|
|
@@ -0,0 +1,554 @@
|
|
|
+Index: linux-2.6.25.10/drivers/mmc/host/gpiommc.c
|
|
|
+===================================================================
|
|
|
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
|
++++ linux-2.6.25.10/drivers/mmc/host/gpiommc.c 2008-07-18 22:31:00.000000000 +0200
|
|
|
+@@ -0,0 +1,328 @@
|
|
|
++/*
|
|
|
++ * Driver an MMC/SD card on a bitbanging GPIO SPI bus.
|
|
|
++ * This module hooks up the mmc_spi and spi_gpio modules and also
|
|
|
++ * provides a sysfs interface.
|
|
|
++ *
|
|
|
++ * Copyright 2008 Michael Buesch <[email protected]>
|
|
|
++ *
|
|
|
++ * Licensed under the GNU/GPL. See COPYING for details.
|
|
|
++ */
|
|
|
++
|
|
|
++#include <linux/mmc/gpiommc.h>
|
|
|
++#include <linux/platform_device.h>
|
|
|
++#include <linux/list.h>
|
|
|
++#include <linux/mutex.h>
|
|
|
++#include <linux/spi/spi_gpio.h>
|
|
|
++
|
|
|
++
|
|
|
++#define PFX "gpio-mmc: "
|
|
|
++#define GPIOMMC_MAX_NAMELEN_STR __stringify(GPIOMMC_MAX_NAMELEN)
|
|
|
++
|
|
|
++struct gpiommc_device {
|
|
|
++ struct platform_device *pdev;
|
|
|
++ struct platform_device *spi_pdev;
|
|
|
++ struct spi_board_info boardinfo;
|
|
|
++};
|
|
|
++
|
|
|
++
|
|
|
++MODULE_DESCRIPTION("GPIO based MMC driver");
|
|
|
++MODULE_AUTHOR("Michael Buesch");
|
|
|
++MODULE_LICENSE("GPL");
|
|
|
++
|
|
|
++
|
|
|
++static int gpiommc_boardinfo_setup(struct spi_board_info *bi,
|
|
|
++ struct spi_master *master,
|
|
|
++ void *data)
|
|
|
++{
|
|
|
++ struct gpiommc_device *d = data;
|
|
|
++ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
|
|
|
++
|
|
|
++ /* Bind the SPI master to the MMC-SPI host driver. */
|
|
|
++ strlcpy(bi->modalias, "mmc_spi", sizeof(bi->modalias));
|
|
|
++
|
|
|
++ bi->max_speed_hz = pdata->max_bus_speed;
|
|
|
++ bi->bus_num = master->bus_num;
|
|
|
++ bi->mode = pdata->mode;
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
++static int gpiommc_probe(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct gpiommc_platform_data *mmc_pdata = pdev->dev.platform_data;
|
|
|
++ struct spi_gpio_platform_data spi_pdata;
|
|
|
++ struct gpiommc_device *d;
|
|
|
++ int err;
|
|
|
++
|
|
|
++ err = -ENXIO;
|
|
|
++ if (!mmc_pdata)
|
|
|
++ goto error;
|
|
|
++
|
|
|
++ /* Allocate the GPIO-MMC device */
|
|
|
++ err = -ENOMEM;
|
|
|
++ d = kzalloc(sizeof(*d), GFP_KERNEL);
|
|
|
++ if (!d)
|
|
|
++ goto error;
|
|
|
++ d->pdev = pdev;
|
|
|
++
|
|
|
++ /* Create the SPI-GPIO device */
|
|
|
++ d->spi_pdev = platform_device_alloc(SPI_GPIO_PLATDEV_NAME,
|
|
|
++ spi_gpio_next_id());
|
|
|
++ if (!d->spi_pdev)
|
|
|
++ goto err_free_d;
|
|
|
++
|
|
|
++ memset(&spi_pdata, 0, sizeof(spi_pdata));
|
|
|
++ spi_pdata.pin_clk = mmc_pdata->pins.gpio_clk;
|
|
|
++ spi_pdata.pin_miso = mmc_pdata->pins.gpio_do;
|
|
|
++ spi_pdata.pin_mosi = mmc_pdata->pins.gpio_di;
|
|
|
++ spi_pdata.pin_cs = mmc_pdata->pins.gpio_cs;
|
|
|
++ spi_pdata.cs_activelow = mmc_pdata->pins.cs_activelow;
|
|
|
++ spi_pdata.no_spi_delay = mmc_pdata->no_spi_delay;
|
|
|
++ spi_pdata.boardinfo_setup = gpiommc_boardinfo_setup;
|
|
|
++ spi_pdata.boardinfo_setup_data = d;
|
|
|
++
|
|
|
++ err = platform_device_add_data(d->spi_pdev, &spi_pdata,
|
|
|
++ sizeof(spi_pdata));
|
|
|
++ if (err)
|
|
|
++ goto err_free_pdev;
|
|
|
++ err = platform_device_add(d->spi_pdev);
|
|
|
++ if (err)
|
|
|
++ goto err_free_pdata;
|
|
|
++ platform_set_drvdata(pdev, d);
|
|
|
++
|
|
|
++ printk(KERN_INFO PFX "MMC-Card \"%s\" "
|
|
|
++ "attached to GPIO pins di=%u, do=%u, clk=%u, cs=%u\n",
|
|
|
++ mmc_pdata->name, mmc_pdata->pins.gpio_di,
|
|
|
++ mmc_pdata->pins.gpio_do,
|
|
|
++ mmc_pdata->pins.gpio_clk,
|
|
|
++ mmc_pdata->pins.gpio_cs);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++
|
|
|
++err_free_pdata:
|
|
|
++ kfree(d->spi_pdev->dev.platform_data);
|
|
|
++ d->spi_pdev->dev.platform_data = NULL;
|
|
|
++err_free_pdev:
|
|
|
++ platform_device_put(d->spi_pdev);
|
|
|
++err_free_d:
|
|
|
++ kfree(d);
|
|
|
++error:
|
|
|
++ return err;
|
|
|
++}
|
|
|
++
|
|
|
++static int gpiommc_remove(struct platform_device *pdev)
|
|
|
++{
|
|
|
++ struct gpiommc_device *d = platform_get_drvdata(pdev);
|
|
|
++ struct gpiommc_platform_data *pdata = d->pdev->dev.platform_data;
|
|
|
++
|
|
|
++ platform_device_unregister(d->spi_pdev);
|
|
|
++ printk(KERN_INFO PFX "GPIO based MMC-Card \"%s\" removed\n", pdata->name);
|
|
|
++ platform_device_put(d->spi_pdev);
|
|
|
++
|
|
|
++ return 0;
|
|
|
++}
|
|
|
++
|
|
|
++/* Wrapper for the platform data with context data for the sysfs interface. */
|
|
|
++struct gpiommc_sysfs_platform_data {
|
|
|
++ struct gpiommc_platform_data p; /* Keep as first element */
|
|
|
++
|
|
|
++ /* The platform device that we allocated. */
|
|
|
++ struct platform_device *pdev;
|
|
|
++ /* gpiommc_sysfs_list */
|
|
|
++ struct list_head list;
|
|
|
++};
|
|
|
++
|
|
|
++static LIST_HEAD(gpiommc_sysfs_list);
|
|
|
++static DEFINE_MUTEX(gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++static struct gpiommc_sysfs_platform_data *gpiommc_sysfs_find_dev(const char *name)
|
|
|
++{
|
|
|
++ struct gpiommc_sysfs_platform_data *pdata;
|
|
|
++
|
|
|
++ list_for_each_entry(pdata, &gpiommc_sysfs_list, list) {
|
|
|
++ if (strcmp(pdata->p.name, name) == 0)
|
|
|
++ return pdata;
|
|
|
++ }
|
|
|
++
|
|
|
++ return NULL;
|
|
|
++}
|
|
|
++
|
|
|
++static ssize_t gpiommc_add_store(struct device_driver *drv,
|
|
|
++ const char *buf, size_t count)
|
|
|
++{
|
|
|
++ int res, err;
|
|
|
++ struct gpiommc_sysfs_platform_data pdata_local, *pdata;
|
|
|
++ struct platform_device *pdev;
|
|
|
++ unsigned int no_spi_delay = 0, mode = 0, csactivelow = 0;
|
|
|
++
|
|
|
++ mutex_lock(&gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++ pdata = &pdata_local;
|
|
|
++ memset(pdata, 0, sizeof(*pdata));
|
|
|
++
|
|
|
++ err = -EINVAL;
|
|
|
++ res = sscanf(buf, "%" GPIOMMC_MAX_NAMELEN_STR "s %u %u %u %u %u %u %u %u",
|
|
|
++ pdata->p.name,
|
|
|
++ &pdata->p.pins.gpio_di,
|
|
|
++ &pdata->p.pins.gpio_do,
|
|
|
++ &pdata->p.pins.gpio_clk,
|
|
|
++ &pdata->p.pins.gpio_cs,
|
|
|
++ &mode,
|
|
|
++ &pdata->p.max_bus_speed,
|
|
|
++ &no_spi_delay,
|
|
|
++ &csactivelow);
|
|
|
++ pdata->p.mode = mode;
|
|
|
++ pdata->p.no_spi_delay = !!no_spi_delay;
|
|
|
++ pdata->p.pins.cs_activelow = !!csactivelow;
|
|
|
++ if (res < 9)
|
|
|
++ pdata->p.pins.cs_activelow = 1; /* Default: CS = activelow */
|
|
|
++ if (res < 8)
|
|
|
++ pdata->p.no_spi_delay = 0; /* Default: Delay turned on */
|
|
|
++ if (res < 7)
|
|
|
++ pdata->p.max_bus_speed = 5000000; /* Default: 5Mhz */
|
|
|
++ if (res < 6)
|
|
|
++ pdata->p.mode = 0; /* Default: SPI mode 0 */
|
|
|
++ if (res < 5 || res > 9)
|
|
|
++ goto out; /* First 5 args are mandatory. */
|
|
|
++
|
|
|
++ /* Convert mode so that the SPI subsystem does understand it. */
|
|
|
++ switch (pdata->p.mode) {
|
|
|
++ case 0:
|
|
|
++ pdata->p.mode = SPI_MODE_0;
|
|
|
++ break;
|
|
|
++ case 1:
|
|
|
++ pdata->p.mode = SPI_MODE_1;
|
|
|
++ break;
|
|
|
++ case 2:
|
|
|
++ pdata->p.mode = SPI_MODE_2;
|
|
|
++ break;
|
|
|
++ case 3:
|
|
|
++ pdata->p.mode = SPI_MODE_3;
|
|
|
++ break;
|
|
|
++ default:
|
|
|
++ goto out; /* Invalid mode */
|
|
|
++ }
|
|
|
++
|
|
|
++ err = -EEXIST;
|
|
|
++ if (gpiommc_sysfs_find_dev(pdata->p.name))
|
|
|
++ goto out;
|
|
|
++
|
|
|
++ err = -ENOMEM;
|
|
|
++ pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
|
|
|
++ if (!pdev)
|
|
|
++ goto out;
|
|
|
++
|
|
|
++ err = platform_device_add_data(pdev, pdata, sizeof(*pdata));
|
|
|
++ if (err)
|
|
|
++ goto err_free_pdev;
|
|
|
++ pdata = pdev->dev.platform_data;
|
|
|
++
|
|
|
++ err = platform_device_add(pdev);
|
|
|
++ if (err)
|
|
|
++ goto err_free_pdev;
|
|
|
++
|
|
|
++ pdata->pdev = pdev;
|
|
|
++ INIT_LIST_HEAD(&pdata->list);
|
|
|
++ list_add(&pdata->list, &gpiommc_sysfs_list);
|
|
|
++
|
|
|
++ err = 0;
|
|
|
++out:
|
|
|
++ mutex_unlock(&gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++ return err ? err : count;
|
|
|
++
|
|
|
++err_free_pdev:
|
|
|
++ platform_device_put(pdev);
|
|
|
++ goto out;
|
|
|
++}
|
|
|
++
|
|
|
++static ssize_t gpiommc_remove_store(struct device_driver *drv,
|
|
|
++ const char *buf, size_t count)
|
|
|
++{
|
|
|
++ struct gpiommc_sysfs_platform_data *pdata;
|
|
|
++ int err;
|
|
|
++
|
|
|
++ mutex_lock(&gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++ err = -ENODEV;
|
|
|
++ pdata = gpiommc_sysfs_find_dev(buf);
|
|
|
++ if (!pdata)
|
|
|
++ goto out;
|
|
|
++
|
|
|
++ list_del(&pdata->list);
|
|
|
++ platform_device_unregister(pdata->pdev);
|
|
|
++
|
|
|
++out:
|
|
|
++ mutex_unlock(&gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++ return err ? err : count;
|
|
|
++}
|
|
|
++
|
|
|
++static DRIVER_ATTR(add, 0200,
|
|
|
++ NULL, gpiommc_add_store);
|
|
|
++static DRIVER_ATTR(remove, 0200,
|
|
|
++ NULL, gpiommc_remove_store);
|
|
|
++
|
|
|
++static struct platform_driver gpiommc_plat_driver = {
|
|
|
++ .probe = gpiommc_probe,
|
|
|
++ .remove = gpiommc_remove,
|
|
|
++ .driver = {
|
|
|
++ .name = GPIOMMC_PLATDEV_NAME,
|
|
|
++ .owner = THIS_MODULE,
|
|
|
++ },
|
|
|
++};
|
|
|
++
|
|
|
++int gpiommc_next_id(void)
|
|
|
++{
|
|
|
++ static atomic_t counter = ATOMIC_INIT(-1);
|
|
|
++
|
|
|
++ return atomic_inc_return(&counter);
|
|
|
++}
|
|
|
++EXPORT_SYMBOL(gpiommc_next_id);
|
|
|
++
|
|
|
++static int __init gpiommc_modinit(void)
|
|
|
++{
|
|
|
++ int err;
|
|
|
++
|
|
|
++ err = platform_driver_register(&gpiommc_plat_driver);
|
|
|
++ if (err)
|
|
|
++ return err;
|
|
|
++ err = driver_create_file(&gpiommc_plat_driver.driver,
|
|
|
++ &driver_attr_add);
|
|
|
++ if (err)
|
|
|
++ goto err_drv_unreg;
|
|
|
++ err = driver_create_file(&gpiommc_plat_driver.driver,
|
|
|
++ &driver_attr_remove);
|
|
|
++ if (err)
|
|
|
++ goto err_remove_add;
|
|
|
++
|
|
|
++ return 0;
|
|
|
++
|
|
|
++err_remove_add:
|
|
|
++ driver_remove_file(&gpiommc_plat_driver.driver,
|
|
|
++ &driver_attr_add);
|
|
|
++err_drv_unreg:
|
|
|
++ platform_driver_unregister(&gpiommc_plat_driver);
|
|
|
++ return err;
|
|
|
++}
|
|
|
++module_init(gpiommc_modinit);
|
|
|
++
|
|
|
++static void __exit gpiommc_modexit(void)
|
|
|
++{
|
|
|
++ struct gpiommc_sysfs_platform_data *pdata, *pdata_tmp;
|
|
|
++
|
|
|
++ driver_remove_file(&gpiommc_plat_driver.driver,
|
|
|
++ &driver_attr_remove);
|
|
|
++ driver_remove_file(&gpiommc_plat_driver.driver,
|
|
|
++ &driver_attr_add);
|
|
|
++
|
|
|
++ mutex_lock(&gpiommc_sysfs_mutex);
|
|
|
++ list_for_each_entry_safe(pdata, pdata_tmp, &gpiommc_sysfs_list, list) {
|
|
|
++ list_del(&pdata->list);
|
|
|
++ platform_device_unregister(pdata->pdev);
|
|
|
++ }
|
|
|
++ mutex_unlock(&gpiommc_sysfs_mutex);
|
|
|
++
|
|
|
++ platform_driver_unregister(&gpiommc_plat_driver);
|
|
|
++}
|
|
|
++module_exit(gpiommc_modexit);
|
|
|
+Index: linux-2.6.25.10/drivers/mmc/host/Kconfig
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.25.10.orig/drivers/mmc/host/Kconfig 2008-07-18 22:30:36.000000000 +0200
|
|
|
++++ linux-2.6.25.10/drivers/mmc/host/Kconfig 2008-07-18 22:31:00.000000000 +0200
|
|
|
+@@ -130,3 +130,23 @@ config MMC_SPI
|
|
|
+
|
|
|
+ If unsure, or if your system has no SPI master driver, say N.
|
|
|
+
|
|
|
++config GPIOMMC
|
|
|
++ tristate "MMC/SD over GPIO-based SPI"
|
|
|
++ depends on MMC && MMC_SPI && SPI_GPIO
|
|
|
++ help
|
|
|
++ This driver hooks up the mmc_spi and spi_gpio modules so that
|
|
|
++ MMC/SD cards can be used on a GPIO based bus by bitbanging
|
|
|
++ the SPI protocol in software.
|
|
|
++
|
|
|
++ This driver provides a sysfs interface to dynamically create
|
|
|
++ and destroy GPIO-based MMC/SD card interfaces. It also provides
|
|
|
++ a platform device interface API.
|
|
|
++ See Documentation/gpiommc.txt for details.
|
|
|
++
|
|
|
++ The module will be called gpiommc.
|
|
|
++
|
|
|
++ If unsure, say N.
|
|
|
++
|
|
|
++config MMC_S3C
|
|
|
++ tristate "Samsung S3C SD/MMC Card Interface support"
|
|
|
++ depends on ARCH_S3C2410 && MMC
|
|
|
+Index: linux-2.6.25.10/drivers/mmc/host/Makefile
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.25.10.orig/drivers/mmc/host/Makefile 2008-07-18 22:30:36.000000000 +0200
|
|
|
++++ linux-2.6.25.10/drivers/mmc/host/Makefile 2008-07-18 22:31:20.000000000 +0200
|
|
|
+@@ -18,3 +18,4 @@ obj-$(CONFIG_MMC_AT91) += at91_mci.o
|
|
|
+ obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o
|
|
|
+ obj-$(CONFIG_MMC_SPI) += mmc_spi.o
|
|
|
+
|
|
|
++obj-$(CONFIG_GPIOMMC) += gpiommc.o
|
|
|
+Index: linux-2.6.25.10/include/linux/mmc/gpiommc.h
|
|
|
+===================================================================
|
|
|
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
|
++++ linux-2.6.25.10/include/linux/mmc/gpiommc.h 2008-07-18 22:31:00.000000000 +0200
|
|
|
+@@ -0,0 +1,62 @@
|
|
|
++/*
|
|
|
++ * Device driver for MMC/SD cards driven over a GPIO bus.
|
|
|
++ *
|
|
|
++ * Copyright (c) 2008 Michael Buesch
|
|
|
++ *
|
|
|
++ * Licensed under the GNU/GPL version 2.
|
|
|
++ */
|
|
|
++#ifndef LINUX_GPIOMMC_H_
|
|
|
++#define LINUX_GPIOMMC_H_
|
|
|
++
|
|
|
++#include <linux/types.h>
|
|
|
++
|
|
|
++
|
|
|
++#define GPIOMMC_MAX_NAMELEN 15
|
|
|
++
|
|
|
++/** struct gpiommc_pins - Hardware pin assignments
|
|
|
++ * @gpio_di: The GPIO number of the DATA IN pin
|
|
|
++ * @gpio_do: The GPIO number of the DATA OUT pin
|
|
|
++ * @gpio_clk: The GPIO number of the CLOCK pin
|
|
|
++ * @gpio_cs: The GPIO number of the CHIPSELECT pin
|
|
|
++ * @cs_activelow: If true, the chip is considered selected if @gpio_cs is low.
|
|
|
++ */
|
|
|
++struct gpiommc_pins {
|
|
|
++ unsigned int gpio_di;
|
|
|
++ unsigned int gpio_do;
|
|
|
++ unsigned int gpio_clk;
|
|
|
++ unsigned int gpio_cs;
|
|
|
++ bool cs_activelow;
|
|
|
++};
|
|
|
++
|
|
|
++/** struct gpiommc_platform_data - Platform data for a MMC-over-SPI-GPIO device.
|
|
|
++ * @name: The unique name string of the device.
|
|
|
++ * @pins: The hardware pin assignments.
|
|
|
++ * @mode: The hardware mode. This is either SPI_MODE_0,
|
|
|
++ * SPI_MODE_1, SPI_MODE_2 or SPI_MODE_3. See the SPI documentation.
|
|
|
++ * @no_spi_delay: Do not use delays in the lowlevel SPI bitbanging code.
|
|
|
++ * This is not standards compliant, but may be required for some
|
|
|
++ * embedded machines to gain reasonable speed.
|
|
|
++ * @max_bus_speed: The maximum speed of the SPI bus, in Hertz.
|
|
|
++ */
|
|
|
++struct gpiommc_platform_data {
|
|
|
++ char name[GPIOMMC_MAX_NAMELEN + 1];
|
|
|
++ struct gpiommc_pins pins;
|
|
|
++ u8 mode;
|
|
|
++ bool no_spi_delay;
|
|
|
++ unsigned int max_bus_speed;
|
|
|
++};
|
|
|
++
|
|
|
++/** GPIOMMC_PLATDEV_NAME - The platform device name string.
|
|
|
++ * The name string that has to be used for platform_device_alloc
|
|
|
++ * when allocating a gpiommc device.
|
|
|
++ */
|
|
|
++#define GPIOMMC_PLATDEV_NAME "gpiommc"
|
|
|
++
|
|
|
++/** gpiommc_next_id - Get another platform device ID number.
|
|
|
++ * This returns the next platform device ID number that has to be used
|
|
|
++ * for platform_device_alloc. The ID is opaque and should not be used for
|
|
|
++ * anything else.
|
|
|
++ */
|
|
|
++int gpiommc_next_id(void);
|
|
|
++
|
|
|
++#endif /* LINUX_GPIOMMC_H_ */
|
|
|
+Index: linux-2.6.25.10/Documentation/gpiommc.txt
|
|
|
+===================================================================
|
|
|
+--- /dev/null 1970-01-01 00:00:00.000000000 +0000
|
|
|
++++ linux-2.6.25.10/Documentation/gpiommc.txt 2008-07-18 22:31:00.000000000 +0200
|
|
|
+@@ -0,0 +1,96 @@
|
|
|
++GPIOMMC - Driver for an MMC/SD card on a bitbanging GPIO SPI bus
|
|
|
++================================================================
|
|
|
++
|
|
|
++The gpiommc module hooks up the mmc_spi and spi_gpio modules for running an
|
|
|
++MMC or SD card on GPIO pins.
|
|
|
++
|
|
|
++Two interfaces for registering a new MMC/SD card device are provided.
|
|
|
++A static platform-device based mechanism and a dynamic sysfs based interface.
|
|
|
++
|
|
|
++
|
|
|
++Registering devices via platform-device
|
|
|
++=======================================
|
|
|
++
|
|
|
++The platform-device interface is used for registering MMC/SD devices that are
|
|
|
++part of the hardware platform. This is most useful only for embedded machines
|
|
|
++with MMC/SD devices statically connected to the platform GPIO bus.
|
|
|
++
|
|
|
++The data structures are declared in <linux/mmc/gpiommc.h>
|
|
|
++
|
|
|
++To register a new device, define an instance of struct gpiommc_platform_data.
|
|
|
++This structure holds any information about how the device is hooked up to the
|
|
|
++GPIO pins and what hardware modes the device supports. See the docbook-style
|
|
|
++documentation in the header file for more information on the struct fields.
|
|
|
++
|
|
|
++Then allocate a new instance of a platform device by doing:
|
|
|
++
|
|
|
++ pdev = platform_device_alloc(GPIOMMC_PLATDEV_NAME, gpiommc_next_id());
|
|
|
++
|
|
|
++This will allocate the platform device data structures and hook it up to the
|
|
|
++gpiommc driver.
|
|
|
++Then add the gpiommc_platform_data to the platform device.
|
|
|
++
|
|
|
++ err = platform_device_add_data(pdev, pdata, sizeof(struct gpiommc_platform_data));
|
|
|
++
|
|
|
++You may free the local instance of struct gpiommc_platform_data now.
|
|
|
++Now simply register the platform device.
|
|
|
++
|
|
|
++ err = platform_device_add(pdev);
|
|
|
++
|
|
|
++Done. The gpiommc probe routine should be called and you should see a dmesg
|
|
|
++message for the added device.
|
|
|
++
|
|
|
++
|
|
|
++Registering devices via sysfs
|
|
|
++=============================
|
|
|
++
|
|
|
++MMC/SD cards connected via GPIO often are a pretty dynamic thing. For example
|
|
|
++selfmade hacks for soldering an MMC/SD card to standard GPIO pins on embedded
|
|
|
++hardware are a common situation.
|
|
|
++So we provide a dynamic interface to conveniently handle adding and removing
|
|
|
++devices from userspace, without the need to recompile the kernel.
|
|
|
++
|
|
|
++There are two sysfs files responsible for that:
|
|
|
++export ADD=/sys/bus/platform/drivers/gpiommc/add
|
|
|
++export REMOVE=/sys/bus/platform/drivers/gpiommc/remove
|
|
|
++
|
|
|
++To add a new device, simply echo the configuration string to the "add" file.
|
|
|
++The config string is composed out of the following elements:
|
|
|
++
|
|
|
++DEVNAME DIpin DOpin CLKpin CSpin SPIMODE MAXBUSSPEED NO_SPI_DELAY CSACTIVELOW
|
|
|
++
|
|
|
++DEVNAME is a unique name string for the device.
|
|
|
++DIpin is the SPI DI GPIO pin.
|
|
|
++DOpin is the SPI DO GPIO pin.
|
|
|
++CLKpin is the SPI CLOCK GPIO pin.
|
|
|
++CSpin is the SPI CHIPSELECT GPIO pin.
|
|
|
++SPIMODE is the hardware mode the device will run at. Can be 0-3.
|
|
|
++MAXBUSSPEED is the maximum bus speed in Hertz.
|
|
|
++NO_SPI_DELAY can be 1 or 0. If it is 1, then the lowlevel SPI delay
|
|
|
++will not be performed. This is not standards compliant, but may be required
|
|
|
++to gain reasonable speeds on embedded hardware.
|
|
|
++CSACTIVELOW can be 1 or 0. If it is 1, the chip is considered to be selected, if CS
|
|
|
++is at a logical 0.
|
|
|
++
|
|
|
++Note that the elements SPIMODE, MAXBUSSPEED and NO_SPI_DELAY are optional
|
|
|
++and can be omitted.
|
|
|
++SPIMODE will default to 0.
|
|
|
++MAXBUSSSPEED will default to 5Mhz.
|
|
|
++NO_SPI_DELAY will default to 0.
|
|
|
++CSACTIVELOW will default to 1.
|
|
|
++
|
|
|
++Example:
|
|
|
++
|
|
|
++ echo -n "my_device 5 4 3 7 0 1000000 1" > $ADD
|
|
|
++
|
|
|
++This will add a new device called "my_device" with the GPIO pins assigned as
|
|
|
++DI=5, DO=4, CLK=3, CS=7
|
|
|
++The hardware mode will be SPI_MODE_0.
|
|
|
++The maximum bus speed will be 1000000 Hz (1Mhz)
|
|
|
++And the explicit SPI delay at the lowlevel bitbang loop will be switched off.
|
|
|
++
|
|
|
++To remove a device, simply echo the device name string to the "remove" file.
|
|
|
++
|
|
|
++Example:
|
|
|
++
|
|
|
++ echo -n "my_device" > $REMOVE
|
|
|
+Index: linux-2.6.25.10/MAINTAINERS
|
|
|
+===================================================================
|
|
|
+--- linux-2.6.25.10.orig/MAINTAINERS 2008-07-18 22:30:41.000000000 +0200
|
|
|
++++ linux-2.6.25.10/MAINTAINERS 2008-07-18 22:31:00.000000000 +0200
|
|
|
+@@ -1736,6 +1736,11 @@ L: [email protected].
|
|
|
+ W: http://gigaset307x.sourceforge.net/
|
|
|
+ S: Maintained
|
|
|
+
|
|
|
++GPIOMMC DRIVER
|
|
|
++P: Michael Buesch
|
|
|
++M: [email protected]
|
|
|
++S: Maintained
|
|
|
++
|
|
|
+ HARDWARE MONITORING
|
|
|
+ P: Mark M. Hoffman
|
|
|
+ M: [email protected]
|
Michael Büsch