ipq806x: improve mdio gpios list

Improve rediability of gpio mdio list. No functional change.

Signed-off-by: Christian Lamparter <[email protected]>
Signed-off-by: Ansuel Smith <[email protected]>
[proper authorship of the patch]
Signed-off-by: Petr Štetiar <[email protected]>

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-c2600.dts

@@ -342,7 +342,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-ea8500.dts

@@ -278,7 +278,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500.dts

@@ -223,7 +223,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-r7500v2.dts

@@ -257,7 +257,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-vr2600v.dts

@@ -254,7 +254,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wg2600hp.dts

@@ -40,7 +40,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8064-wpq864.dts

@@ -226,7 +226,8 @@
 		pinctrl-0 = <&mdio0_pins>;
 		pinctrl-names = "default";
 
-		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+		gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+			<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 
 		ethernet-phy@0 {
 			reg = <0>;

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-nbg6817.dts

@@ -222,7 +222,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";
 

target/linux/ipq806x/files-4.19/arch/arm/boot/dts/qcom-ipq8065-r7800.dts

@@ -350,7 +350,8 @@
 			compatible = "virtual,mdio-gpio";
 			#address-cells = <1>;
 			#size-cells = <0>;
-			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH &qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+			gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+				<&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
 			pinctrl-0 = <&mdio0_pins>;
 			pinctrl-names = "default";