uboot-mediatek: add 'rootwait' to bootargs where needed

Probing of the fitblk driver in some situations happens after Linux
attempts to mount rootfs, which then fails.
Always use 'rootwait' kernel parameter when using fitblk for rootfs.

Signed-off-by: Daniel Golle <[email protected]>

package/boot/uboot-mediatek/patches/404-add-bananapi_bpi-r64_defconfigs.patch

@@ -171,7 +171,7 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x48000000
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 +bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
 +bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
@@ -411,7 +411,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x48000000
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
 +bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1
 +bootconf_sata=config-1#mt7622-bananapi-bpi-r64-sata
@@ -617,7 +617,7 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x48000000
-+bootargs=ubi.block=0,fit root=/dev/fit0
++bootargs=ubi.block=0,fit root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 +bootconf=config-1#mt7622-bananapi-bpi-r64-pcie1
 +bootconf_pcie=config-1#mt7622-bananapi-bpi-r64-pcie1

package/boot/uboot-mediatek/patches/430-add-bpi-r3.patch

@@ -802,7 +802,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3
 +bootconf_base=config-mt7986a-bananapi-bpi-r3
@@ -886,7 +886,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_nor ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3
 +bootconf_base=config-mt7986a-bananapi-bpi-r3
@@ -949,7 +949,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootconf=config-mt7986a-bananapi-bpi-r3
 +bootconf_base=config-mt7986a-bananapi-bpi-r3
 +bootconf_nor=mt7986a-bananapi-bpi-r3-nor
@@ -1025,7 +1025,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3
 +bootconf_base=config-mt7986a-bananapi-bpi-r3

package/boot/uboot-mediatek/patches/442-add-bpi-r3-mini.patch

@@ -417,7 +417,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=ubi.block=0,fit root=/dev/fit0
++bootargs=root=ubi.block=0,fit root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3-mini
 +bootdelay=0
@@ -481,7 +481,7 @@
 +serverip=192.168.1.254
 +loadaddr=0x46000000
 +console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0
-+bootargs=root=/dev/fit0
++bootargs=root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootconf=config-mt7986a-bananapi-bpi-r3-mini
 +bootdelay=0

package/boot/uboot-mediatek/patches/450-add-bpi-r4.patch

@@ -555,7 +555,7 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x50000000
-+bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_sdmmc ; fi
 +bootconf=config-mt7988a-bananapi-bpi-r4
 +bootconf_sd=mt7988a-bananapi-bpi-r4-sd
@@ -624,7 +624,7 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x50000000
-+bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 ubi.block=0,fit
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait ubi.block=0,fit
 +bootconf=config-mt7988a-bananapi-bpi-r4
 +bootconf_extra=mt7988a-bananapi-bpi-r4-emmc
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi
@@ -694,7 +694,7 @@
 +ipaddr=192.168.1.1
 +serverip=192.168.1.254
 +loadaddr=0x50000000
-+bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0
++bootargs=console=ttyS0,115200n1 pci=pcie_bus_perf root=/dev/fit0 rootwait
 +bootcmd=if pstore check ; then run boot_recovery ; else run boot_emmc ; fi
 +bootconf=config-mt7988a-bananapi-bpi-r4
 +bootconf_base=config-mt7988a-bananapi-bpi-r4