|
@@ -14,96 +14,14 @@
|
|
|
led-failsafe = &power;
|
|
|
led-running = &power;
|
|
|
|
|
|
- led-usb = &usb1;
|
|
|
- led-usb2 = &usb2;
|
|
|
+ led-usb = &led_usb1;
|
|
|
+ led-usb2 = &led_usb2;
|
|
|
};
|
|
|
|
|
|
memory@0 {
|
|
|
reg = <0x0 0x4000000>;
|
|
|
};
|
|
|
|
|
|
- fpi@10000000 {
|
|
|
- gpio: pinmux@E100B10 {
|
|
|
- pinctrl-names = "default";
|
|
|
- pinctrl-0 = <&state_default>;
|
|
|
-
|
|
|
- state_default: pinmux {
|
|
|
- exin3 {
|
|
|
- lantiq,groups = "exin3";
|
|
|
- lantiq,function = "exin";
|
|
|
- };
|
|
|
- stp {
|
|
|
- lantiq,groups = "stp";
|
|
|
- lantiq,function = "stp";
|
|
|
- };
|
|
|
- nand {
|
|
|
- lantiq,groups = "nand cle", "nand ale",
|
|
|
- "nand rd", "nand rdy";
|
|
|
- lantiq,function = "ebu";
|
|
|
- };
|
|
|
- mdio {
|
|
|
- lantiq,groups = "mdio";
|
|
|
- lantiq,function = "mdio";
|
|
|
- };
|
|
|
- pci {
|
|
|
- lantiq,groups = "gnt1", "req1";
|
|
|
- lantiq,function = "pci";
|
|
|
- };
|
|
|
- conf_out {
|
|
|
- lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
|
|
|
- "io4", "io5", "io6", /* stp */
|
|
|
- "io21",
|
|
|
- "io33";
|
|
|
- lantiq,open-drain;
|
|
|
- lantiq,pull = <0>;
|
|
|
- lantiq,output = <1>;
|
|
|
- };
|
|
|
- pcie-rst {
|
|
|
- lantiq,pins = "io38";
|
|
|
- lantiq,pull = <0>;
|
|
|
- lantiq,output = <1>;
|
|
|
- };
|
|
|
- conf_in {
|
|
|
- lantiq,pins = "io39", /* exin3 */
|
|
|
- "io48"; /* nand rdy */
|
|
|
- lantiq,pull = <2>;
|
|
|
- };
|
|
|
- };
|
|
|
- pins_spi_default: pins_spi_default {
|
|
|
- spi_in {
|
|
|
- lantiq,groups = "spi_di";
|
|
|
- lantiq,function = "spi";
|
|
|
- };
|
|
|
- spi_out {
|
|
|
- lantiq,groups = "spi_do", "spi_clk",
|
|
|
- "spi_cs4";
|
|
|
- lantiq,function = "spi";
|
|
|
- lantiq,output = <1>;
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
- stp: stp@E100BB0 {
|
|
|
- compatible = "lantiq,gpio-stp-xway";
|
|
|
- reg = <0xE100BB0 0x40>;
|
|
|
- #gpio-cells = <2>;
|
|
|
- gpio-controller;
|
|
|
-
|
|
|
- lantiq,shadow = <0xffff>;
|
|
|
- lantiq,groups = <0x7>;
|
|
|
- lantiq,dsl = <0x3>;
|
|
|
- lantiq,phy1 = <0x7>;
|
|
|
- lantiq,phy2 = <0x7>;
|
|
|
- /* lantiq,rising; */
|
|
|
- };
|
|
|
-
|
|
|
- ifxhcd@E101000 {
|
|
|
- status = "okay";
|
|
|
- gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
|
|
|
- lantiq,portmask = <0x3>;
|
|
|
- };
|
|
|
- };
|
|
|
-
|
|
|
gphy-xrx200 {
|
|
|
compatible = "lantiq,phy-xrx200";
|
|
|
firmware1 = "lantiq/xrx200_phy11g_a14.bin";
|
|
@@ -152,11 +70,11 @@
|
|
|
label = "easy80920:green:fxo";
|
|
|
gpios = <&stp 19 GPIO_ACTIVE_HIGH>;
|
|
|
};
|
|
|
- usb1: usb1 {
|
|
|
+ led_usb1: usb1 {
|
|
|
label = "easy80920:green:usb1";
|
|
|
gpios = <&stp 18 GPIO_ACTIVE_HIGH>;
|
|
|
};
|
|
|
- usb2: usb2 {
|
|
|
+ led_usb2: usb2 {
|
|
|
label = "easy80920:green:usb2";
|
|
|
gpios = <&stp 15 GPIO_ACTIVE_HIGH>;
|
|
|
};
|
|
@@ -171,56 +89,6 @@
|
|
|
};
|
|
|
};
|
|
|
|
|
|
-&spi {
|
|
|
- pinctrl-names = "default";
|
|
|
- pinctrl-0 = <&pins_spi_default>;
|
|
|
-
|
|
|
- status = "ok";
|
|
|
-
|
|
|
- m25p80@4 {
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <1>;
|
|
|
- compatible = "jedec,spi-nor";
|
|
|
- reg = <4 0>;
|
|
|
- spi-max-frequency = <1000000>;
|
|
|
-
|
|
|
- partitions {
|
|
|
- compatible = "fixed-partitions";
|
|
|
- #address-cells = <1>;
|
|
|
- #size-cells = <1>;
|
|
|
-
|
|
|
- partition@0 {
|
|
|
- reg = <0x0 0x20000>;
|
|
|
- label = "SPI (RO) U-Boot Image";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@20000 {
|
|
|
- reg = <0x20000 0x10000>;
|
|
|
- label = "ENV_MAC";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@30000 {
|
|
|
- reg = <0x30000 0x10000>;
|
|
|
- label = "DPF";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@40000 {
|
|
|
- reg = <0x40000 0x10000>;
|
|
|
- label = "NVRAM";
|
|
|
- read-only;
|
|
|
- };
|
|
|
-
|
|
|
- partition@500000 {
|
|
|
- reg = <0x50000 0x003a0000>;
|
|
|
- label = "kernel";
|
|
|
- };
|
|
|
- };
|
|
|
- };
|
|
|
-};
|
|
|
-
|
|
|
ð0 {
|
|
|
lan: interface@0 {
|
|
|
compatible = "lantiq,xrx200-pdi";
|
|
@@ -274,6 +142,8 @@
|
|
|
#address-cells = <1>;
|
|
|
#size-cells = <0>;
|
|
|
compatible = "lantiq,xrx200-mdio";
|
|
|
+ reg = <0>;
|
|
|
+
|
|
|
phy0: ethernet-phy@0 {
|
|
|
reg = <0x0>;
|
|
|
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
|
|
@@ -296,3 +166,130 @@
|
|
|
};
|
|
|
};
|
|
|
};
|
|
|
+
|
|
|
+&gpio {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&state_default>;
|
|
|
+
|
|
|
+ state_default: pinmux {
|
|
|
+ exin3 {
|
|
|
+ lantiq,groups = "exin3";
|
|
|
+ lantiq,function = "exin";
|
|
|
+ };
|
|
|
+ stp {
|
|
|
+ lantiq,groups = "stp";
|
|
|
+ lantiq,function = "stp";
|
|
|
+ };
|
|
|
+ nand {
|
|
|
+ lantiq,groups = "nand cle", "nand ale",
|
|
|
+ "nand rd", "nand rdy";
|
|
|
+ lantiq,function = "ebu";
|
|
|
+ };
|
|
|
+ mdio {
|
|
|
+ lantiq,groups = "mdio";
|
|
|
+ lantiq,function = "mdio";
|
|
|
+ };
|
|
|
+ pci {
|
|
|
+ lantiq,groups = "gnt1", "req1";
|
|
|
+ lantiq,function = "pci";
|
|
|
+ };
|
|
|
+ conf_out {
|
|
|
+ lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */
|
|
|
+ "io4", "io5", "io6", /* stp */
|
|
|
+ "io21",
|
|
|
+ "io33";
|
|
|
+ lantiq,open-drain;
|
|
|
+ lantiq,pull = <0>;
|
|
|
+ lantiq,output = <1>;
|
|
|
+ };
|
|
|
+ pcie-rst {
|
|
|
+ lantiq,pins = "io38";
|
|
|
+ lantiq,pull = <0>;
|
|
|
+ lantiq,output = <1>;
|
|
|
+ };
|
|
|
+ conf_in {
|
|
|
+ lantiq,pins = "io39", /* exin3 */
|
|
|
+ "io48"; /* nand rdy */
|
|
|
+ lantiq,pull = <2>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+ pins_spi_default: pins_spi_default {
|
|
|
+ spi_in {
|
|
|
+ lantiq,groups = "spi_di";
|
|
|
+ lantiq,function = "spi";
|
|
|
+ };
|
|
|
+ spi_out {
|
|
|
+ lantiq,groups = "spi_do", "spi_clk",
|
|
|
+ "spi_cs4";
|
|
|
+ lantiq,function = "spi";
|
|
|
+ lantiq,output = <1>;
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&spi {
|
|
|
+ pinctrl-names = "default";
|
|
|
+ pinctrl-0 = <&pins_spi_default>;
|
|
|
+
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ m25p80@4 {
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+ compatible = "jedec,spi-nor";
|
|
|
+ reg = <4 0>;
|
|
|
+ spi-max-frequency = <1000000>;
|
|
|
+
|
|
|
+ partitions {
|
|
|
+ compatible = "fixed-partitions";
|
|
|
+ #address-cells = <1>;
|
|
|
+ #size-cells = <1>;
|
|
|
+
|
|
|
+ partition@0 {
|
|
|
+ reg = <0x0 0x20000>;
|
|
|
+ label = "SPI (RO) U-Boot Image";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@20000 {
|
|
|
+ reg = <0x20000 0x10000>;
|
|
|
+ label = "ENV_MAC";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@30000 {
|
|
|
+ reg = <0x30000 0x10000>;
|
|
|
+ label = "DPF";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@40000 {
|
|
|
+ reg = <0x40000 0x10000>;
|
|
|
+ label = "NVRAM";
|
|
|
+ read-only;
|
|
|
+ };
|
|
|
+
|
|
|
+ partition@500000 {
|
|
|
+ reg = <0x50000 0x003a0000>;
|
|
|
+ label = "kernel";
|
|
|
+ };
|
|
|
+ };
|
|
|
+ };
|
|
|
+};
|
|
|
+
|
|
|
+&stp {
|
|
|
+ status = "okay";
|
|
|
+
|
|
|
+ lantiq,shadow = <0xffff>;
|
|
|
+ lantiq,groups = <0x7>;
|
|
|
+ lantiq,dsl = <0x3>;
|
|
|
+ lantiq,phy1 = <0x7>;
|
|
|
+ lantiq,phy2 = <0x7>;
|
|
|
+ /* lantiq,rising; */
|
|
|
+};
|
|
|
+
|
|
|
+&usb0 {
|
|
|
+ status = "okay";
|
|
|
+ gpios = <&gpio 33 GPIO_ACTIVE_HIGH>;
|
|
|
+ lantiq,portmask = <0x3>;
|
|
|
+};
|