lantiq: cleanup the dsl control scripts

Signed-off-by: John Crispin <[email protected]>

SVN-Revision: 40381

package/network/config/ltq-adsl-app/Config.in

@@ -1,9 +0,0 @@
-config LTQ_DSL_ENABLE_SOAP
-	bool "Enable SOAP support"
-	depends on PACKAGE_ltq-dsl-app
-	default n
-
-config LTQ_DSL_ENABLE_DSL_EVENT_POLLING
-	bool "Include Event Polling support"
-	depends on PACKAGE_ltq-dsl-app
-	default n

package/network/config/ltq-adsl-app/Makefile

@@ -40,10 +40,6 @@ define Package/ltq-adsl-app/description
 	Infineon DSL CPE API for Amazon SE, Danube and Vinax.
 endef
 
-define Package/ltq-adsl-app/config
-	source "$(SOURCE)/Config.in"
-endef
-
 LTQ_DSL_MAX_DEVICE=1
 LTQ_DSL_LINES_PER_DEVICE=1
 LTQ_DSL_CHANNELS_PER_LINE=1
@@ -74,16 +70,6 @@ CONFIGURE_ARGS += \
 	--enable-dsl-pm-line-thresholds \
 	--enable-dsl-pm-optional-parameters
 
-ifeq ($(CONFIG_LTQ_DSL_ENABLE_SOAP),y)
-CONFIGURE_ARGS += \
-	--enable-soap-support
-endif
-
-ifeq ($(CONFIG_LTQ_DSL_ENABLE_DSL_EVENT_POLLING),y)
-CONFIGURE_ARGS += \
-	--enable-dsl-event-polling
-endif
-
 TARGET_CFLAGS += -I$(LINUX_DIR)/include
 
 define Package/ltq-adsl-app/install
@@ -92,7 +78,6 @@ define Package/ltq-adsl-app/install
 
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin
-	$(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin
 endef
 
 $(eval $(call BuildPackage,ltq-adsl-app))

package/network/config/ltq-adsl-app/files/dsl_control

@@ -10,252 +10,7 @@ EXTRA_HELP="	status  Get DSL status information
 SERVICE_DAEMONIZE=1
 SERVICE_WRITE_PID=1
 
-#
-# Basic functions to send CLI commands to the dsl_cpe_control daemon
-#
-dsl_cmd() {
-	killall -0 dsl_cpe_control && (
-		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
-		cat /tmp/pipe/dsl_cpe0_ack
-	)
-}
-dsl_val() {
-	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
-}
-
-#
-# Simple divide by 10 routine to cope with one decimal place
-#
-dbt() {
-	local a=$(expr $1 / 10)
-	local b=$(expr $1 % 10)
-	echo "${a}.${b}"
-}
-#
-# Take a number and convert to k or meg
-#
-scale() {
-	local val=$1
-	local a
-	local b
-
-	if [ "$val" -gt 1000000 ]; then
-		a=$(expr $val / 1000)
-		b=$(expr $a % 1000)
-		a=$(expr $a / 1000)
-		printf "%d.%03d Mb" ${a} ${b}
-	elif [ "$val" -gt 1000 ]; then
-		a=$(expr $val / 1000)
-		printf "%d Kb" ${a}
-	else
-		echo "${val} b"
-	fi
-}
-
-#
-# Read the data rates for both directions
-#
-data_rates() {
-	local csg
-	local dru
-	local drd
-	local sdru
-	local sdrd
-
-	csg=$(dsl_cmd g997csg 0 1)
-	drd=$(dsl_val "$csg" ActualDataRate)
-
-	csg=$(dsl_cmd g997csg 0 0)
-	dru=$(dsl_val "$csg" ActualDataRate)
-
-	[ -z "$drd" ] && drd=0
-	[ -z "$dru" ] && dru=0
-
-	sdrd=$(scale $drd)
-	sdru=$(scale $dru)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.data_rate_down=$drd"
-		echo "dsl.data_rate_up=$dru"
-		echo "dsl.data_rate_down_s=\"$sdrd\""
-		echo "dsl.data_rate_up_s=\"$sdru\""
-	else
-		echo "Data Rate:		${sdrd}/s / ${sdru}/s"
-	fi
-}
-
-#
-# Chipset
-#
-chipset() {
-	local vig
-	local cs
-	local csv
-
-	vig=$(dsl_cmd vig)
-	cs=$(dsl_val "$vig" DSL_ChipSetType)
-	csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.chipset=\"${cs} ${csv}\""
-	else
-		echo "Chipset:		${cs} ${csv}"
-	fi
-}
-
-#
-# Work out how long the line has been up
-#
-line_uptime() {
-	local ccsg
-	local et
-	local etr
-	local d
-	local h
-	local m
-	local s
-	local rc=""
-
-	ccsg=$(dsl_cmd pmccsg 0 0 0)
-	et=$(dsl_val "$ccsg" nElapsedTime)
-
-	[ -z "$et" ] && et=0
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_uptime=${et}"
-		return
-	fi
-
-	d=$(expr $et / 86400)
-	etr=$(expr $et % 86400)
-	h=$(expr $etr / 3600)
-	etr=$(expr $etr % 3600)
-	m=$(expr $etr / 60)
-	s=$(expr $etr % 60)
-
-
-	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
-	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
-	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
-	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
-
-	[ -z "$rc" ] && rc="down"
-	echo "Line Uptime:		${rc}"
-}
-
-#
-# Get noise and attenuation figures
-#
-line_data() {
-	local lsg
-	local latnu
-	local latnd
-	local snru
-	local snrd
-
-	lsg=$(dsl_cmd g997lsg 1 1)
-	latnd=$(dsl_val "$lsg" LATN)
-	snrd=$(dsl_val "$lsg" SNR)
-
-	lsg=$(dsl_cmd g997lsg 0 1)
-	latnu=$(dsl_val "$lsg" LATN)
-	snru=$(dsl_val "$lsg" SNR)
-
-	[ -z "$latnd" ] && latnd=0
-	[ -z "$latnu" ] && latnu=0
-	[ -z "$snrd" ] && snrd=0
-	[ -z "$snru" ] && snru=0
-
-	latnd=$(dbt $latnd)
-	latnu=$(dbt $latnu)
-	snrd=$(dbt $snrd)
-	snru=$(dbt $snru)
-	
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_attenuation_down=$latnd"
-		echo "dsl.line_attenuation_up=$latnu"
-		echo "dsl.noise_margin_down=$snrd"
-		echo "dsl.noise_margin_up=$snru"
-	else
-		echo "Line Attenuation:	${latnd}dB / ${latnu}dB"
-		echo "Noise Margin:		${snrd}dB / ${snru}dB"
-	fi
-}
-
-#
-# Is the line up? Or what state is it in?
-#
-line_state() {
-	local lsg=$(dsl_cmd lsg)
-	local ls=$(dsl_val "$lsg" nLineState);
-	local s;
-
-	case "$ls" in
-		"0x0")		s="not initialized" ;;
-		"0x1")		s="exception" ;;
-		"0x10")		s="not updated" ;;
-		"0xff")		s="idle request" ;;
-		"0x100")	s="idle" ;;
-		"0x1ff")	s="silent request" ;;
-		"0x200")	s="silent" ;;
-		"0x300")	s="handshake" ;;
-		"0x380")	s="full_init" ;;
-		"0x400")	s="discovery" ;;
-		"0x500")	s="training" ;;
-		"0x600")	s="analysis" ;;
-		"0x700")	s="exchange" ;;
-		"0x800")	s="showtime_no_sync" ;;
-		"0x801")	s="showtime_tc_sync" ;;
-		"0x900")	s="fastretrain" ;;
-		"0xa00")	s="lowpower_l2" ;;
-		"0xb00")	s="loopdiagnostic active" ;;
-		"0xb10")	s="loopdiagnostic data exchange" ;;
-		"0xb20")	s="loopdiagnostic data request" ;;
-		"0xc00")	s="loopdiagnostic complete" ;;
-		"0x1000000")	s="test" ;;
-		"0xd00")	s="resync" ;;
-		"0x3c0")	s="short init entry" ;;
-		"")		s="not running daemon"; ls="0xfff" ;;
-		*)		s="unknown" ;;
-	esac
-
-	if [ $action = "lucistat" ]; then
-		echo "dsl.line_state_num=$ls"
-		echo "dsl.line_state_detail=\"$s\""
-		if [ "$ls" = "0x801" ]; then
-			echo "dsl.line_state=\"UP\""
-		else
-			echo "dsl.line_state=\"DOWN\""
-		fi
-	else
-		if [ "$ls" = "0x801" ]; then
-			echo "Line State:		UP [$ls: $s]"
-		else
-			echo "Line State:		DOWN [$ls: $s]"
-		fi
-	fi
-}
-
-#
-# Main status routine
-#
-status() {
-	chipset
-	line_state
-	data_rates
-	line_data
-	line_uptime
-}
-
-#
-# Luci (lua) compatible version that's easy to parse
-#
-lucistat() {
-	echo "local dsl={}"
-	status
-	echo "return dsl"
-}
-
+. /lib/functions/lantiq_dsl.sh
 
 annex_b=10_00_10_00_00_04_00_00
 annex_bdmt=10_00_00_00_00_00_00_00
@@ -272,9 +27,6 @@ annex_m=00_00_00_00_40_00_04_00
 annex_m2=00_00_00_00_40_00_00_00
 annex_m2p=00_00_00_00_00_00_04_00
 
-#
-# Simple start routine
-#
 start() {
 	local annex
 	local firmware
@@ -283,24 +35,16 @@ start() {
 	config_get annex wan annex
 	config_get firmware wan firmware
 
-	# get xtu
 	eval "xtu=\"\${annex_$annex}\""
 
-	# check for firmware
 	[ -z "${firmware}" ] &&
 		firmware=adsl.bin
 
-	# start CPE dsl daemon in the background
 	service_start /sbin/dsl_cpe_control -i${xtu} \
 			-n /sbin/dsl_notify.sh \
 			-f /lib/firmware/${firmware}
 }
 
-#
-# For stop we want to simulate the notification call for when
-# the line goes down, so that we can stop the ppp link before
-# we die.
-#
 stop() {
 	DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
 	DSL_INTERFACE_STATUS="DOWN" \

package/network/config/ltq-adsl-app/files/dsl_notify.sh

@@ -1,44 +0,0 @@
-#!/bin/sh
-#
-# This script is called by dsl_cpe_control whenever there is a DSL event,
-# we only actually care about the DSL_INTERFACE_STATUS events as these
-# tell us the line has either come up or gone down.
-#
-# The rest of the code is basically the same at the atm hotplug code
-#
-
-[ "$DSL_NOTIFICATION_TYPE" = "DSL_INTERFACE_STATUS" ] || exit 0
-
-. /lib/functions.sh
-
-include /lib/network
-scan_interfaces
-
-local found=0
-local ifc
-for ifc in $interfaces; do
-	local up
-	config_get_bool up "$ifc" up 0
-
-	local auto
-	config_get_bool auto "$ifc" auto 1
-
-	local proto
-	config_get proto "$ifc" proto
-
-	if [ "$DSL_INTERFACE_STATUS" = "UP" ]; then
-		if [ "$proto" = "pppoa" ] && [ "$up" != 1 ] && [ "$auto" = 1 ]; then
-			found=1
-			( sleep 1; ifup "$ifc" ) &
-		fi
-	else
-		if [ "$proto" = "pppoa" ] && [ "$up" = 1 ] && [ "$auto" = 1 ]; then
-			found=1
-			( sleep 1; ifdown "$ifc" ) &
-		fi
-	fi
-done
-
-if [ "$found" != 1 ]; then
-	logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)"
-fi

package/network/config/ltq-vdsl-app/Makefile

@@ -71,7 +71,6 @@ define Package/ltq-vdsl-app/install
 
 	$(INSTALL_DIR) $(1)/sbin
 	$(INSTALL_BIN) $(PKG_BUILD_DIR)/src/dsl_cpe_control $(1)/sbin/vdsl_cpe_control
-	$(INSTALL_BIN) ./files/dsl_notify.sh $(1)/sbin
 endef
 
 $(eval $(call BuildPackage,ltq-vdsl-app))

package/network/config/ltq-vdsl-app/files/dsl_control

@@ -10,297 +10,29 @@ EXTRA_HELP="	status  Get DSL status information
 SERVICE_DAEMONIZE=1
 SERVICE_WRITE_PID=1
 
-#
-# Basic functions to send CLI commands to the vdsl_cpe_control daemon
-#
-dsl_cmd() {
-	killall -0 vdsl_cpe_control && (
-		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
-		cat /tmp/pipe/dsl_cpe0_ack
-	)
-}
-dsl_val() {
-	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
-}
-
-#
-# Simple divide by 10 routine to cope with one decimal place
-#
-dbt() {
-	local a=$(expr $1 / 10)
-	local b=$(expr $1 % 10)
-	echo "${a}.${b}"
-}
-#
-# Take a number and convert to k or meg
-#
-scale() {
-	local val=$1
-	local a
-	local b
-
-	if [ "$val" -gt 1000000 ]; then
-		a=$(expr $val / 1000)
-		b=$(expr $a % 1000)
-		a=$(expr $a / 1000)
-		printf "%d.%03d Mb" ${a} ${b}
-	elif [ "$val" -gt 1000 ]; then
-		a=$(expr $val / 1000)
-		printf "%d Kb" ${a}
-	else
-		echo "${val} b"
-	fi
-}
-
-#
-# Read the data rates for both directions
-#
-data_rates() {
-	local csg
-	local dru
-	local drd
-	local sdru
-	local sdrd
-
-	csg=$(dsl_cmd g997csg 0 1)
-	drd=$(dsl_val "$csg" ActualDataRate)
-
-	csg=$(dsl_cmd g997csg 0 0)
-	dru=$(dsl_val "$csg" ActualDataRate)
-
-	[ -z "$drd" ] && drd=0
-	[ -z "$dru" ] && dru=0
-
-	sdrd=$(scale $drd)
-	sdru=$(scale $dru)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.data_rate_down=$drd"
-		echo "dsl.data_rate_up=$dru"
-		echo "dsl.data_rate_down_s=\"$sdrd\""
-		echo "dsl.data_rate_up_s=\"$sdru\""
-	else
-		echo "Data Rate:		${sdrd}/s / ${sdru}/s"
-	fi
-}
+. /lib/functions/lantiq_dsl.sh
+XDSL_CTRL=vdsl_cpe_control
 
-#
-# Chipset
-#
-chipset() {
-	local vig
-	local cs
-	local csv
-
-	vig=$(dsl_cmd vig)
-	cs=$(dsl_val "$vig" DSL_ChipSetType)
-	csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.chipset=\"${cs} ${csv}\""
-	else
-		echo "Chipset:		${cs} ${csv}"
-	fi
-}
-
-#
-# Work out how long the line has been up
-#
-line_uptime() {
-	local ccsg
-	local et
-	local etr
-	local d
-	local h
-	local m
-	local s
-	local rc=""
-
-	ccsg=$(dsl_cmd pmccsg 0 0 0)
-	et=$(dsl_val "$ccsg" nElapsedTime)
-
-	[ -z "$et" ] && et=0
-
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_uptime=${et}"
-		return
-	fi
-
-	d=$(expr $et / 86400)
-	etr=$(expr $et % 86400)
-	h=$(expr $etr / 3600)
-	etr=$(expr $etr % 3600)
-	m=$(expr $etr / 60)
-	s=$(expr $etr % 60)
-
-
-	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
-	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
-	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
-	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
-
-	[ -z "$rc" ] && rc="down"
-	echo "Line Uptime:		${rc}"
-}
-
-#
-# Get noise and attenuation figures
-#
-line_data() {
-	local lsg
-	local latnu
-	local latnd
-	local snru
-	local snrd
-
-	lsg=$(dsl_cmd g997lsg 1 1)
-	latnd=$(dsl_val "$lsg" LATN)
-	snrd=$(dsl_val "$lsg" SNR)
-
-	lsg=$(dsl_cmd g997lsg 0 1)
-	latnu=$(dsl_val "$lsg" LATN)
-	snru=$(dsl_val "$lsg" SNR)
-
-	[ -z "$latnd" ] && latnd=0
-	[ -z "$latnu" ] && latnu=0
-	[ -z "$snrd" ] && snrd=0
-	[ -z "$snru" ] && snru=0
-
-	latnd=$(dbt $latnd)
-	latnu=$(dbt $latnu)
-	snrd=$(dbt $snrd)
-	snru=$(dbt $snru)
-	
-	if [ "$action" = "lucistat" ]; then
-		echo "dsl.line_attenuation_down=$latnd"
-		echo "dsl.line_attenuation_up=$latnu"
-		echo "dsl.noise_margin_down=$snrd"
-		echo "dsl.noise_margin_up=$snru"
-	else
-		echo "Line Attenuation:	${latnd}dB / ${latnu}dB"
-		echo "Noise Margin:		${snrd}dB / ${snru}dB"
-	fi
-}
-
-#
-# Is the line up? Or what state is it in?
-#
-line_state() {
-	local lsg=$(dsl_cmd lsg)
-	local ls=$(dsl_val "$lsg" nLineState);
-	local s;
-
-	case "$ls" in
-		"0x0")		s="not initialized" ;;
-		"0x1")		s="exception" ;;
-		"0x10")		s="not updated" ;;
-		"0xff")		s="idle request" ;;
-		"0x100")	s="idle" ;;
-		"0x1ff")	s="silent request" ;;
-		"0x200")	s="silent" ;;
-		"0x300")	s="handshake" ;;
-		"0x380")	s="full_init" ;;
-		"0x400")	s="discovery" ;;
-		"0x500")	s="training" ;;
-		"0x600")	s="analysis" ;;
-		"0x700")	s="exchange" ;;
-		"0x800")	s="showtime_no_sync" ;;
-		"0x801")	s="showtime_tc_sync" ;;
-		"0x900")	s="fastretrain" ;;
-		"0xa00")	s="lowpower_l2" ;;
-		"0xb00")	s="loopdiagnostic active" ;;
-		"0xb10")	s="loopdiagnostic data exchange" ;;
-		"0xb20")	s="loopdiagnostic data request" ;;
-		"0xc00")	s="loopdiagnostic complete" ;;
-		"0x1000000")	s="test" ;;
-		"0xd00")	s="resync" ;;
-		"0x3c0")	s="short init entry" ;;
-		"")		s="not running daemon"; ls="0xfff" ;;
-		*)		s="unknown" ;;
-	esac
-
-	if [ $action = "lucistat" ]; then
-		echo "dsl.line_state_num=$ls"
-		echo "dsl.line_state_detail=\"$s\""
-		if [ "$ls" = "0x801" ]; then
-			echo "dsl.line_state=\"UP\""
-		else
-			echo "dsl.line_state=\"DOWN\""
-		fi
-	else
-		if [ "$ls" = "0x801" ]; then
-			echo "Line State:		UP [$ls: $s]"
-		else
-			echo "Line State:		DOWN [$ls: $s]"
-		fi
-	fi
-}
-
-#
-# Main status routine
-#
-status() {
-	chipset
-	line_state
-	data_rates
-	line_data
-	line_uptime
-}
-
-#
-# Luci (lua) compatible version that's easy to parse
-#
-lucistat() {
-	echo "local dsl={}"
-	status
-	echo "return dsl"
-}
-
-
-annex_b=10_00_10_00_00_04_00_00
-annex_bdmt=10_00_00_00_00_00_00_00
-annex_b2=00_00_10_00_00_00_00_00
-annex_b2p=00_00_00_00_00_04_00_00
-annex_a=04_01_04_00_00_01_00_00
-annex_at1=01_00_00_00_00_00_00_00
-annex_alite=00_01_00_00_00_00_00_00
-annex_admt=04_00_00_00_00_00_00_00
-annex_a2=00_00_04_00_00_00_00_00
-annex_a2p=00_00_00_00_00_01_00_00
-annex_l=00_00_00_00_04_00_00_00
-annex_m=00_00_00_00_40_00_04_00
-annex_m2=00_00_00_00_40_00_00_00
-annex_m2p=00_00_00_00_00_00_04_00
-
-#
-# Simple start routine
-#
 start() {
-	local annex
-	local firmware
-	local xtu
+	local firmware xtu
+	
 	config_load network
-	config_get annex wan annex
+	
 	config_get firmware wan firmware
-
-	# get xtu
-	eval "xtu=\"\${annex_$annex}\""
-
-	# check for firmware
 	[ -z "${firmware}" ] &&
 		firmware=vdsl.bin
 
-	# start CPE dsl daemon in the background
-	service_start /sbin/vdsl_cpe_control -i${xtu} \
-			-n /sbin/dsl_notify.sh \
-			-f /lib/firmware/${firmware}
+	config_get xtu wan xtu
+	[ -z "${xtu}" ] &&
+		xtu=10_00_10_00_00_04_01_07
+
+	service_start /sbin/vdsl_cpe_control \
+		-i${xtu} \
+		-T4_0_1
+		-n /sbin/dsl_notify.sh \
+		-f /lib/firmware/${firmware}
 }
 
-#
-# For stop we want to simulate the notification call for when
-# the line goes down, so that we can stop the ppp link before
-# we die.
-#
 stop() {
 	DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
 	DSL_INTERFACE_STATUS="DOWN" \
@@ -308,4 +40,3 @@ stop() {
 
 	service_stop /sbin/vdsl_cpe_control
 }
-

target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh

@@ -0,0 +1,244 @@
+#!/bin/sh /etc/rc.common
+# Copyright (C) 2012 OpenWrt.org
+
+XDSL_CTRL=dsl_cpe_control
+
+#
+# Basic functions to send CLI commands to the vdsl_cpe_control daemon
+#
+dsl_cmd() {
+	killall -0 ${XDSL_CTRL} && (
+		echo "$@" > /tmp/pipe/dsl_cpe0_cmd
+		cat /tmp/pipe/dsl_cpe0_ack
+	)
+}
+dsl_val() {
+	echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
+}
+
+#
+# Simple divide by 10 routine to cope with one decimal place
+#
+dbt() {
+	local a=$(expr $1 / 10)
+	local b=$(expr $1 % 10)
+	echo "${a}.${b}"
+}
+#
+# Take a number and convert to k or meg
+#
+scale() {
+	local val=$1
+	local a
+	local b
+
+	if [ "$val" -gt 1000000 ]; then
+		a=$(expr $val / 1000)
+		b=$(expr $a % 1000)
+		a=$(expr $a / 1000)
+		printf "%d.%03d Mb" ${a} ${b}
+	elif [ "$val" -gt 1000 ]; then
+		a=$(expr $val / 1000)
+		printf "%d Kb" ${a}
+	else
+		echo "${val} b"
+	fi
+}
+
+#
+# Read the data rates for both directions
+#
+data_rates() {
+	local csg
+	local dru
+	local drd
+	local sdru
+	local sdrd
+
+	csg=$(dsl_cmd g997csg 0 1)
+	drd=$(dsl_val "$csg" ActualDataRate)
+
+	csg=$(dsl_cmd g997csg 0 0)
+	dru=$(dsl_val "$csg" ActualDataRate)
+
+	[ -z "$drd" ] && drd=0
+	[ -z "$dru" ] && dru=0
+
+	sdrd=$(scale $drd)
+	sdru=$(scale $dru)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.data_rate_down=$drd"
+		echo "dsl.data_rate_up=$dru"
+		echo "dsl.data_rate_down_s=\"$sdrd\""
+		echo "dsl.data_rate_up_s=\"$sdru\""
+	else
+		echo "Data Rate:		${sdrd}/s / ${sdru}/s"
+	fi
+}
+
+#
+# Chipset
+#
+chipset() {
+	local vig
+	local cs
+	local csv
+
+	vig=$(dsl_cmd vig)
+	cs=$(dsl_val "$vig" DSL_ChipSetType)
+	csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.chipset=\"${cs} ${csv}\""
+	else
+		echo "Chipset:		${cs} ${csv}"
+	fi
+}
+
+#
+# Work out how long the line has been up
+#
+line_uptime() {
+	local ccsg
+	local et
+	local etr
+	local d
+	local h
+	local m
+	local s
+	local rc=""
+
+	ccsg=$(dsl_cmd pmccsg 0 0 0)
+	et=$(dsl_val "$ccsg" nElapsedTime)
+
+	[ -z "$et" ] && et=0
+
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_uptime=${et}"
+		return
+	fi
+
+	d=$(expr $et / 86400)
+	etr=$(expr $et % 86400)
+	h=$(expr $etr / 3600)
+	etr=$(expr $etr % 3600)
+	m=$(expr $etr / 60)
+	s=$(expr $etr % 60)
+
+
+	[ "${d}${h}${m}${s}" -ne 0 ] && rc="${s}s"
+	[ "${d}${h}${m}" -ne 0 ] && rc="${m}m ${rc}"
+	[ "${d}${h}" -ne 0 ] && rc="${h}h ${rc}"
+	[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
+
+	[ -z "$rc" ] && rc="down"
+	echo "Line Uptime:		${rc}"
+}
+
+#
+# Get noise and attenuation figures
+#
+line_data() {
+	local lsg
+	local latnu
+	local latnd
+	local snru
+	local snrd
+
+	lsg=$(dsl_cmd g997lsg 1 1)
+	latnd=$(dsl_val "$lsg" LATN)
+	snrd=$(dsl_val "$lsg" SNR)
+
+	lsg=$(dsl_cmd g997lsg 0 1)
+	latnu=$(dsl_val "$lsg" LATN)
+	snru=$(dsl_val "$lsg" SNR)
+
+	[ -z "$latnd" ] && latnd=0
+	[ -z "$latnu" ] && latnu=0
+	[ -z "$snrd" ] && snrd=0
+	[ -z "$snru" ] && snru=0
+
+	latnd=$(dbt $latnd)
+	latnu=$(dbt $latnu)
+	snrd=$(dbt $snrd)
+	snru=$(dbt $snru)
+	
+	if [ "$action" = "lucistat" ]; then
+		echo "dsl.line_attenuation_down=$latnd"
+		echo "dsl.line_attenuation_up=$latnu"
+		echo "dsl.noise_margin_down=$snrd"
+		echo "dsl.noise_margin_up=$snru"
+	else
+		echo "Line Attenuation:	${latnd}dB / ${latnu}dB"
+		echo "Noise Margin:		${snrd}dB / ${snru}dB"
+	fi
+}
+
+#
+# Is the line up? Or what state is it in?
+#
+line_state() {
+	local lsg=$(dsl_cmd lsg)
+	local ls=$(dsl_val "$lsg" nLineState);
+	local s;
+
+	case "$ls" in
+		"0x0")		s="not initialized" ;;
+		"0x1")		s="exception" ;;
+		"0x10")		s="not updated" ;;
+		"0xff")		s="idle request" ;;
+		"0x100")	s="idle" ;;
+		"0x1ff")	s="silent request" ;;
+		"0x200")	s="silent" ;;
+		"0x300")	s="handshake" ;;
+		"0x380")	s="full_init" ;;
+		"0x400")	s="discovery" ;;
+		"0x500")	s="training" ;;
+		"0x600")	s="analysis" ;;
+		"0x700")	s="exchange" ;;
+		"0x800")	s="showtime_no_sync" ;;
+		"0x801")	s="showtime_tc_sync" ;;
+		"0x900")	s="fastretrain" ;;
+		"0xa00")	s="lowpower_l2" ;;
+		"0xb00")	s="loopdiagnostic active" ;;
+		"0xb10")	s="loopdiagnostic data exchange" ;;
+		"0xb20")	s="loopdiagnostic data request" ;;
+		"0xc00")	s="loopdiagnostic complete" ;;
+		"0x1000000")	s="test" ;;
+		"0xd00")	s="resync" ;;
+		"0x3c0")	s="short init entry" ;;
+		"")		s="not running daemon"; ls="0xfff" ;;
+		*)		s="unknown" ;;
+	esac
+
+	if [ $action = "lucistat" ]; then
+		echo "dsl.line_state_num=$ls"
+		echo "dsl.line_state_detail=\"$s\""
+		if [ "$ls" = "0x801" ]; then
+			echo "dsl.line_state=\"UP\""
+		else
+			echo "dsl.line_state=\"DOWN\""
+		fi
+	else
+		if [ "$ls" = "0x801" ]; then
+			echo "Line State:		UP [$ls: $s]"
+		else
+			echo "Line State:		DOWN [$ls: $s]"
+		fi
+	fi
+}
+
+status() {
+	chipset
+	line_state
+	data_rates
+	line_data
+	line_uptime
+}
+
+lucistat() {
+	echo "local dsl={}"
+	status
+	echo "return dsl"
+}

package/network/config/ltq-vdsl-app/files/dsl_notify.sh → target/linux/lantiq/base-files/sbin/dsl_notify.sh

@@ -16,8 +16,6 @@
 include /lib/network
 scan_interfaces
 
-logger "Found no matching interface for DSL notification ($DSL_INTERFACE_STATUS)"
-
 local default
 config_load system
 config_get default led_adsl default