ath79: move ubnt-xm to tiny

ath79 has was bumped to 5.10. With this, as with every kernel change,
the kernel has become larger. However, although the kernel gets bigger,
there are still enough flash resources. But the RAM reaches its capacity
limits. The tiny image comes with fewer kernel flags enabled and
fewer daemons.

Improves: 15aa53d7ee65 ("ath79: switch to Kernel 5.10")

Tested-by: Robert Foss <[email protected]>
Signed-off-by: Nick Hainke <[email protected]>

target/linux/ath79/generic/base-files/etc/board.d/01_leds

@@ -436,19 +436,11 @@ ubnt,powerbeam-5ac-gen2)
 	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "blue:rssi2" "wlan0" "51" "100"
 	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "blue:rssi3" "wlan0" "76" "100"
 	;;
-ubnt,bullet-m-ar7240|\
-ubnt,bullet-m-ar7241|\
 ubnt,bullet-m-xw|\
-ubnt,nanobridge-m|\
-ubnt,nanostation-loco-m|\
 ubnt,nanostation-loco-m-xw|\
-ubnt,nanostation-m|\
 ubnt,nanostation-m-xw|\
-ubnt,picostation-m|\
 ubnt,powerbeam-m2-xw|\
-ubnt,powerbeam-m5-xw|\
-ubnt,powerbridge-m|\
-ubnt,rocket-m)
+ubnt,powerbeam-m5-xw)
 	ucidef_set_rssimon "wlan0" "200000" "1"
 	ucidef_set_led_rssi "rssilow" "RSSILOW" "red:link1" "wlan0" "1" "100"
 	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "orange:link2" "wlan0" "26" "100"

target/linux/ath79/generic/base-files/etc/board.d/02_network

@@ -88,25 +88,18 @@ ath79_setup_interfaces()
 	tplink,tl-wa1201-v2|\
 	tplink,tl-wr902ac-v1|\
 	ubnt,bullet-ac|\
-	ubnt,bullet-m-ar7240|\
-	ubnt,bullet-m-ar7241|\
 	ubnt,bullet-m-xw|\
 	ubnt,lap-120|\
 	ubnt,litebeam-ac-gen2|\
 	ubnt,nanobeam-ac|\
 	ubnt,nanobeam-ac-xc|\
-	ubnt,nanobridge-m|\
 	ubnt,nanostation-ac-loco|\
-	ubnt,nanostation-loco-m|\
 	ubnt,nanostation-loco-m-xw|\
-	ubnt,picostation-m|\
 	ubnt,powerbeam-5ac-500|\
 	ubnt,powerbeam-5ac-gen2|\
 	ubnt,powerbeam-m2-xw|\
 	ubnt,powerbeam-m5-xw|\
-	ubnt,powerbridge-m|\
 	ubnt,rocket-5ac-lite|\
-	ubnt,rocket-m|\
 	ubnt,unifiac-lite|\
 	ubnt,unifiac-lr|\
 	ubnt,unifiac-mesh|\
@@ -176,8 +169,7 @@ ath79_setup_interfaces()
 	tplink,archer-c60-v3|\
 	tplink,tl-wdr3500-v1|\
 	tplink,tl-wr842n-v1|\
-	tplink,tl-wr842n-v3|\
-	ubnt,airrouter)
+	tplink,tl-wr842n-v3)
 		ucidef_set_interface_wan "eth1"
 		ucidef_add_switch "switch0" \
 			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
@@ -212,7 +204,6 @@ ath79_setup_interfaces()
 	tplink,wbs210-v2|\
 	tplink,wbs510-v1|\
 	tplink,wbs510-v2|\
-	ubnt,nanostation-m|\
 	ubnt,routerstation)
 		ucidef_set_interfaces_lan_wan "eth1" "eth0"
 		;;
@@ -717,15 +708,6 @@ ath79_setup_macs()
 		wan_mac=$(mtd_get_mac_text mac 0x18)
 		label_mac=$wan_mac
 		;;
-	ubnt,airrouter|\
-	ubnt,bullet-m-ar7240|\
-	ubnt,bullet-m-ar7241|\
-	ubnt,nanobridge-m|\
-	ubnt,nanostation-loco-m|\
-	ubnt,nanostation-m|\
-	ubnt,picostation-m|\
-	ubnt,powerbridge-m|\
-	ubnt,rocket-m|\
 	ubnt,unifi)
 		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
 		;;

target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -115,16 +115,7 @@ case "$FIRMWARE" in
 	netgear,wnr2200-16m|\
 	pcs,cap324|\
 	tplink,tl-wr2543-v1|\
-	tplink,tl-wr842n-v1|\
-	ubnt,airrouter|\
-	ubnt,bullet-m-ar7240|\
-	ubnt,bullet-m-ar7241|\
-	ubnt,nanobridge-m|\
-	ubnt,nanostation-loco-m|\
-	ubnt,nanostation-m|\
-	ubnt,picostation-m|\
-	ubnt,powerbridge-m|\
-	ubnt,rocket-m)
+	tplink,tl-wr842n-v1)
 		caldata_extract "art" 0x1000 0x1000
 		;;
 	openmesh,mr600-v1|\

target/linux/ath79/image/Makefile

@@ -105,6 +105,7 @@ endif
 ifeq ($(SUBTARGET),tiny)
 include tiny-netgear.mk
 include tiny-tp-link.mk
+include tiny-ubnt.mk
 endif
 
 $(eval $(call BuildImage))

target/linux/ath79/image/common-ubnt.mk

@@ -0,0 +1,142 @@
+DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
+
+# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
+# VERSION_DIST being on the place of major(?) version number, so we need to
+# use some number.
+UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
+
+# mkubntimage is using the kernel image direct
+# routerboard creates partitions out of the ubnt header
+define Build/mkubntimage
+	-$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+		-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+		-k $(IMAGE_KERNEL) -r $@ -o $@
+endef
+
+define Build/mkubntimage2
+	-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
+		-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
+		-p jffs2:0x50000:0xf60000:0:0:$@ \
+		-o [email protected]
+	@mv [email protected] $@
+endef
+
+# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
+# booting the image, the size doesn't matter.
+define Build/mkubntimage-split
+	-[ -f $@ ] && ( \
+	dd if=$@ [email protected] bs=1024k count=1; \
+	dd if=$@ [email protected] bs=1024k skip=1; \
+	$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
+		-v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
+		-k [email protected] -r [email protected] -o $@; \
+	rm [email protected] [email protected] )
+endef
+
+# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
+# UBNT_TYPE e.g. one of (BZ, XM, XW)
+# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
+# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
+define Device/ubnt
+  DEVICE_VENDOR := Ubiquiti
+  DEVICE_PACKAGES := kmod-usb2
+  IMAGES += factory.bin
+  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
+	append-rootfs | pad-rootfs | check-size | mkubntimage-split
+endef
+
+define Device/ubnt-bz
+  $(Device/ubnt)
+  SOC := ar7241
+  IMAGE_SIZE := 7448k
+  UBNT_BOARD := XM
+  UBNT_CHIP := ar7240
+  UBNT_TYPE := BZ
+  UBNT_VERSION := 6.0.0
+endef
+
+define Device/ubnt-sw
+  $(Device/ubnt)
+  SOC := ar7242
+  DEVICE_PACKAGES += kmod-usb-ohci
+  IMAGE_SIZE := 7552k
+  UBNT_BOARD := SW
+  UBNT_CHIP := ar7240
+  UBNT_TYPE := SW
+  UBNT_VERSION := 1.4.1
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
+endef
+
+define Device/ubnt-2wa
+  $(Device/ubnt)
+  SOC := ar9342
+  IMAGE_SIZE := 15744k
+  UBNT_BOARD := WA
+  UBNT_CHIP := ar934x
+  UBNT_TYPE := 2WA
+  UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-wa
+  $(Device/ubnt)
+  SOC := ar9342
+  IMAGE_SIZE := 15744k
+  UBNT_BOARD := WA
+  UBNT_CHIP := ar934x
+  UBNT_TYPE := WA
+  UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-xc
+  $(Device/ubnt)
+  IMAGE_SIZE := 15744k
+  UBNT_BOARD := XC
+  UBNT_CHIP := qca955x
+  UBNT_TYPE := XC
+  UBNT_VERSION := 8.5.3
+endef
+
+define Device/ubnt-xm
+  $(Device/ubnt)
+  DEVICE_VARIANT := XM
+  DEVICE_PACKAGES += kmod-usb-ohci
+  IMAGE_SIZE := 7448k
+  UBNT_BOARD := XM
+  UBNT_CHIP := ar7240
+  UBNT_REVISION := 42.$(UBNT_REVISION)
+  UBNT_TYPE := XM
+  UBNT_VERSION := 6.0.0
+  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
+endef
+
+define Device/ubnt-xw
+  $(Device/ubnt)
+  SOC := ar9342
+  DEVICE_VARIANT := XW
+  IMAGE_SIZE := 7552k
+  UBNT_BOARD := XM
+  UBNT_CHIP := ar934x
+  UBNT_REVISION := 42.$(UBNT_REVISION)
+  UBNT_TYPE := XW
+  UBNT_VERSION := 6.0.4
+endef
+
+define Device/ubnt-unifi-jffs2
+  $(Device/ubnt)
+  KERNEL_SIZE := 3072k
+  IMAGE_SIZE := 15744k
+  UBNT_TYPE := BZ
+  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0
+  IMAGES := sysupgrade.bin factory.bin
+  IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\
+	pad-rootfs | check-size | append-metadata
+  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
+endef
+
+define Device/ubnt-acb
+  $(Device/ubnt)
+  IMAGE_SIZE := 15744k
+  UBNT_BOARD := ACB
+  UBNT_TYPE := ACB
+  UBNT_VERSION := 2.5.0
+endef

target/linux/ath79/image/generic-ubnt.mk

@@ -1,145 +1,4 @@
-DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE UBNT_VERSION UBNT_REVISION
-
-# On M (XW) devices the U-Boot as of version 1.1.4-s1039 doesn't like
-# VERSION_DIST being on the place of major(?) version number, so we need to
-# use some number.
-UBNT_REVISION := $(VERSION_DIST)-$(REVISION)
-
-# mkubntimage is using the kernel image direct
-# routerboard creates partitions out of the ubnt header
-define Build/mkubntimage
-	-$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
-		-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-		-k $(IMAGE_KERNEL) -r $@ -o $@
-endef
-
-define Build/mkubntimage2
-	-$(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \
-		-v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-$(VERSION_DIST)-$(REVISION) \
-		-p jffs2:0x50000:0xf60000:0:0:$@ \
-		-o [email protected]
-	@mv [email protected] $@
-endef
-
-# all UBNT XM/WA devices expect the kernel image to have 1024k while flash, when
-# booting the image, the size doesn't matter.
-define Build/mkubntimage-split
-	-[ -f $@ ] && ( \
-	dd if=$@ [email protected] bs=1024k count=1; \
-	dd if=$@ [email protected] bs=1024k skip=1; \
-	$(STAGING_DIR_HOST)/bin/mkfwimage -B $(UBNT_BOARD) \
-		-v $(UBNT_TYPE).$(UBNT_CHIP).v$(UBNT_VERSION)-$(UBNT_REVISION) \
-		-k [email protected] -r [email protected] -o $@; \
-	rm [email protected] [email protected] )
-endef
-
-# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM)
-# UBNT_TYPE e.g. one of (BZ, XM, XW)
-# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x)
-# UBNT_VERSION e.g. one of (6.0.0, 8.5.3)
-define Device/ubnt
-  DEVICE_VENDOR := Ubiquiti
-  DEVICE_PACKAGES := kmod-usb2
-  IMAGES += factory.bin
-  IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
-	append-rootfs | pad-rootfs | check-size | mkubntimage-split
-endef
-
-define Device/ubnt-bz
-  $(Device/ubnt)
-  SOC := ar7241
-  IMAGE_SIZE := 7448k
-  UBNT_BOARD := XM
-  UBNT_CHIP := ar7240
-  UBNT_TYPE := BZ
-  UBNT_VERSION := 6.0.0
-endef
-
-define Device/ubnt-sw
-  $(Device/ubnt)
-  SOC := ar7242
-  DEVICE_PACKAGES += kmod-usb-ohci
-  IMAGE_SIZE := 7552k
-  UBNT_BOARD := SW
-  UBNT_CHIP := ar7240
-  UBNT_TYPE := SW
-  UBNT_VERSION := 1.4.1
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
-endef
-
-define Device/ubnt-2wa
-  $(Device/ubnt)
-  SOC := ar9342
-  IMAGE_SIZE := 15744k
-  UBNT_BOARD := WA
-  UBNT_CHIP := ar934x
-  UBNT_TYPE := 2WA
-  UBNT_VERSION := 8.5.3
-endef
-
-define Device/ubnt-wa
-  $(Device/ubnt)
-  SOC := ar9342
-  IMAGE_SIZE := 15744k
-  UBNT_BOARD := WA
-  UBNT_CHIP := ar934x
-  UBNT_TYPE := WA
-  UBNT_VERSION := 8.5.3
-endef
-
-define Device/ubnt-xc
-  $(Device/ubnt)
-  IMAGE_SIZE := 15744k
-  UBNT_BOARD := XC
-  UBNT_CHIP := qca955x
-  UBNT_TYPE := XC
-  UBNT_VERSION := 8.5.3
-endef
-
-define Device/ubnt-xm
-  $(Device/ubnt)
-  DEVICE_VARIANT := XM
-  DEVICE_PACKAGES += kmod-usb-ohci
-  IMAGE_SIZE := 7448k
-  UBNT_BOARD := XM
-  UBNT_CHIP := ar7240
-  UBNT_REVISION := 42.$(UBNT_REVISION)
-  UBNT_TYPE := XM
-  UBNT_VERSION := 6.0.0
-  KERNEL := kernel-bin | append-dtb | relocate-kernel | lzma | uImage lzma
-endef
-
-define Device/ubnt-xw
-  $(Device/ubnt)
-  SOC := ar9342
-  DEVICE_VARIANT := XW
-  IMAGE_SIZE := 7552k
-  UBNT_BOARD := XM
-  UBNT_CHIP := ar934x
-  UBNT_REVISION := 42.$(UBNT_REVISION)
-  UBNT_TYPE := XW
-  UBNT_VERSION := 6.0.4
-endef
-
-define Device/ubnt-unifi-jffs2
-  $(Device/ubnt)
-  KERNEL_SIZE := 3072k
-  IMAGE_SIZE := 15744k
-  UBNT_TYPE := BZ
-  KERNEL := kernel-bin | append-dtb | lzma | uImage lzma | jffs2 kernel0
-  IMAGES := sysupgrade.bin factory.bin
-  IMAGE/sysupgrade.bin := append-kernel | pad-to $$$$(KERNEL_SIZE) | append-rootfs |\
-	pad-rootfs | check-size | append-metadata
-  IMAGE/factory.bin := $$(IMAGE/sysupgrade.bin) | mkubntimage2
-endef
-
-define Device/ubnt-acb
-  $(Device/ubnt)
-  IMAGE_SIZE := 15744k
-  UBNT_BOARD := ACB
-  UBNT_TYPE := ACB
-  UBNT_VERSION := 2.5.0
-endef
+include ./common-ubnt.mk
 
 define Device/ubnt_aircube-ac
   $(Device/ubnt-acb)
@@ -159,14 +18,6 @@ define Device/ubnt_aircube-isp
 endef
 TARGET_DEVICES += ubnt_aircube-isp
 
-define Device/ubnt_airrouter
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := AirRouter
-  SUPPORTED_DEVICES += airrouter
-endef
-TARGET_DEVICES += ubnt_airrouter
-
 define Device/ubnt_bullet-ac
   $(Device/ubnt-2wa)
   DEVICE_MODEL := Bullet AC
@@ -174,26 +25,6 @@ define Device/ubnt_bullet-ac
 endef
 TARGET_DEVICES += ubnt_bullet-ac
 
-define Device/ubnt_bullet-m-ar7240
-  $(Device/ubnt-xm)
-  SOC := ar7240
-  DEVICE_MODEL := Bullet M
-  DEVICE_VARIANT := XM (AR7240)
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m
-endef
-TARGET_DEVICES += ubnt_bullet-m-ar7240
-
-define Device/ubnt_bullet-m-ar7241
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := Bullet M
-  DEVICE_VARIANT := XM (AR7241)
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m ubnt,bullet-m
-endef
-TARGET_DEVICES += ubnt_bullet-m-ar7241
-
 define Device/ubnt_bullet-m-xw
   $(Device/ubnt-xw)
   DEVICE_MODEL := Bullet M
@@ -263,15 +94,6 @@ define Device/ubnt_nanobeam-m5-xw
 endef
 TARGET_DEVICES += ubnt_nanobeam-m5-xw
 
-define Device/ubnt_nanobridge-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := NanoBridge M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m
-endef
-TARGET_DEVICES += ubnt_nanobridge-m
-
 define Device/ubnt_nanostation-ac
   $(Device/ubnt-wa)
   DEVICE_MODEL := Nanostation AC
@@ -286,15 +108,6 @@ define Device/ubnt_nanostation-ac-loco
 endef
 TARGET_DEVICES += ubnt_nanostation-ac-loco
 
-define Device/ubnt_nanostation-loco-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := Nanostation Loco M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m
-endef
-TARGET_DEVICES += ubnt_nanostation-loco-m
-
 define Device/ubnt_nanostation-loco-m-xw
   $(Device/ubnt-xw)
   DEVICE_MODEL := Nanostation Loco M
@@ -303,15 +116,6 @@ define Device/ubnt_nanostation-loco-m-xw
 endef
 TARGET_DEVICES += ubnt_nanostation-loco-m-xw
 
-define Device/ubnt_nanostation-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := Nanostation M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += nanostation-m
-endef
-TARGET_DEVICES += ubnt_nanostation-m
-
 define Device/ubnt_nanostation-m-xw
   $(Device/ubnt-xw)
   DEVICE_MODEL := Nanostation M
@@ -320,15 +124,6 @@ define Device/ubnt_nanostation-m-xw
 endef
 TARGET_DEVICES += ubnt_nanostation-m-xw
 
-define Device/ubnt_picostation-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := Picostation M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m
-endef
-TARGET_DEVICES += ubnt_picostation-m
-
 define Device/ubnt_powerbeam-5ac-500
   $(Device/ubnt-xc)
   SOC := qca9558
@@ -362,15 +157,6 @@ define Device/ubnt_powerbeam-m5-xw
 endef
 TARGET_DEVICES += ubnt_powerbeam-m5-xw
 
-define Device/ubnt_powerbridge-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := PowerBridge M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += bullet-m
-endef
-TARGET_DEVICES += ubnt_powerbridge-m
-
 define Device/ubnt_rocket-5ac-lite
   $(Device/ubnt-xc)
   SOC := qca9558
@@ -380,15 +166,6 @@ define Device/ubnt_rocket-5ac-lite
 endef
 TARGET_DEVICES += ubnt_rocket-5ac-lite
 
-define Device/ubnt_rocket-m
-  $(Device/ubnt-xm)
-  SOC := ar7241
-  DEVICE_MODEL := Rocket M
-  DEVICE_PACKAGES += rssileds
-  SUPPORTED_DEVICES += rocket-m
-endef
-TARGET_DEVICES += ubnt_rocket-m
-
 define Device/ubnt_routerstation_common
   DEVICE_PACKAGES := -kmod-ath9k -wpad-basic-wolfssl -uboot-envtools kmod-usb-ohci \
 	kmod-usb2 fconfig

target/linux/ath79/image/generic.mk

@@ -3,6 +3,7 @@ include ./common-netgear.mk
 include ./common-senao.mk
 include ./common-tp-link.mk
 include ./common-yuncore.mk
+include ./common-ubnt.mk
 
 DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
 DEVICE_VARS += SEAMA_SIGNATURE SEAMA_MTDBLOCK

target/linux/ath79/image/tiny-ubnt.mk

@@ -0,0 +1,83 @@
+include ./common-ubnt.mk
+
+define Device/ubnt_airrouter
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := AirRouter
+  SUPPORTED_DEVICES += airrouter
+endef
+TARGET_DEVICES += ubnt_airrouter
+
+define Device/ubnt_nanobridge-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := NanoBridge M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanobridge-m
+
+define Device/ubnt_bullet-m-ar7240
+  $(Device/ubnt-xm)
+  SOC := ar7240
+  DEVICE_MODEL := Bullet M
+  DEVICE_VARIANT := XM (AR7240)
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7240
+
+define Device/ubnt_bullet-m-ar7241
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := Bullet M
+  DEVICE_VARIANT := XM (AR7241)
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m ubnt,bullet-m
+endef
+TARGET_DEVICES += ubnt_bullet-m-ar7241
+
+define Device/ubnt_picostation-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := Picostation M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_picostation-m
+
+define Device/ubnt_nanostation-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := Nanostation M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += nanostation-m
+endef
+TARGET_DEVICES += ubnt_nanostation-m
+
+define Device/ubnt_nanostation-loco-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := Nanostation Loco M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_nanostation-loco-m
+
+define Device/ubnt_powerbridge-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := PowerBridge M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += bullet-m
+endef
+TARGET_DEVICES += ubnt_powerbridge-m
+
+define Device/ubnt_rocket-m
+  $(Device/ubnt-xm)
+  SOC := ar7241
+  DEVICE_MODEL := Rocket M
+  DEVICE_PACKAGES += rssileds
+  SUPPORTED_DEVICES += rocket-m
+endef
+TARGET_DEVICES += ubnt_rocket-m

target/linux/ath79/tiny/base-files/etc/board.d/01_leds

@@ -110,6 +110,20 @@ tplink,tl-wr941nd-v6)
 tplink,tl-wr940n-v6)
 	ucidef_set_led_netdev "wan" "WAN" "blue:wan" "eth1"
 	;;
+ubnt,bullet-m-ar7240|\
+ubnt,bullet-m-ar7241|\
+ubnt,nanobridge-m|\
+ubnt,nanostation-loco-m|\
+ubnt,nanostation-m|\
+ubnt,picostation-m|\
+ubnt,powerbridge-m|\
+ubnt,rocket-m)
+	ucidef_set_rssimon "wlan0" "200000" "1"
+	ucidef_set_led_rssi "rssilow" "RSSILOW" "red:link1" "wlan0" "1" "100"
+	ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "orange:link2" "wlan0" "26" "100"
+	ucidef_set_led_rssi "rssimediumhigh" "RSSIMEDIUMHIGH" "green:link3" "wlan0" "51" "100"
+	ucidef_set_led_rssi "rssihigh" "RSSIHIGH" "green:link4" "wlan0" "76" "100"
+	;;
 esac
 
 board_config_flush

target/linux/ath79/tiny/base-files/etc/board.d/02_network

@@ -49,7 +49,14 @@ ath79_setup_interfaces()
 	tplink,tl-wa901nd-v5|\
 	tplink,tl-wr703n|\
 	tplink,tl-wr802n-v1|\
-	tplink,tl-wr802n-v2)
+	tplink,tl-wr802n-v2|\
+	ubnt,bullet-m-ar7240|\
+	ubnt,bullet-m-ar7241|\
+	ubnt,nanobridge-m|\
+	ubnt,picostation-m|\
+	ubnt,nanostation-loco-m|\
+	ubnt,powerbridge-m|\
+	ubnt,rocket-m)
 		ucidef_set_interface_lan "eth0"
 		;;
 	engenius,enh202-v1)
@@ -96,6 +103,14 @@ ath79_setup_interfaces()
 		ucidef_add_switch "switch0" \
 			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
 		;;
+	ubnt,airrouter)
+		ucidef_set_interface_wan "eth1"
+		ucidef_add_switch "switch0" \
+			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
+		;;
+	ubnt,nanostation-m)
+		ucidef_set_interfaces_lan_wan "eth1" "eth0"
+		;;
 	*)
 		ucidef_set_interfaces_lan_wan "eth0" "eth1"
 		;;
@@ -112,7 +127,16 @@ ath79_setup_macs()
 		wan_mac=$(mtd_get_mac_ascii "nvram" "wan_mac")
 		label_mac=$wan_mac
 		;;
-	engenius,enh202-v1)
+	engenius,enh202-v1|\
+	ubnt,airrouter|\
+	ubnt,bullet-m-ar7240|\
+	ubnt,bullet-m-ar7241|\
+	ubnt,nanobridge-m|\
+	ubnt,nanostation-loco-m|\
+	ubnt,nanostation-m|\
+	ubnt,picostation-m|\
+	ubnt,powerbridge-m|\
+	ubnt,rocket-m)
 		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
 		;;
 	tplink,tl-wr941-v2|\

target/linux/ath79/tiny/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom

@@ -36,7 +36,16 @@ case "$FIRMWARE" in
 	tplink,tl-wr740n-v3|\
 	tplink,tl-wr741-v1|\
 	tplink,tl-wr743nd-v1|\
-	tplink,tl-wr841-v7)
+	tplink,tl-wr841-v7|\
+	ubnt,airrouter|\
+	ubnt,bullet-m-ar7240|\
+	ubnt,bullet-m-ar7241|\
+	ubnt,nanobridge-m|\
+	ubnt,nanostation-loco-m|\
+	ubnt,nanostation-m|\
+	ubnt,picostation-m|\
+	ubnt,powerbridge-m|\
+	ubnt,rocket-m)
 		caldata_extract "art" 0x1000 0x1000
 		;;
 	pqi,air-pen)