci_config "/dev/mtd0" "0x3f0000" "0x10000" "0x10000" "1"
 	;;
+linksys,caiman|\
+linksys,cobra|\
+linksys,shelby)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x40000"
+	;;
+linksys,mamba)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
+	;;
+linksys,rango|\
+linksys,venom)
+	ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x20000" "0x20000"
+	;;
 esac
 
 config_load ubootenv

target/linux/mvebu/base-files/etc/board.d/01_leds

@@ -11,42 +11,42 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-armada-385-linksys-caiman)
+linksys,caiman)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:caiman:white:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:caiman:white:usb2" "usb1-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:caiman:white:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:caiman:white:usb3_2" "usb3-port1"
 	;;
-armada-385-linksys-cobra)
+linksys,cobra)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:cobra:white:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:cobra:white:usb2" "usb1-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:cobra:white:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:cobra:white:usb3_2" "usb3-port1"
 	;;
-armada-385-linksys-rango)
+linksys,mamba)
+	ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
+	ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
+	ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1"
+	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2"
+	;;
+linksys,rango)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:rango:white:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:rango:white:usb2" "usb1-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:rango:white:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:rango:white:usb3_2" "usb3-port1"
 	;;
-armada-385-linksys-shelby)
+linksys,shelby)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:shelby:white:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:shelby:white:usb2" "usb1-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:shelby:white:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:shelby:white:usb3_2" "usb3-port1"
 	;;
-armada-385-linksys-venom)
+linksys,venom)
 	ucidef_set_led_netdev "wan" "WAN" "pca963x:venom:blue:wan" "eth1"
 	ucidef_set_led_usbport "usb1" "USB 1" "pca963x:venom:blue:usb2" "usb1-port1"
 	ucidef_set_led_usbport "usb2" "USB 2" "pca963x:venom:blue:usb3_1" "usb2-port1" "usb3-port1"
 	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "pca963x:venom:blue:usb3_2" "usb3-port1"
 	;;
-armada-xp-linksys-mamba)
-	ucidef_set_led_netdev "wan" "WAN" "mamba:white:wan" "eth1"
-	ucidef_set_led_usbport "usb1" "USB 1" "mamba:white:usb2" "usb1-port1"
-	ucidef_set_led_usbport "usb2" "USB 2" "mamba:white:usb3_1" "usb2-port1" "usb3-port1"
-	ucidef_set_led_usbport "usb2_ss" "USB 2 SS" "mamba:white:usb3_2" "usb3-port2"
-	;;
 
 esac
 

target/linux/mvebu/base-files/etc/board.d/02_network

@@ -11,24 +11,42 @@ board_config_update
 board=$(board_name)
 
 case "$board" in
-armada-385-db-ap)
-	ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+cznic,turris-omnia)
+	ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
+	ucidef_set_interface_wan "eth2"
+	;;
+globalscale,espressobin)
+	ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
 	;;
-armada-385-linksys-caiman|\
-armada-385-linksys-cobra|\
-armada-385-linksys-rango|\
-armada-385-linksys-shelby|\
-armada-385-linksys-venom|\
-armada-xp-linksys-mamba)
+linksys,caiman|\
+linksys,cobra|\
+linksys,mamba|\
+linksys,rango|\
+linksys,shelby|\
+linksys,venom)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth1.2"
 	ucidef_add_switch "switch0" \
 		"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5@eth0" "4:wan" "6@eth1"
 	;;
-armada-385-turris-omnia)
-	ucidef_set_interface_lan "lan0 lan1 lan2 lan3 lan4"
-	ucidef_set_interface_wan "eth2"
+marvell,a385-db-ap)
+	ucidef_set_interfaces_lan_wan "eth0 eth1" "eth2"
+	;;
+marvell,armada8040-mcbin)
+	ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
+	;;
+marvell,armada8040-db)
+	ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
+	;;
+marvell,armada7040-db)
+	ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
+	;;
+marvell,armada-3720-db)
+	ucidef_set_interfaces_lan_wan "eth1" "eth0"
+	;;
+marvell,axp-gp)
+	ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
 	;;
-armada-388-clearfog-*)
+solidrun,clearfog*a1)
 	# eth0 is standalone ethernet
 	# eth1 is switch (-pro) or standalone ethernet (-base)
 	# eth2 is SFP
@@ -40,24 +58,6 @@ armada-388-clearfog-*)
 		ucidef_add_switch "switch0" \
 			"0:lan:5" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5u@eth1" "6:lan:6"
 	;;
-armada-xp-gp)
-	ucidef_set_interface_lan "eth0 eth1 eth2 eth3"
-	;;
-globalscale,espressobin)
-	ucidef_set_interfaces_lan_wan "lan0 lan1" "wan"
-	;;
-marvell,armada-3720-db)
-	ucidef_set_interfaces_lan_wan "eth1" "eth0"
-	;;
-marvell,armada8040-mcbin)
-	ucidef_set_interfaces_lan_wan "eth0 eth1 eth3" "eth2"
-	;;
-marvell,armada8040-db)
-	ucidef_set_interfaces_lan_wan "eth0 eth2 eth3" "eth1"
-	;;
-marvell,armada7040-db)
-	ucidef_set_interfaces_lan_wan "eth0 eth2" "eth1"
-	;;
 *)
 	ucidef_set_interface_lan "eth0"
 	;;

target/linux/mvebu/base-files/etc/diag.sh

@@ -7,24 +7,24 @@
 
 get_status_led() {
 	case $(board_name) in
-	armada-385-linksys-caiman)
+	linksys,caiman)
 		status_led="caiman:white:power"
 		;;
-	armada-385-linksys-cobra)
+	linksys,cobra)
 		status_led="cobra:white:power"
 		;;
-	armada-385-linksys-rango)
+	linksys,mamba)
+		status_led="mamba:white:power"
+		;;
+	linksys,rango)
 		status_led="rango:white:power"
 		;;
-	armada-385-linksys-shelby)
+	linksys,shelby)
 		status_led="shelby:white:power"
 		;;
-	armada-385-linksys-venom)
+	linksys,venom)
 		status_led="venom:blue:power"
 		;;
-	armada-xp-linksys-mamba)
-		status_led="mamba:white:power"
-		;;
 	esac
 }
 

target/linux/mvebu/base-files/etc/init.d/linksys_recovery

@@ -7,7 +7,7 @@ boot() {
 . /lib/functions.sh
 
 case $(board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+	linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
 		# make sure auto_recovery in uboot is always on
 		AUTO_RECOVERY_ENA="`fw_printenv -n auto_recovery`"
 		if [ "$AUTO_RECOVERY_ENA" != "yes" ] ; then

target/linux/mvebu/base-files/etc/uci-defaults/03_wireless

@@ -11,7 +11,7 @@
 board=$(board_name)
 
 case "$board" in
-armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+linksys,caiman|linksys,cobra|linksys,mamba|linksys,shelby|linksys,venom)
 	SKU=$(strings /dev/mtd3|sed -ne 's/^cert_region=//p')
 	WIFIMAC2G=$(macaddr_add $(cat /sys/class/net/eth0/address) +1)
 	WIFIMAC5G=$(macaddr_add $WIFIMAC2G +1)
@@ -34,7 +34,7 @@ armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-shelby|arm
 	esac
 
 	case "$board" in
-		armada-xp-linksys-mamba)
+		linksys,mamba)
 			WIFIMAC0=$WIFIMAC2G
 			WIFIMAC1=$WIFIMAC5G
 		;;

target/linux/mvebu/base-files/etc/uci-defaults/04_mambafan

@@ -8,7 +8,7 @@
 board=$(board_name)
 
 case "$board" in
-armada-xp-linksys-mamba)
+linksys,mamba)
 	# Set fan script execution in crontab
 	grep -s -q fan_ctrl.sh /etc/crontabs/root && exit 0
 

target/linux/mvebu/base-files/lib/mvebu.sh

@@ -1,94 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013-2015 OpenWrt.org
-# Copyright (C) 2016 LEDE-Project.org
-#
-
-MVEBU_BOARD_NAME=
-MVEBU_MODEL=
-
-mvebu_board_detect() {
-	local machine
-	local name
-
-	machine=$(cat /proc/device-tree/model)
-
-	case "$machine" in
-	*"Marvell Armada 370 Evaluation Board")
-		name="armada-370-db"
-		;;
-	*"Globalscale Marvell ESPRESSOBin Board")
-		name="globalscale,espressobin"
-		;;
-	*"Marvell Armada 3720 Development Board DB-88F3720-DDR3")
-		name="marvell,armada-3720-db"
-		;;
-	*"Marvell 8040 MACCHIATOBin")
-		name="marvell,armada8040-mcbin"
-		;;
-	*"Marvell Armada 8040 DB board")
-		name="marvell,armada8040-db"
-		;;
-	*"Marvell Armada 7040 DB board")
-		name="marvell,armada7040-db"
-		;;
-	*"Globalscale Mirabox")
-		name="mirabox"
-		;;
-	*"Marvell Armada 370 Reference Design")
-		name="armada-370-rd"
-		;;
-	*"Marvell Armada XP Evaluation Board")
-		name="armada-xp-db"
-		;;
-	*"PlatHome OpenBlocks AX3-4 board")
-		name="openblocks-ax3-4"
-		;;
-	*"Marvell Armada XP GP Board")
-		name="armada-xp-gp"
-		;;
-	*"Linksys WRT1200AC")
-		name="armada-385-linksys-caiman"
-		;;
-	*"Linksys WRT1900AC")
-		name="armada-xp-linksys-mamba"
-		;;
-	*"Linksys WRT1900ACv2")
-		name="armada-385-linksys-cobra"
-		;;
-	*"Linksys WRT1900ACS")
-		name="armada-385-linksys-shelby"
-		;;
-	*"Linksys WRT3200ACM")
-		name="armada-385-linksys-rango"
-		;;
-	*"Linksys WRT32X")
-		name="armada-385-linksys-venom"
-		;;
-	*"Marvell Armada 385 Access Point Development Board")
-		name="armada-385-db-ap"
-		;;
-	*"Marvell Armada XP Development Board DB-MV784MP-GP")
-		name="armada-xp-gp"
-		;;
-	*"SolidRun Clearfog Pro A1")
-		name="armada-388-clearfog-pro"
-		;;
-	*"SolidRun Clearfog Base A1")
-		name="armada-388-clearfog-base"
-		;;
-	*"Turris Omnia")
-		name="armada-385-turris-omnia"
-		;;
-	esac
-
-	[ -z "$name" ] && name="unknown"
-
-	[ -z "$MVEBU_BOARD_NAME" ] && MVEBU_BOARD_NAME="$name"
-	[ -z "$MVEBU_MODEL" ] && MVEBU_MODEL="$machine"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
-	echo "$MVEBU_BOARD_NAME" > /tmp/sysinfo/board_name
-	echo "$MVEBU_MODEL" > /tmp/sysinfo/model
-}

target/linux/mvebu/base-files/lib/preinit/01_sysinfo

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_sysinfo_mvebu() {
-	. /lib/mvebu.sh
-
-	mvebu_board_detect
-}
-
-boot_hook_add preinit_main do_sysinfo_mvebu

target/linux/mvebu/base-files/lib/preinit/06_set_iface_mac

@@ -9,12 +9,7 @@ preinit_set_mac_address() {
 	. /lib/functions.sh
 
 	case $(board_name) in
-	armada-xp-linksys-mamba)
-		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
-		ip link set dev eth0 address $mac 2>/dev/null
-		ip link set dev eth1 address $mac 2>/dev/null
-		;;
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom)
+	linksys,caiman|linksys,cobra|linksys,rango|linksys,shelby|linksys,venom)
 		# rename interfaces back to the way they were with 4.4
 		case "$(readlink /sys/class/net/eth0)" in
 			*f1070000*)
@@ -29,7 +24,12 @@ preinit_set_mac_address() {
 		ip link set dev eth1 address $mac 2>/dev/null
 		ip link set dev eth0 address $mac_wan 2>/dev/null
 		;;
-	armada-385-db-ap|armada-388-clearfog)
+	linksys,mamba)
+		mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
+		ip link set dev eth0 address $mac 2>/dev/null
+		ip link set dev eth1 address $mac 2>/dev/null
+		;;
+	marvell,a385-db-ap|solidrun,clearfog*a1)
 		# rename interfaces back to the way they were with 4.4
 		case "$(readlink /sys/class/net/eth0)" in
 			*f1070000*)

target/linux/mvebu/base-files/lib/preinit/79_move_config

@@ -9,7 +9,7 @@ move_config() {
 
 	if export_bootdevice && export_partdevice partdev 1; then
 		case $(board_name) in
-			armada-385-turris-omnia)
+			cznic,turris-omnia)
 			insmod nls_cp437
 			insmod nls_iso8859-1
 			insmod fat

target/linux/mvebu/base-files/lib/preinit/81_linksys_syscfg

@@ -8,7 +8,7 @@ preinit_mount_syscfg() {
 	. /lib/functions.sh
 
 	case $(board_name) in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+	linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
 		needs_recovery=0
 		syscfg_part=$(grep syscfg /proc/mtd |cut -c4)
 		ubiattach -m $syscfg_part || needs_recovery=1

target/linux/mvebu/base-files/lib/upgrade/platform.sh

@@ -9,7 +9,7 @@ REQUIRE_IMAGE_METADATA=1
 
 platform_check_image() {
 	case "$(board_name)" in
-	armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+	cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
 		platform_check_image_sdcard "$ARGV"
 		;;
 	*)
@@ -20,10 +20,10 @@ platform_check_image() {
 
 platform_do_upgrade() {
 	case "$(board_name)" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+	linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
 		platform_do_upgrade_linksys "$ARGV"
 		;;
-	armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+	cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
 		platform_do_upgrade_sdcard "$ARGV"
 		;;
 	*)
@@ -33,10 +33,10 @@ platform_do_upgrade() {
 }
 platform_copy_config() {
 	case "$(board_name)" in
-	armada-385-linksys-caiman|armada-385-linksys-cobra|armada-385-linksys-rango|armada-385-linksys-shelby|armada-385-linksys-venom|armada-xp-linksys-mamba)
+	linksys,caiman|linksys,cobra|linksys,mamba|linksys,rango|linksys,shelby|linksys,venom)
 		platform_copy_config_linksys
 		;;
-	armada-385-turris-omnia|armada-388-clearfog-base|armada-388-clearfog-pro|globalscale,espressobin|marvell,armada8040-mcbin)
+	cznic,turris-omnia|globalscale,espressobin|marvell,armada8040-mcbin|solidrun,clearfog-base-a1|solidrun,clearfog-pro-a1)
 		platform_copy_config_sdcard "$ARGV"
 		;;
 	esac

target/linux/mvebu/base-files/lib/upgrade/sdcard.sh

@@ -91,7 +91,7 @@ platform_do_upgrade_sdcard() {
 	get_image "$@" | dd of="/dev/$diskdev" bs=1 skip=440 count=4 seek=440 conv=fsync
 
 	case "$board" in
-	armada-385-turris-omnia)
+	cznic,turris-omnia)
 		fw_setenv openwrt_bootargs 'earlyprintk console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=auto rootwait'
 		fw_setenv openwrt_mmcload 'setenv bootargs "$openwrt_bootargs cfg80211.freg=$regdomain"; fatload mmc 0 0x01000000 zImage; fatload mmc 0 0x02000000 armada-385-turris-omnia.dtb'
 		fw_setenv factory_mmcload 'setenv bootargs "$bootargs cfg80211.freg=$regdomain"; btrload mmc 0 0x01000000 boot/zImage @; btrload mmc 0 0x02000000 boot/dtb @'

target/linux/mvebu/image/Makefile

@@ -76,7 +76,7 @@ define Device/Default
   IMAGES := sysupgrade.bin
   IMAGE/factory.img := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-ubi | pad-to $$$$(PAGESIZE)
   IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
-  SUPPORTED_DEVICES = $$(firstword $$(DEVICE_DTS))
+  SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
   UBINIZE_OPTS := -E 5
   UBOOT :=
   BOOT_SCRIPT :=

target/linux/mvebu/image/cortex-a53.mk

@@ -4,7 +4,6 @@ define Device/globalscale_espressobin
   $(call Device/Default-arm64)
   DEVICE_TITLE := ESPRESSObin (Marvell Armada 3700 Community Board)
   DEVICE_DTS := armada-3720-espressobin
-  SUPPORTED_DEVICES := globalscale,espressobin
 endef
 TARGET_DEVICES += globalscale_espressobin
 
@@ -12,7 +11,6 @@ define Device/marvell_armada-3720-db
   $(call Device/Default-arm64)
   DEVICE_TITLE := Marvell Armada 3720 Development Board DB-88F3720-DDR3
   DEVICE_DTS := armada-3720-db
-  SUPPORTED_DEVICES := marvell,armada-3720-db
 endef
 TARGET_DEVICES += marvell_armada-3720-db
 

target/linux/mvebu/image/cortex-a72.mk

@@ -14,7 +14,6 @@ define Device/marvell_armada8040-db
   DEVICE_TITLE := Marvell Armada 8040 DB board
   DEVICE_DTS := armada-8040-db
   IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
-  SUPPORTED_DEVICES := marvell,armada8040-db
 endef
 TARGET_DEVICES += marvell_armada8040-db
 
@@ -23,7 +22,6 @@ define Device/marvell_armada7040-db
   DEVICE_TITLE := Marvell Armada 7040 DB board
   DEVICE_DTS := armada-7040-db
   IMAGE/sdcard.img.gz := boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
-  SUPPORTED_DEVICES := marvell,armada7040-db
 endef
 TARGET_DEVICES += marvell_armada7040-db
 

target/linux/mvebu/image/cortex-a9.mk

@@ -20,6 +20,7 @@ define Device/linksys_wrt1200ac
   $(call Device/linksys,WRT1200AC (Caiman))
   DEVICE_DTS := armada-385-linksys-caiman
   DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES := armada-385-linksys-caiman linksys,caiman
 endef
 TARGET_DEVICES += linksys_wrt1200ac
 
@@ -27,6 +28,7 @@ define Device/linksys_wrt1900acv2
   $(call Device/linksys,WRT1900ACv2 (Cobra))
   DEVICE_DTS := armada-385-linksys-cobra
   DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES := armada-385-linksys-cobra linksys,cobra
 endef
 TARGET_DEVICES += linksys_wrt1900acv2
 
@@ -34,6 +36,7 @@ define Device/linksys_wrt3200acm
   $(call Device/linksys,WRT3200ACM (Rango))
   DEVICE_DTS := armada-385-linksys-rango
   DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
+  SUPPORTED_DEVICES := armada-385-linksys-rango linksys,rango
 endef
 TARGET_DEVICES += linksys_wrt3200acm
 
@@ -41,6 +44,7 @@ define Device/linksys_wrt1900acs
   $(call Device/linksys,WRT1900ACS (Shelby))
   DEVICE_DTS := armada-385-linksys-shelby
   DEVICE_PACKAGES += mwlwifi-firmware-88w8864
+  SUPPORTED_DEVICES := armada-385-linksys-shelby linksys,shelby
 endef
 TARGET_DEVICES += linksys_wrt1900acs
 
@@ -50,6 +54,7 @@ define Device/linksys_wrt32x
   DEVICE_PACKAGES += kmod-btmrvl kmod-mwifiex-sdio mwlwifi-firmware-88w8964
   KERNEL_SIZE := 3072k
   KERNEL := kernel-bin | append-dtb
+  SUPPORTED_DEVICES := armada-385-linksys-venom linksys,venom
 endef
 TARGET_DEVICES += linksys_wrt32x
 
@@ -58,12 +63,13 @@ define Device/linksys_wrt1900ac
   DEVICE_DTS := armada-xp-linksys-mamba
   DEVICE_PACKAGES += mwlwifi-firmware-88w8864
   KERNEL_SIZE := 3072k
+  SUPPORTED_DEVICES := armada-xp-linksys-mamba linksys,mamba
 endef
 TARGET_DEVICES += linksys_wrt1900ac
 
 define Device/plathome_openblocks-ax3-4
   DEVICE_DTS := armada-xp-openblocks-ax3-4
-  SUPPORTED_DEVICES := openblocks-ax3-4
+  SUPPORTED_DEVICES += openblocks-ax3-4
   BLOCKSIZE := 128k
   PAGESIZE := 1
   IMAGES += factory.img
@@ -78,6 +84,7 @@ define Device/marvell_a385-db-ap
   IMAGES += factory.img
   KERNEL_SIZE := 8192k
   DEVICE_TITLE := Marvell Armada 385 DB AP (DB-88F6820-AP)
+  SUPPORTED_DEVICES += armada-385-db-ap
 endef
 TARGET_DEVICES += marvell_a385-db-ap
 
@@ -85,6 +92,7 @@ define Device/marvell_a370-db
   $(Device/NAND-512K)
   DEVICE_TITLE := Marvell Armada 370 DB (DB-88F6710-BP-DDR3)
   DEVICE_DTS := armada-370-db
+  SUPPORTED_DEVICES += armada-370-db
 endef
 TARGET_DEVICES += marvell_a370-db
 
@@ -92,6 +100,7 @@ define Device/marvell_a370-rd
   $(Device/NAND-512K)
   DEVICE_TITLE := Marvell Armada 370 RD (RD-88F6710-A1)
   DEVICE_DTS := armada-370-rd
+  SUPPORTED_DEVICES += armada-370-rd
 endef
 TARGET_DEVICES += marvell_a370-rd
 
@@ -99,6 +108,7 @@ define Device/marvell_axp-db
   $(Device/NAND-512K)
   DEVICE_TITLE := Marvell Armada XP DB (DB-78460-BP)
   DEVICE_DTS := armada-xp-db
+  SUPPORTED_DEVICES += armada-xp-db
 endef
 TARGET_DEVICES += marvell_axp-db
 
@@ -106,6 +116,7 @@ define Device/marvell_axp-gp
   $(Device/NAND-512K)
   DEVICE_TITLE := Marvell Armada XP GP (DB-MV784MP-GP)
   DEVICE_DTS := armada-xp-gp
+  SUPPORTED_DEVICES += armada-xp-gp
 endef
 TARGET_DEVICES += marvell_axp-gp
 
@@ -114,6 +125,7 @@ define Device/marvell_a388-rd
   DEVICE_DTS := armada-388-rd
   IMAGES := firmware.bin
   IMAGE/firmware.bin := append-kernel | pad-to 256k | append-rootfs | pad-rootfs
+  SUPPORTED_DEVICES := armada-388-rd marvell,a385-rd
 endef
 TARGET_DEVICES += marvell_a388-rd
 
@@ -125,7 +137,7 @@ define Device/solidrun_clearfog-pro-a1
   IMAGES := sdcard.img.gz
   IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
   DEVICE_DTS := armada-388-clearfog-pro armada-388-clearfog-base
-  SUPPORTED_DEVICES := armada-388-clearfog-pro armada-388-clearfog
+  SUPPORTED_DEVICES += armada-388-clearfog armada-388-clearfog-pro
   UBOOT := clearfog-u-boot-spl.kwb
   BOOT_SCRIPT := clearfog
 endef
@@ -139,6 +151,7 @@ define Device/solidrun_clearfog-base-a1
   IMAGES := sdcard.img.gz
   IMAGE/sdcard.img.gz := boot-scr | boot-img-ext4 | sdcard-img-ext4 | gzip | append-metadata
   DEVICE_DTS := armada-388-clearfog-base armada-388-clearfog-pro
+  SUPPORTED_DEVICES += armada-388-clearfog-base
   UBOOT := clearfog-u-boot-spl.kwb
   BOOT_SCRIPT := clearfog
 endef
@@ -147,7 +160,7 @@ TARGET_DEVICES += solidrun_clearfog-base-a1
 define Device/globalscale_mirabox
   $(Device/NAND-512K)
   DEVICE_DTS := armada-370-mirabox
-  SUPPORTED_DEVICES := mirabox
+  SUPPORTED_DEVICES += mirabox
   DEVICE_TITLE := Globalscale Mirabox
 endef
 TARGET_DEVICES += globalscale_mirabox
@@ -166,6 +179,7 @@ define Device/cznic_turris-omnia
   IMAGE/omnia-medkit-$$(IMAGE_PREFIX)-initramfs.tar.gz := omnia-medkit-initramfs | gzip
   IMAGE_NAME = $$(2)
   DEVICE_DTS := armada-385-turris-omnia
+  SUPPORTED_DEVICES += armada-385-turris-omnia
 endef
 TARGET_DEVICES += cznic_turris-omnia