add support for the Atheros AP113 reference board

This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935

target/linux/ar71xx/base-files/etc/uci-defaults/leds

@@ -106,7 +106,10 @@ alfa-nx)
 	set_led_netdev "lan" "LAN" "alfa:green:led_3" "eth1"
 	;;
 
-rb-750)
+ap113)
+	set_led_usbdev "usb" "USB" "ap113:green:usb" "1-1"
+	;;
+rb750)
 	set_led_default "act" "act" "rb750:green:act" "1"
 	set_led_netdev "port1" "port1" "rb750:green:port1" "eth1"
 	set_led_switch "port2" "port2" "rb750:green:port2" "switch0" "0x10"

target/linux/ar71xx/base-files/etc/uci-defaults/network

@@ -67,7 +67,8 @@ rb-493g)
 	;;
 
 wzr-hp-g300nh2 |\
-pb92)
+pb92 |\
+ap113)
 	ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
 	ucidef_add_switch "eth0" "1" "1"
 	ucidef_add_switch_vlan "eth0" "1" "0t 1 3 4 5"

target/linux/ar71xx/base-files/lib/ar71xx.sh

@@ -136,6 +136,9 @@ ar71xx_board_detect() {
 	*ALL0258N)
 		name="all0258n"
 		;;
+	*AP113)
+		name="ap113"
+		;;
 	*AP121)
 		name="ap121"
 		;;

target/linux/ar71xx/base-files/lib/upgrade/platform.sh

@@ -79,6 +79,7 @@ platform_check_image() {
 		;;
 	alfa-ap96 | \
 	alfa-nx | \
+	ap113 | \
 	ap121 | \
 	ap121-mini | \
 	ap96 | \

target/linux/ar71xx/config-2.6.39

@@ -16,6 +16,7 @@ CONFIG_AR71XX_DEV_USB=y
 CONFIG_AR71XX_MACH_ALFA_AP96=y
 CONFIG_AR71XX_MACH_ALFA_NX=y
 CONFIG_AR71XX_MACH_ALL0258N=y
+CONFIG_AR71XX_MACH_AP113=y
 CONFIG_AR71XX_MACH_AP121=y
 CONFIG_AR71XX_MACH_AP81=y
 CONFIG_AR71XX_MACH_AP83=y

target/linux/ar71xx/config-3.2

@@ -25,6 +25,7 @@ CONFIG_ATH79_DEV_WMAC=y
 CONFIG_ATH79_MACH_ALFA_AP96=y
 CONFIG_ATH79_MACH_ALFA_NX=y
 CONFIG_ATH79_MACH_ALL0258N=y
+CONFIG_ATH79_MACH_AP113=y
 CONFIG_ATH79_MACH_AP121=y
 CONFIG_ATH79_MACH_AP81=y
 CONFIG_ATH79_MACH_AP83=y

target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Kconfig

@@ -59,6 +59,15 @@ config AR71XX_MACH_AP96
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
 
+config AR71XX_MACH_AP113
+	bool "Atheros AP113 board support"
+	select SOC_AR724X
+	select AR71XX_DEV_M25P80
+	select AR71XX_DEV_PB9X_PCI if PCI
+	select AR71XX_DEV_GPIO_BUTTONS
+	select AR71XX_DEV_LEDS_GPIO
+	select AR71XX_DEV_USB
+
 config AR71XX_MACH_AP121
 	bool "Atheros AP121 board support"
 	select AR71XX_DEV_M25P80

target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/Makefile

@@ -31,6 +31,7 @@ obj-$(CONFIG_AR71XX_PCI_ATH9K_FIXUP)	+= pci-ath9k-fixup.o
 obj-$(CONFIG_AR71XX_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
 obj-$(CONFIG_AR71XX_MACH_ALFA_NX)	+= mach-alfa-nx.o
 obj-$(CONFIG_AR71XX_MACH_ALL0258N)	+= mach-all0258n.o
+obj-$(CONFIG_AR71XX_MACH_AP113)		+= mach-ap113.o
 obj-$(CONFIG_AR71XX_MACH_AP121)		+= mach-ap121.o
 obj-$(CONFIG_AR71XX_MACH_AP81)		+= mach-ap81.o
 obj-$(CONFIG_AR71XX_MACH_AP83)		+= mach-ap83.o

target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/mach-ap113.c

@@ -0,0 +1,129 @@
+/*
+ *  Atheros AP113 board support
+ *
+ *  Copyright (C) 2011 Florian Fainelli <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/flash.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-pb9x-pci.h"
+#include "dev-usb.h"
+
+#define AP113_GPIO_LED_USB		0
+#define AP113_GPIO_LED_STATUS		1
+#define AP113_GPIO_LED_ST		11
+
+#define AP113_GPIO_BTN_JUMPSTART	12
+
+#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
+
+#ifdef CONFIG_MTD_PARTITIONS
+static struct mtd_partition ap113_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= 0x010000,
+		.size		= 0x300000,
+	},
+	{
+		.name		= "uImage",
+		.offset		= 0x300000,
+		.size		= 0x3e0000,
+	},
+	{
+		.name		= "NVRAM",
+		.offset		= 0x3e0000,
+		.size		= 0x010000,
+	},
+	{
+		.name		= "ART",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+#define ap113_nr_parts		ARRAY_SIZE(ap113_parts)
+#else
+#define ap113_parts		NULL
+#define ap113_nr_parts		0
+#endif /* CONFIG_MTD_PARTITIONS */
+
+static struct flash_platform_data ap113_flash_data = {
+	.parts		= ap113_parts,
+	.nr_parts	= ap113_nr_parts,
+};
+
+static struct gpio_led ap113_leds_gpio[] __initdata = {
+	{
+		.name		= "ap113:green:usb",
+		.gpio		= AP113_GPIO_LED_USB,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap113:green:status",
+		.gpio		= AP113_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap113:green:st",
+		.gpio		= AP113_GPIO_LED_ST,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
+	{
+		.desc		= "jumpstart button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP113_GPIO_BTN_JUMPSTART,
+		.active_low	= 1,
+	},
+};
+
+static void __init ap113_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ar71xx_add_device_m25p80(&ap113_flash_data);
+
+	ar71xx_add_device_mdio(0, ~BIT(0));
+	ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, 0);
+	ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ar71xx_eth0_data.speed = SPEED_1000;
+	ar71xx_eth0_data.duplex = DUPLEX_FULL;
+	ar71xx_eth0_data.phy_mask = BIT(0);
+
+	ar71xx_add_device_eth(0);
+
+	ar71xx_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(ap113_gpio_keys),
+					 ap113_gpio_keys);
+	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
+					ap113_leds_gpio);
+
+	ar71xx_add_device_usb();
+
+	pb9x_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_AP113, "AP113", "Atheros AP113",
+	     ap113_setup);

target/linux/ar71xx/files-2.6.39/arch/mips/ar71xx/machtype.h

@@ -19,6 +19,7 @@ enum ar71xx_mach_type {
 	AR71XX_MACH_ALFA_AP96,	/* ALFA Network AP96 board */
 	AR71XX_MACH_ALFA_NX,	/* ALFA Network N2/N5 board */
 	AR71XX_MACH_ALL0258N,	/* Allnet ALL0258N */
+	AR71XX_MACH_AP113,	/* Atheros AP113 */
 	AR71XX_MACH_AP121,	/* Atheros AP121 */
 	AR71XX_MACH_AP121_MINI,	/* Atheros AP121-MINI */
 	AR71XX_MACH_AP81,	/* Atheros AP81 */

target/linux/ar71xx/files-3.2/arch/mips/ath79/mach-ap113.c

@@ -0,0 +1,124 @@
+/*
+ *  Atheros AP113 board support
+ *
+ *  Copyright (C) 2011 Florian Fainelli <[email protected]>
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/partitions.h>
+#include <linux/spi/flash.h>
+
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "pci.h"
+#include "dev-usb.h"
+#include "machtypes.h"
+
+#define AP113_GPIO_LED_USB		0
+#define AP113_GPIO_LED_STATUS		1
+#define AP113_GPIO_LED_ST		11
+
+#define AP113_GPIO_BTN_JUMPSTART	12
+
+#define AP113_KEYS_POLL_INTERVAL	20	/* msecs */
+#define AP113_KEYS_DEBOUNCE_INTERVAL	(3 * AP113_KEYS_POLL_INTERVAL)
+
+static struct mtd_partition ap113_parts[] = {
+	{
+		.name		= "u-boot",
+		.offset		= 0,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+	{
+		.name		= "rootfs",
+		.offset		= 0x010000,
+		.size		= 0x300000,
+	},
+	{
+		.name		= "uImage",
+		.offset		= 0x300000,
+		.size		= 0x3e0000,
+	},
+	{
+		.name		= "NVRAM",
+		.offset		= 0x3e0000,
+		.size		= 0x010000,
+	},
+	{
+		.name		= "ART",
+		.offset		= 0x3f0000,
+		.size		= 0x010000,
+		.mask_flags	= MTD_WRITEABLE,
+	},
+};
+#define ap113_nr_parts		ARRAY_SIZE(ap113_parts)
+
+static struct flash_platform_data ap113_flash_data = {
+	.parts		= ap113_parts,
+	.nr_parts	= ap113_nr_parts,
+};
+
+static struct gpio_led ap113_leds_gpio[] __initdata = {
+	{
+		.name		= "ap113:green:usb",
+		.gpio		= AP113_GPIO_LED_USB,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap113:green:status",
+		.gpio		= AP113_GPIO_LED_STATUS,
+		.active_low	= 1,
+	},
+	{
+		.name		= "ap113:green:st",
+		.gpio		= AP113_GPIO_LED_ST,
+		.active_low	= 1,
+	}
+};
+
+static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
+	{
+		.desc		= "jumpstart button",
+		.type		= EV_KEY,
+		.code		= KEY_WPS_BUTTON,
+		.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
+		.gpio		= AP113_GPIO_BTN_JUMPSTART,
+		.active_low	= 1,
+	},
+};
+
+static void __init ap113_setup(void)
+{
+	u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
+
+	ath79_register_m25p80(&ap113_flash_data);
+
+	ath79_register_mdio(0, ~BIT(0));
+	ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
+	ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+	ath79_eth0_data.speed = SPEED_1000;
+	ath79_eth0_data.duplex = DUPLEX_FULL;
+	ath79_eth0_data.phy_mask = BIT(0);
+
+	ath79_register_eth(0);
+
+	ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
+					 ARRAY_SIZE(ap113_gpio_keys),
+					 ap113_gpio_keys);
+	ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
+					ap113_leds_gpio);
+
+	ath79_register_pci();
+
+	ath79_register_usb();
+}
+
+MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
+	     ap113_setup);

target/linux/ar71xx/generic/profiles/atheros.mk

@@ -5,6 +5,17 @@
 # See /LICENSE for more information.
 #
 
+define Profile/AP113
+	NAME:=Atheros AP113 reference board
+	PACKAGES:=kmod-usb-core kmod-usb2
+endef
+
+define Profile/AP113/description
+	Package set optimized for the Atheros AP113 reference board.
+endef
+
+$(eval $(call Profile,AP113))
+
 define Profile/AP121
 	NAME:=Atheros AP121 reference board
 	PACKAGES:=kmod-usb-core kmod-usb2

target/linux/ar71xx/image/Makefile

@@ -626,6 +626,12 @@ define Image/Build/Profile/ALFAAP96
 	$(call Image/Build/Template/$(fs_128k)/$(1),AthLzma,alfa-ap96,$(alfa_ap96_cmdline),alfa_ap96_mtdlayout,2097152,13631488,RKuImage)
 endef
 
+ap113_mtd_layout=64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware)
+ap113_cmdline=board=AP113 console=ttyS0,115200
+define Image/Build/Profile/AP113
+	$(call Image/Build/Template/$(fs_64k)/$(1),AthLzma,ap113,$(ap113_cmdline),ap113_mtd_layout,917504,3080192,RK)
+endef
+
 ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware)
 ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware)
 
@@ -977,6 +983,7 @@ define Image/Build/Profile/Default
 	$(call Image/Build/Profile/ALFAAP96,$(1))
 	$(call Image/Build/Profile/ALFANX,$(1))
 	$(call Image/Build/Profile/ALL0258N,$(1))
+	$(call Image/Build/Profile/AP113,$(1))
 	$(call Image/Build/Profile/AP121,$(1))
 	$(call Image/Build/Profile/AP121MINI,$(1))
 	$(call Image/Build/Profile/AP81,$(1))

target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch

@@ -1,12 +1,13 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,78 @@
+@@ -16,17 +16,79 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
 +	ATH79_MACH_ALFA_AP96,		/* ALFA Network AP96 board */
 +	ATH79_MACH_ALFA_NX,		/* ALFA Network N2/N5 board */
 +	ATH79_MACH_ALL0258N,		/* Allnet ALL0258N */
++	ATH79_MACH_AP113,		/* Atheros AP113 reference board */
  	ATH79_MACH_AP121,		/* Atheros AP121 reference board */
  	ATH79_MACH_AP121_MINI,		/* Atheros AP121-MINI reference board */
  	ATH79_MACH_AP81,		/* Atheros AP81 reference board */
@@ -81,7 +82,7 @@
  #endif /* _ATH79_MACHTYPE_H */
 --- a/arch/mips/ath79/Kconfig
 +++ b/arch/mips/ath79/Kconfig
-@@ -2,6 +2,42 @@ if ATH79
+@@ -2,6 +2,52 @@ if ATH79
  
  menu "Atheros AR71XX/AR724X/AR913X machine selection"
  
@@ -120,11 +121,21 @@
 +	select ATH79_DEV_GPIO_BUTTONS
 +	select ATH79_DEV_LEDS_GPIO
 +	select ATH79_DEV_M25P80
++
++config ATH79_MACH_AP113
++	bool "Atheros AP113 board support"
++	select SOC_AR724X
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_PB9X_PCI if PCI
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_USB
++	select ATH79_DEV_ETH
 +
  config ATH79_MACH_AP121
  	bool "Atheros AP121 reference board"
  	select SOC_AR933X
-@@ -28,6 +64,36 @@ config ATH79_MACH_AP81
+@@ -28,6 +74,36 @@ config ATH79_MACH_AP81
  	  Say 'Y' here if you want your kernel to support the
  	  Atheros AP81 reference board.
  
@@ -161,7 +172,7 @@
  config ATH79_MACH_DB120
  	bool "Atheros DB120 reference board"
  	select SOC_AR934X
-@@ -42,6 +108,13 @@ config ATH79_MACH_DB120
+@@ -42,6 +118,13 @@ config ATH79_MACH_DB120
  	  Say 'Y' here if you want your kernel to support the
  	  Atheros DB120 reference board.
  
@@ -175,7 +186,7 @@
  config ATH79_MACH_PB44
  	bool "Atheros PB44 reference board"
  	select SOC_AR71XX
-@@ -54,6 +127,359 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,359 @@ config ATH79_MACH_PB44
  	  Say 'Y' here if you want your kernel to support the
  	  Atheros PB44 reference board.
  
@@ -535,7 +546,7 @@
  config ATH79_MACH_UBNT_XM
  	bool "Ubiquiti Networks XM (rev 1.0) board"
  	select SOC_AR724X
-@@ -67,6 +483,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +503,24 @@ config ATH79_MACH_UBNT_XM
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -560,7 +571,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -96,10 +530,6 @@ config SOC_AR934X
+@@ -96,10 +550,6 @@ config SOC_AR934X
  	select PCI_AR724X if PCI
  	def_bool n
  
@@ -571,7 +582,7 @@
  config ATH79_DEV_AP9X_PCI
  	select ATH79_PCI_ATH9K_FIXUP
  	def_bool n
-@@ -110,7 +540,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +560,14 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -587,7 +598,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +572,7 @@ config ATH79_NVRAM
+@@ -135,4 +592,7 @@ config ATH79_NVRAM
  config ATH79_PCI_ATH9K_FIXUP
  	def_bool n
  
@@ -597,13 +608,14 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,54 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= p
+@@ -36,8 +36,55 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= p
  #
  # Machines
  #
 +obj-$(CONFIG_ATH79_MACH_ALFA_AP96)	+= mach-alfa-ap96.o
 +obj-$(CONFIG_ATH79_MACH_ALFA_NX)	+= mach-alfa-nx.o
 +obj-$(CONFIG_ATH79_MACH_ALL0258N)	+= mach-all0258n.o
++obj-$(CONFIG_ATH79_MACH_AP113)		+= mach-ap113.o
  obj-$(CONFIG_ATH79_MACH_AP121)		+= mach-ap121.o
  obj-$(CONFIG_ATH79_MACH_AP81)		+= mach-ap81.o
 +obj-$(CONFIG_ATH79_MACH_AP83)		+= mach-ap83.o