Add package pwm-gpio-custom

SVN-Revision: 22350

package/pwm-gpio-custom/Makefile

@@ -0,0 +1,54 @@
+#
+# Copyright (C) 2010 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=pwm-gpio-custom
+PKG_RELEASE:=1
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/pwm-gpio-custom
+  SUBMENU:=Other modules
+  TITLE:=Custom GPIO-based PWM device
+  DEPENDS:=+kmod-pwm-gpio
+  FILES:=$(PKG_BUILD_DIR)/pwm-gpio-custom.ko
+  KCONFIG:=
+endef
+
+define KernelPackage/pwm-gpio-custom/description
+ Kernel module to register a custom pwm-gpio platform device.
+endef
+
+EXTRA_KCONFIG:= \
+	CONFIG_PWM_GPIO_CUSTOM=m
+
+EXTRA_CFLAGS:= \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=m,%,$(filter %=m,$(EXTRA_KCONFIG)))) \
+	$(patsubst CONFIG_%, -DCONFIG_%=1, $(patsubst %=y,%,$(filter %=y,$(EXTRA_KCONFIG))))
+
+MAKE_OPTS:= \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	SUBDIRS="$(PKG_BUILD_DIR)" \
+	EXTRA_CFLAGS="$(EXTRA_CFLAGS)" \
+	$(EXTRA_KCONFIG)
+
+define Build/Prepare
+	mkdir -p $(PKG_BUILD_DIR)
+	$(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+	$(MAKE) -C "$(LINUX_DIR)" \
+		$(MAKE_OPTS) \
+		modules
+endef
+
+$(eval $(call KernelPackage,pwm-gpio-custom))
+

package/pwm-gpio-custom/src/Kconfig

@@ -0,0 +1,4 @@
+config PWM_MASTER_GPIO_CUSTOM
+	tristate "Custom GPIO-based PWM driver"
+	depends on GENERIC_GPIO
+	select PWM_GENERIC_GPIO

package/pwm-gpio-custom/src/Makefile

@@ -0,0 +1 @@
+obj-${CONFIG_PWM_GPIO_CUSTOM}	+= pwm-gpio-custom.o

package/pwm-gpio-custom/src/pwm-gpio-custom.c

@@ -0,0 +1,217 @@
+/*
+ *  Custom GPIO-based PWM driver
+ *
+ *  Based on w1-gpio-custom by Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2010 Claudio Mignanti <[email protected] >
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ * ---------------------------------------------------------------------------
+ *
+ *  The behaviour of this driver can be altered by setting some parameters
+ *  from the insmod command line.
+ *
+ *  The following parameters are adjustable:
+ *
+ *	bus0	These four arguments must be arrays
+ *	bus1
+ *	.....
+ *	bus10	<id>,<pin>,<od>
+ *
+ *  where:
+ *
+ *  <id>	ID to used as device_id for the corresponding bus (required)
+ *  <pin>	GPIO pin ID for PWM channel (required)
+ * *
+ *  If this driver is built into the kernel, you can use the following kernel
+ *  command line parameters, with the same values as the corresponding module
+ *  parameters listed above:
+ *
+ *	pwm-gpio-custom.bus0
+ *	pwm-gpio-custom.bus1
+ *	pwm-gpio-custom.bunN
+ *	pwm-gpio-custom.bus10
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+
+#include <linux/pwm/pwm.h>
+
+#define DRV_NAME	"pwm-gpio-custom"
+#define DRV_DESC	"Custom GPIO-based pwm driver"
+#define DRV_VERSION	"0.1.0"
+
+#define PFX		DRV_NAME ": "
+
+#define BUS_PARAM_ID		0
+#define BUS_PARAM_PIN		1
+
+#define BUS_PARAM_REQUIRED	2
+#define BUS_PARAM_COUNT		2
+#define BUS_COUNT_MAX		10
+
+static unsigned int bus0[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus1[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus2[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus3[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus4[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus5[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus6[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus7[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus8[BUS_PARAM_COUNT] __initdata;
+static unsigned int bus9[BUS_PARAM_COUNT] __initdata;
+
+static unsigned int bus_nump[BUS_COUNT_MAX] __initdata;
+
+#define BUS_PARM_DESC " config -> id,pin"
+
+module_param_array(bus0, uint, &bus_nump[0], 0);
+MODULE_PARM_DESC(bus0, "bus0" BUS_PARM_DESC);
+module_param_array(bus1, uint, &bus_nump[1], 0);
+MODULE_PARM_DESC(bus1, "bus1" BUS_PARM_DESC);
+module_param_array(bus2, uint, &bus_nump[2], 0);
+MODULE_PARM_DESC(bus2, "bus2" BUS_PARM_DESC);
+module_param_array(bus3, uint, &bus_nump[3], 0);
+MODULE_PARM_DESC(bus3, "bus3" BUS_PARM_DESC);
+module_param_array(bus4, uint, &bus_nump[4], 0);
+MODULE_PARM_DESC(bus4, "bus4" BUS_PARM_DESC);
+module_param_array(bus5, uint, &bus_nump[5], 0);
+MODULE_PARM_DESC(bus5, "bus5" BUS_PARM_DESC);
+module_param_array(bus6, uint, &bus_nump[6], 0);
+MODULE_PARM_DESC(bus6, "bus6" BUS_PARM_DESC);
+module_param_array(bus7, uint, &bus_nump[7], 0);
+MODULE_PARM_DESC(bus7, "bus7" BUS_PARM_DESC);
+module_param_array(bus8, uint, &bus_nump[8], 0);
+MODULE_PARM_DESC(bus8, "bus8" BUS_PARM_DESC);
+module_param_array(bus9, uint, &bus_nump[9], 0);
+MODULE_PARM_DESC(bus9, "bus9" BUS_PARM_DESC);
+
+static struct platform_device *devices[BUS_COUNT_MAX];
+static unsigned int nr_devices;
+
+static void pwm_gpio_custom_cleanup(void)
+{
+	int i;
+
+	for (i = 0; i < nr_devices; i++)
+		if (devices[i])
+			platform_device_put(devices[i]);
+}
+
+static int __init pwm_gpio_custom_add_one(unsigned int id, unsigned int *params)
+{
+	struct platform_device *pdev;
+	struct gpio_pwm_platform_data pdata;
+	int err;
+
+	if (!bus_nump[id])
+		return 0;
+
+	if (bus_nump[id] < BUS_PARAM_REQUIRED) {
+		printk(KERN_ERR PFX "not enough parameters for bus%d\n", id);
+		err = -EINVAL;
+		goto err;
+	}
+
+	pdev = platform_device_alloc("gpio_pwm", params[BUS_PARAM_ID]);
+	if (!pdev) {
+		err = -ENOMEM;
+		goto err;
+	}
+
+	pdata.gpio = params[BUS_PARAM_PIN];
+
+	err = platform_device_add_data(pdev, &pdata, sizeof(pdata));
+	if (err)
+		goto err_put;
+
+	err = platform_device_add(pdev);
+	if (err)
+		goto err_put;
+
+	devices[nr_devices++] = pdev;
+	return 0;
+
+ err_put:
+	platform_device_put(pdev);
+ err:
+	return err;
+}
+
+static int __init pwm_gpio_custom_probe(void)
+{
+	int err;
+
+	nr_devices = 0;
+	printk(KERN_INFO DRV_DESC " version " DRV_VERSION "\n");
+
+	err = pwm_gpio_custom_add_one(0, bus0);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(1, bus1);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(2, bus2);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(3, bus3);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(4, bus4);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(5, bus5);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(6, bus6);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(7, bus7);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(8, bus8);
+	if (err) goto err;
+
+	err = pwm_gpio_custom_add_one(9, bus9);
+	if (err) goto err;
+
+	if (!nr_devices) {
+		printk(KERN_ERR PFX "no bus parameter(s) specified\n");
+		err = -ENODEV;
+		goto err;
+	}
+
+	return 0;
+
+err:
+	pwm_gpio_custom_cleanup();
+	return err;
+}
+
+#ifdef MODULE
+static int __init pwm_gpio_custom_init(void)
+{
+	return pwm_gpio_custom_probe();
+}
+module_init(pwm_gpio_custom_init);
+
+static void __exit pwm_gpio_custom_exit(void)
+{
+	pwm_gpio_custom_cleanup();
+}
+module_exit(pwm_gpio_custom_exit);
+#else
+subsys_initcall(pwm_gpio_custom_probe);
+#endif /* MODULE*/
+
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Bifferos <bifferos at yahoo.co.uk >");
+MODULE_AUTHOR("Claudio Mignanti <[email protected] >");
+MODULE_DESCRIPTION(DRV_DESC);
+MODULE_VERSION(DRV_VERSION);
+