ar71xx: merge dev-ar9{13,34}x-wmac into dev-ar9xxx-wmac

SVN-Revision: 26595

target/linux/ar71xx/config-2.6.37

@@ -4,8 +4,7 @@ CONFIG_AG71XX_AR8216_SUPPORT=y
 # CONFIG_AG71XX_DEBUG_FS is not set
 CONFIG_AR71XX_DEV_AP91_PCI=y
 CONFIG_AR71XX_DEV_AP94_PCI=y
-CONFIG_AR71XX_DEV_AR913X_WMAC=y
-CONFIG_AR71XX_DEV_AR934X_WMAC=y
+CONFIG_AR71XX_DEV_AR9XXX_WMAC=y
 CONFIG_AR71XX_DEV_DB120_PCI=y
 CONFIG_AR71XX_DEV_DSA=y
 CONFIG_AR71XX_DEV_GPIO_BUTTONS=y

target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig

@@ -5,7 +5,7 @@ menu "Atheros AR71xx machine selection"
 config AR71XX_MACH_AP81
 	bool "Atheros AP81 board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -13,7 +13,7 @@ config AR71XX_MACH_AP81
 
 config AR71XX_MACH_AP83
 	bool "Atheros AP83 board support"
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -30,7 +30,7 @@ config AR71XX_MACH_AP96
 
 config AR71XX_MACH_DB120
 	bool "Atheros DB120 board support"
-	select AR71XX_DEV_AR934X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_DB120_PCI if PCI
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
@@ -49,7 +49,7 @@ config AR71XX_MACH_DIR_600_A1
 config AR71XX_MACH_DIR_615_C1
 	bool "D-Link DIR-615 rev. C1 support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_NVRAM
@@ -114,7 +114,7 @@ config AR71XX_MACH_AW_NR580
 
 config AR71XX_MACH_WZR_HP_G300NH
 	bool "Buffalo WZR-HP-G300NH board support"
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -133,7 +133,7 @@ config AR71XX_MACH_WP543
 config AR71XX_MACH_WRT160NL
 	bool "Linksys WRT160NL board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -171,7 +171,7 @@ config AR71XX_MACH_WNDR3700
 config AR71XX_MACH_WNR2000
 	bool "NETGEAR WNR2000 board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	default n
@@ -179,7 +179,7 @@ config AR71XX_MACH_WNR2000
 config AR71XX_MACH_MZK_W04NU
 	bool "Planex MZK-W04NU board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -188,7 +188,7 @@ config AR71XX_MACH_MZK_W04NU
 config AR71XX_MACH_MZK_W300NH
 	bool "Planex MZK-W300NH board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	default n
@@ -196,7 +196,7 @@ config AR71XX_MACH_MZK_W300NH
 config AR71XX_MACH_NBG460N
 	bool "Zyxel NBG460N/550N/550NH board support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	default n
@@ -221,7 +221,7 @@ config AR71XX_MACH_TL_WA901ND
 config AR71XX_MACH_TL_WA901ND_V2
 	bool "TP-LINK TL-WA901ND v2 support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	default n
@@ -246,7 +246,7 @@ config AR71XX_MACH_TL_WR841N_V1
 config AR71XX_MACH_TL_WR941ND
 	bool "TP-LINK TL-WR941ND support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_DSA
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
@@ -255,7 +255,7 @@ config AR71XX_MACH_TL_WR941ND
 config AR71XX_MACH_TL_WR1043ND
 	bool "TP-LINK TL-WR1043ND support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_DEV_USB
@@ -264,7 +264,7 @@ config AR71XX_MACH_TL_WR1043ND
 config AR71XX_MACH_TEW_632BRP
 	bool "TRENDnet TEW-632BRP support"
 	select AR71XX_DEV_M25P80
-	select AR71XX_DEV_AR913X_WMAC
+	select AR71XX_DEV_AR9XXX_WMAC
 	select AR71XX_DEV_GPIO_BUTTONS
 	select AR71XX_DEV_LEDS_GPIO
 	select AR71XX_NVRAM
@@ -308,10 +308,7 @@ config AR71XX_DEV_AP94_PCI
 	select AR71XX_PCI_ATH9K_FIXUP
 	def_bool n
 
-config AR71XX_DEV_AR913X_WMAC
-	def_bool n
-
-config AR71XX_DEV_AR934X_WMAC
+config AR71XX_DEV_AR9XXX_WMAC
 	def_bool n
 
 config AR71XX_DEV_DB120_PCI

target/linux/ar71xx/files/arch/mips/ar71xx/Makefile

@@ -15,8 +15,7 @@ obj-$(CONFIG_PCI)			+= pci.o
 
 obj-$(CONFIG_AR71XX_DEV_AP91_PCI)	+= dev-ap91-pci.o
 obj-$(CONFIG_AR71XX_DEV_AP94_PCI)	+= dev-ap94-pci.o
-obj-$(CONFIG_AR71XX_DEV_AR913X_WMAC)	+= dev-ar913x-wmac.o
-obj-$(CONFIG_AR71XX_DEV_AR934X_WMAC)	+= dev-ar934x-wmac.o
+obj-$(CONFIG_AR71XX_DEV_AR9XXX_WMAC)	+= dev-ar9xxx-wmac.o
 obj-$(CONFIG_AR71XX_DEV_DB120_PCI)	+= dev-db120-pci.o
 obj-$(CONFIG_AR71XX_DEV_DSA)		+= dev-dsa.o
 obj-$(CONFIG_AR71XX_DEV_GPIO_BUTTONS)	+= dev-gpio-buttons.o

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar913x-wmac.c

@@ -1,70 +0,0 @@
-/*
- *  Atheros AR913x SoC built-in WMAC device support
- *
- *  Copyright (C) 2008-2009 Gabor Juhos <[email protected]>
- *  Copyright (C) 2008 Imre Kaloz <[email protected]>
- *
- *  Parts of this file are based on Atheros' 2.6.15 BSP
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "dev-ar913x-wmac.h"
-
-static struct ath9k_platform_data ar913x_wmac_data = {
-	.led_pin = -1,
-};
-static char ar913x_wmac_mac[6];
-
-static struct resource ar913x_wmac_resources[] = {
-	{
-		.start	= AR91XX_WMAC_BASE,
-		.end	= AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= AR71XX_CPU_IRQ_IP2,
-		.end	= AR71XX_CPU_IRQ_IP2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ar913x_wmac_device = {
-	.name		= "ath9k",
-	.id		= -1,
-	.resource	= ar913x_wmac_resources,
-	.num_resources	= ARRAY_SIZE(ar913x_wmac_resources),
-	.dev = {
-		.platform_data = &ar913x_wmac_data,
-	},
-};
-
-void __init ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr)
-{
-	if (cal_data)
-		memcpy(ar913x_wmac_data.eeprom_data, cal_data,
-		       sizeof(ar913x_wmac_data.eeprom_data));
-
-	if (mac_addr) {
-		memcpy(ar913x_wmac_mac, mac_addr, sizeof(ar913x_wmac_mac));
-		ar913x_wmac_data.macaddr = ar913x_wmac_mac;
-	}
-
-	ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
-	mdelay(10);
-
-	ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
-	mdelay(10);
-
-	platform_device_register(&ar913x_wmac_device);
-}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar913x-wmac.h

@@ -1,19 +0,0 @@
-/*
- *  Atheros AR913x SoC built-in WMAC device support
- *
- *  Copyright (C) 2008-2009 Gabor Juhos <[email protected]>
- *  Copyright (C) 2008 Imre Kaloz <[email protected]>
- *
- *  Parts of this file are based on Atheros' 2.6.15 BSP
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _AR71XX_DEV_AR913X_WMAC_H
-#define _AR71XX_DEV_AR913X_WMAC_H
-
-void ar913x_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init;
-
-#endif /* _AR71XX_DEV_AR913X_WMAC_H */

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar934x-wmac.c

@@ -1,64 +0,0 @@
-/*
- *  Atheros AR934x SoC built-in WMAC device support
- *
- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
- *
- *  Parts of this file are based on Atheros 2.6.31 BSP
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/etherdevice.h>
-#include <linux/platform_device.h>
-#include <linux/ath9k_platform.h>
-
-#include <asm/mach-ar71xx/ar71xx.h>
-
-#include "dev-ar934x-wmac.h"
-
-static struct ath9k_platform_data ar934x_wmac_data = {
-	.led_pin = -1,
-};
-
-static u8 ar934x_wmac_mac[6];
-
-static struct resource ar934x_wmac_resources[] = {
-	{
-		.start	= AR934X_WMAC_BASE,
-		.end	= AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1,
-		.flags	= IORESOURCE_MEM,
-	}, {
-		.start	= AR71XX_CPU_IRQ_IP2,
-		.end	= AR71XX_CPU_IRQ_IP2,
-		.flags	= IORESOURCE_IRQ,
-	},
-};
-
-static struct platform_device ar934x_wmac_device = {
-	.name		= "ath9k",
-	.id		= -1,
-	.resource	= ar934x_wmac_resources,
-	.num_resources	= ARRAY_SIZE(ar934x_wmac_resources),
-	.dev = {
-		.platform_data = &ar934x_wmac_data,
-	},
-};
-
-void __init ar934x_add_device_wmac(u8 *cal_data, u8 *mac_addr)
-{
-	if (cal_data)
-		memcpy(ar934x_wmac_data.eeprom_data, cal_data,
-		       sizeof(ar934x_wmac_data.eeprom_data));
-
-	if (mac_addr) {
-		memcpy(ar934x_wmac_mac, mac_addr, sizeof(ar934x_wmac_mac));
-		ar934x_wmac_data.macaddr = ar934x_wmac_mac;
-	}
-
-	platform_device_register(&ar934x_wmac_device);
-}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar934x-wmac.h

@@ -1,18 +0,0 @@
-/*
- *  Atheros AR934x SoC built-in WMAC device support
- *
- *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
- *
- *  Parts of this file are based on Atheros linux 2.6.31 BSP
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- */
-
-#ifndef _AR71XX_DEV_AR934X_WMAC_H
-#define _AR71XX_DEV_AR934X_WMAC_H
-
-void ar934x_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init;
-
-#endif /* _AR71XX_DEV_AR934X_WMAC_H */

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar9xxx-wmac.c

@@ -0,0 +1,98 @@
+/*
+ *  Atheros AR9XXX SoCs built-in WMAC device support
+ *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
+ *  Copyright (C) 2008-2009 Gabor Juhos <[email protected]>
+ *  Copyright (C) 2008 Imre Kaloz <[email protected]>
+ *
+ *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/etherdevice.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+
+#include <asm/mach-ar71xx/ar71xx.h>
+
+#include "dev-ar9xxx-wmac.h"
+
+static struct ath9k_platform_data ar9xxx_wmac_data = {
+	.led_pin = -1,
+};
+static char ar9xxx_wmac_mac[6];
+
+static struct resource ar9xxx_wmac_resources[] = {
+	{
+		/* .start and .end fields are filled dynamically */
+		.flags	= IORESOURCE_MEM,
+	}, {
+		.start	= AR71XX_CPU_IRQ_IP2,
+		.end	= AR71XX_CPU_IRQ_IP2,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device ar9xxx_wmac_device = {
+	.name		= "ath9k",
+	.id		= -1,
+	.resource	= ar9xxx_wmac_resources,
+	.num_resources	= ARRAY_SIZE(ar9xxx_wmac_resources),
+	.dev = {
+		.platform_data = &ar9xxx_wmac_data,
+	},
+};
+
+static void ar913x_wmac_init(void)
+{
+	ar71xx_device_stop(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	ar71xx_device_start(RESET_MODULE_AMBA2WMAC);
+	mdelay(10);
+
+	ar9xxx_wmac_resources[0].start = AR91XX_WMAC_BASE;
+	ar9xxx_wmac_resources[0].end = AR91XX_WMAC_BASE + AR91XX_WMAC_SIZE - 1;
+}
+
+static void ar934x_wmac_init(void)
+{
+	ar9xxx_wmac_resources[0].start = AR934X_WMAC_BASE;
+	ar9xxx_wmac_resources[0].end = AR934X_WMAC_BASE + AR934X_WMAC_SIZE - 1;
+}
+
+void __init ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr)
+{
+	switch (ar71xx_soc) {
+	case AR71XX_SOC_AR9130:
+	case AR71XX_SOC_AR9132:
+		ar913x_wmac_init();
+		break;
+
+	case AR71XX_SOC_AR9341:
+	case AR71XX_SOC_AR9342:
+	case AR71XX_SOC_AR9344:
+		ar934x_wmac_init();
+		break;
+
+	default:
+		BUG();
+	}
+
+	if (cal_data)
+		memcpy(ar9xxx_wmac_data.eeprom_data, cal_data,
+		       sizeof(ar9xxx_wmac_data.eeprom_data));
+
+	if (mac_addr) {
+		memcpy(ar9xxx_wmac_mac, mac_addr, sizeof(ar9xxx_wmac_mac));
+		ar9xxx_wmac_data.macaddr = ar9xxx_wmac_mac;
+	}
+
+	platform_device_register(&ar9xxx_wmac_device);
+}

target/linux/ar71xx/files/arch/mips/ar71xx/dev-ar9xxx-wmac.h

@@ -0,0 +1,20 @@
+/*
+ *  Atheros AR9XXX SoCs built-in WMAC device support
+ *
+ *  Copyright (C) 2010-2011 Jaiganesh Narayanan <[email protected]>
+ *  Copyright (C) 2008-2009 Gabor Juhos <[email protected]>
+ *  Copyright (C) 2008 Imre Kaloz <[email protected]>
+ *
+ *  Parts of this file are based on Atheros 2.6.15/2.6.31 BSP
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#ifndef _AR71XX_DEV_AR9XXX_WMAC_H
+#define _AR71XX_DEV_AR9XXX_WMAC_H
+
+void ar9xxx_add_device_wmac(u8 *cal_data, u8 *mac_addr) __init;
+
+#endif /* _AR71XX_DEV_AR9XXX_WMAC_H */

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap81.c

@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -135,7 +135,7 @@ static void __init ap81_setup(void)
 					ARRAY_SIZE(ap81_gpio_buttons),
 					ap81_gpio_buttons);
 
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 }
 
 MIPS_MACHINE(AR71XX_MACH_AP81, "AP81", "Atheros AP81", ap81_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap83.c

@@ -22,7 +22,7 @@
 
 #include "machtype.h"
 #include "devices.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -222,7 +222,7 @@ static void __init ap83_generic_setup(void)
 
 	ar71xx_add_device_usb();
 
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 
 	platform_device_register(&ap83_flash_device);
 

target/linux/ar71xx/files/arch/mips/ar71xx/mach-db120.c

@@ -19,7 +19,7 @@
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
-#include "dev-ar934x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-db120-pci.h"
 
 #define DB120_GPIO_LED_USB	11
@@ -124,7 +124,7 @@ static void __init db120_setup(void)
 					ARRAY_SIZE(db120_gpio_buttons),
 					db120_gpio_buttons);
 
-	ar934x_add_device_wmac(art + DB120_CALDATA_OFFSET,
+	ar9xxx_add_device_wmac(art + DB120_CALDATA_OFFSET,
 				art + DB120_WMAC_MAC_OFFSET);
 
 	db120_pci_init();

target/linux/ar71xx/files/arch/mips/ar71xx/mach-dir-615-c1.c

@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "nvram.h"
@@ -167,7 +167,7 @@ static void __init dir_615c1_setup(void)
 					ARRAY_SIZE(dir_615c1_gpio_buttons),
 					dir_615c1_gpio_buttons);
 
-	ar913x_add_device_wmac(eeprom, wlan_mac);
+	ar9xxx_add_device_wmac(eeprom, wlan_mac);
 }
 
 MIPS_MACHINE(AR71XX_MACH_DIR_615_C1, "DIR-615-C1", "D-Link DIR-615 rev. C1",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w04nu.c

@@ -15,7 +15,7 @@
 
 #include "machtype.h"
 #include "devices.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-m25p80.h"
@@ -158,7 +158,7 @@ static void __init mzk_w04nu_setup(void)
 					mzk_w04nu_gpio_buttons);
 	ar71xx_add_device_usb();
 
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 }
 
 MIPS_MACHINE(AR71XX_MACH_MZK_W04NU, "MZK-W04NU", "Planex MZK-W04NU",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-mzk-w300nh.c

@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
@@ -151,7 +151,7 @@ static void __init mzk_w300nh_setup(void)
 	ar71xx_add_device_gpio_buttons(-1, MZK_W04NU_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(mzk_w300nh_gpio_buttons),
 					mzk_w300nh_gpio_buttons);
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 }
 
 MIPS_MACHINE(AR71XX_MACH_MZK_W300NH, "MZK-W300NH", "Planex MZK-W300NH",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-nbg460n.c

@@ -25,7 +25,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
@@ -206,7 +206,7 @@ static void __init nbg460n_setup(void)
 	/* register flash */
 	ar71xx_add_device_m25p80(&nbg460n_flash_data);
 
-	ar913x_add_device_wmac(eeprom, mac);
+	ar9xxx_add_device_wmac(eeprom, mac);
 
 	/* register RTC chip */
 	nbg460n_i2c_init();

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tew-632brp.c

@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "nvram.h"
@@ -143,7 +143,7 @@ static void __init tew_632brp_setup(void)
 					ARRAY_SIZE(tew_632brp_gpio_buttons),
 					tew_632brp_gpio_buttons);
 
-	ar913x_add_device_wmac(eeprom, wlan_mac);
+	ar9xxx_add_device_wmac(eeprom, wlan_mac);
 }
 
 MIPS_MACHINE(AR71XX_MACH_TEW_632BRP, "TEW-632BRP", "TRENDnet TEW-632BRP",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wa901nd-v2.c

@@ -20,7 +20,7 @@
 #include "dev-m25p80.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 
 #define TL_WA901ND_V2_GPIO_LED_QSS		4
 #define TL_WA901ND_V2_GPIO_LED_SYSTEM		2
@@ -124,7 +124,7 @@ static void __init tl_wa901nd_v2_setup(void)
 					ARRAY_SIZE(tl_wa901nd_v2_gpio_buttons),
 					tl_wa901nd_v2_gpio_buttons);
 
-        ar913x_add_device_wmac(eeprom, mac);
+        ar9xxx_add_device_wmac(eeprom, mac);
 }
 
 MIPS_MACHINE(AR71XX_MACH_TL_WA901ND_V2, "TL-WA901ND-v2",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr1043nd.c

@@ -17,7 +17,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -148,7 +148,7 @@ static void __init tl_wr1043nd_setup(void)
 					ARRAY_SIZE(tl_wr1043nd_gpio_buttons),
 					tl_wr1043nd_gpio_buttons);
 
-	ar913x_add_device_wmac(eeprom, mac);
+	ar9xxx_add_device_wmac(eeprom, mac);
 }
 
 MIPS_MACHINE(AR71XX_MACH_TL_WR1043ND, "TL-WR1043ND", "TP-LINK TL-WR1043ND",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr941nd.c

@@ -17,7 +17,7 @@
 #include "devices.h"
 #include "dev-dsa.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
@@ -139,7 +139,7 @@ static void __init tl_wr941nd_setup(void)
 	ar71xx_add_device_gpio_buttons(-1, TL_WR941ND_BUTTONS_POLL_INTERVAL,
 					ARRAY_SIZE(tl_wr941nd_gpio_buttons),
 					tl_wr941nd_gpio_buttons);
-	ar913x_add_device_wmac(eeprom, mac);
+	ar9xxx_add_device_wmac(eeprom, mac);
 }
 
 MIPS_MACHINE(AR71XX_MACH_TL_WR941ND, "TL-WR941ND", "TP-LINK TL-WR941ND",

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wnr2000.c

@@ -18,7 +18,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 
@@ -143,7 +143,7 @@ static void __init wnr2000_setup(void)
 					wnr2000_gpio_buttons);
 
 
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 }
 
 MIPS_MACHINE(AR71XX_MACH_WNR2000, "WNR2000", "NETGEAR WNR2000", wnr2000_setup);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wrt160nl.c

@@ -16,7 +16,7 @@
 #include "machtype.h"
 #include "devices.h"
 #include "dev-m25p80.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -143,9 +143,9 @@ static void __init wrt160nl_setup(void)
 
 	if (nvram_parse_mac_addr(nvram, WRT160NL_NVRAM_SIZE,
 				 "wl0_hwaddr=", mac) == 0)
-		ar913x_add_device_wmac(eeprom, mac);
+		ar9xxx_add_device_wmac(eeprom, mac);
 	else
-		ar913x_add_device_wmac(eeprom, NULL);
+		ar9xxx_add_device_wmac(eeprom, NULL);
 
 	ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(wrt160nl_leds_gpio),
 					wrt160nl_leds_gpio);

target/linux/ar71xx/files/arch/mips/ar71xx/mach-wzr-hp-g300nh.c

@@ -20,7 +20,7 @@
 
 #include "machtype.h"
 #include "devices.h"
-#include "dev-ar913x-wmac.h"
+#include "dev-ar9xxx-wmac.h"
 #include "dev-gpio-buttons.h"
 #include "dev-leds-gpio.h"
 #include "dev-usb.h"
@@ -247,7 +247,7 @@ static void __init wzrhpg300nh_setup(void)
 	ar71xx_add_device_eth(1);
 
 	ar71xx_add_device_usb();
-	ar913x_add_device_wmac(eeprom, NULL);
+	ar9xxx_add_device_wmac(eeprom, NULL);
 
 	platform_device_register(&wzrhpg300nh_74hc153_device);
 	platform_device_register(&wzrhpg300nh_flash_device);