ixp4xx: add Mikael Petterssons patch works for 2.6.33 & 2.6.35

SVN-Revision: 21879

target/linux/ixp4xx/patches-2.6.33/601-arm-dma_free_coherent.patch

@@ -0,0 +1,12 @@
+--- a/arch/arm/mm/dma-mapping.c
++++ b/arch/arm/mm/dma-mapping.c
+@@ -384,7 +384,8 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
+  */
+ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+ {
+-	WARN_ON(irqs_disabled());
++	if (irqs_disabled()) /* don't want stack dumps for these! */
++		printk("WARNING: at %s:%d %s()\n", __FILE__, __LINE__, __FUNCTION__);
+ 
+ 	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ 		return;

target/linux/ixp4xx/patches-2.6.33/603-arm-kluin-array-indexing.patch

@@ -0,0 +1,33 @@
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -322,12 +322,13 @@ static void __init setup_processor(void)
+ void cpu_init(void)
+ {
+ 	unsigned int cpu = smp_processor_id();
+-	struct stack *stk = &stacks[cpu];
++	struct stack *stk;
+ 
+ 	if (cpu >= NR_CPUS) {
+ 		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+ 		BUG();
+ 	}
++	stk = &stacks[cpu];
+ 
+ 	/*
+ 	 * Define the placement constraint for the inline asm directive below.
+@@ -386,13 +387,14 @@ static struct machine_desc * __init setu
+ 
+ static int __init arm_add_memory(unsigned long start, unsigned long size)
+ {
+-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
++	struct membank *bank;
+ 
+ 	if (meminfo.nr_banks >= NR_BANKS) {
+ 		printk(KERN_CRIT "NR_BANKS too low, "
+ 			"ignoring memory at %#lx\n", start);
+ 		return -EINVAL;
+ 	}
++	bank = &meminfo.bank[meminfo.nr_banks];
+ 
+ 	/*
+ 	 * Ensure that start/size are aligned to a page boundary.

target/linux/ixp4xx/patches-2.6.33/604-arm-ixp4xx-sched_clock.patch

@@ -0,0 +1,20 @@
+--- a/arch/arm/mach-ixp4xx/common.c
++++ b/arch/arm/mach-ixp4xx/common.c
+@@ -427,6 +427,17 @@ static void __init ixp4xx_clocksource_in
+ }
+ 
+ /*
++ * sched_clock()
++ */
++unsigned long long sched_clock(void)
++{
++	cycle_t cyc = ixp4xx_get_cycles(NULL);
++	struct clocksource *cs = &clocksource_ixp4xx;
++
++	return clocksource_cyc2ns(cyc, cs->mult, cs->shift);
++}
++
++/*
+  * clockevents
+  */
+ static int ixp4xx_set_next_event(unsigned long evt,

target/linux/ixp4xx/patches-2.6.33/605-arm-rmk-cache-flush-optim.patch

@@ -0,0 +1,11 @@
+--- a/arch/arm/mm/fault-armv.c
++++ b/arch/arm/mm/fault-armv.c
+@@ -127,8 +127,6 @@ make_coherent(struct address_space *mapp
+ 	flush_dcache_mmap_unlock(mapping);
+ 	if (aliases)
+ 		adjust_pte(vma, addr);
+-	else
+-		flush_cache_page(vma, addr, pfn);
+ }
+ 
+ /*

target/linux/ixp4xx/patches-2.6.35/050-disable_dmabounce.patch

@@ -1,8 +1,8 @@
 --- a/arch/arm/Kconfig
 +++ b/arch/arm/Kconfig
-@@ -417,7 +417,6 @@ config ARCH_IXP4XX
+@@ -435,7 +435,6 @@ config ARCH_IXP4XX
+ 	select CPU_XSCALE
  	select GENERIC_GPIO
- 	select GENERIC_TIME
  	select GENERIC_CLOCKEVENTS
 -	select DMABOUNCE if PCI
  	help
@@ -10,26 +10,24 @@
  
 --- a/arch/arm/mach-ixp4xx/Kconfig
 +++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -199,6 +199,45 @@ config IXP4XX_INDIRECT_PCI
+@@ -199,6 +199,43 @@ config IXP4XX_INDIRECT_PCI
  	  need to use the indirect method instead. If you don't know
  	  what you need, leave this option unselected.
  
 +config IXP4XX_LEGACY_DMABOUNCE
-+	bool "legacy PCI DMA bounce support"
++	bool "Legacy PCI DMA bounce support"
 +	depends on PCI
 +	default n
 +	select DMABOUNCE
 +	help
 +	  The IXP4xx is limited to a 64MB window for PCI DMA, which
-+	  requires that PCI accesses above 64MB are bounced via buffers
-+	  below 64MB. Furthermore the IXP4xx has an erratum where PCI
-+	  read prefetches just below the 64MB limit can trigger lockups.
++	  requires that PCI accesses >= 64MB are bounced via buffers
++	  below 64MB.
 +
-+	  The kernel has traditionally handled these two issue by using
-+	  ARM specific DMA bounce support code for all accesses >= 64MB.
++	  The kernel has traditionally handled this issue by using ARM
++	  specific DMA bounce support code for all accesses >= 64MB.
 +	  That code causes problems of its own, so it is desirable to
-+	  disable it. As the kernel now has a workaround for the PCI read
-+	  prefetch erratum, it no longer requires the ARM bounce code.
++	  disable it.
 +
 +	  Enabling this option makes IXP4xx continue to use the problematic
 +	  ARM DMA bounce code. Disabling this option makes IXP4xx use the
@@ -58,7 +56,7 @@
  	help
 --- a/arch/arm/mach-ixp4xx/common-pci.c
 +++ b/arch/arm/mach-ixp4xx/common-pci.c
-@@ -321,27 +321,38 @@ static int abort_handler(unsigned long a
+@@ -321,27 +321,33 @@ static int abort_handler(unsigned long a
   */
  static int ixp4xx_pci_platform_notify(struct device *dev)
  {
@@ -88,12 +86,8 @@
 +#ifdef CONFIG_DMABOUNCE
  int dma_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size)
  {
-+	/* Note that this returns true for the last page below 64M due to
-+	 * IXP4xx erratum 15 (SCR 1289), which states that PCI prefetches
-+	 * can cross the boundary between valid memory and a reserved region
-+	 * causing AHB bus errors and a lock-up.
-+	 */
- 	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
+-	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) >= SZ_64M);
++	return (dev->bus == &pci_bus_type ) && ((dma_addr + size) > SZ_64M);
  }
 +#endif
  
@@ -101,7 +95,7 @@
  /*
   * Only first 64MB of memory can be accessed via PCI.
   * We use GFP_DMA to allocate safe buffers to do map/unmap.
-@@ -364,6 +375,7 @@ void __init ixp4xx_adjust_zones(int node
+@@ -364,6 +370,7 @@ void __init ixp4xx_adjust_zones(int node
  	zhole_size[1] = zhole_size[0];
  	zhole_size[0] = 0;
  }

target/linux/ixp4xx/patches-2.6.35/601-arm-dma_free_coherent.patch

@@ -0,0 +1,12 @@
+--- a/arch/arm/mm/dma-mapping.c
++++ b/arch/arm/mm/dma-mapping.c
+@@ -381,7 +381,8 @@ EXPORT_SYMBOL(dma_mmap_writecombine);
+  */
+ void dma_free_coherent(struct device *dev, size_t size, void *cpu_addr, dma_addr_t handle)
+ {
+-	WARN_ON(irqs_disabled());
++	if (irqs_disabled()) /* don't want stack dumps for these! */
++		printk("WARNING: at %s:%d %s()\n", __FILE__, __LINE__, __FUNCTION__);
+ 
+ 	if (dma_release_from_coherent(dev, get_order(size), cpu_addr))
+ 		return;

target/linux/ixp4xx/patches-2.6.35/603-arm-kluin-array-indexing.patch

@@ -0,0 +1,33 @@
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -323,12 +323,13 @@ static void __init setup_processor(void)
+ void cpu_init(void)
+ {
+ 	unsigned int cpu = smp_processor_id();
+-	struct stack *stk = &stacks[cpu];
++	struct stack *stk;
+ 
+ 	if (cpu >= NR_CPUS) {
+ 		printk(KERN_CRIT "CPU%u: bad primary CPU number\n", cpu);
+ 		BUG();
+ 	}
++	stk = &stacks[cpu];
+ 
+ 	/*
+ 	 * Define the placement constraint for the inline asm directive below.
+@@ -387,13 +388,14 @@ static struct machine_desc * __init setu
+ 
+ static int __init arm_add_memory(unsigned long start, unsigned long size)
+ {
+-	struct membank *bank = &meminfo.bank[meminfo.nr_banks];
++	struct membank *bank;
+ 
+ 	if (meminfo.nr_banks >= NR_BANKS) {
+ 		printk(KERN_CRIT "NR_BANKS too low, "
+ 			"ignoring memory at %#lx\n", start);
+ 		return -EINVAL;
+ 	}
++	bank = &meminfo.bank[meminfo.nr_banks];
+ 
+ 	/*
+ 	 * Ensure that start/size are aligned to a page boundary.