|
|
@@ -0,0 +1,353 @@
|
|
|
+From dca5896703826d0d5fadcc11ee755b83db705571 Mon Sep 17 00:00:00 2001
|
|
|
+From: Chukun Pan <[email protected]>
|
|
|
+Date: Mon, 1 Dec 2025 18:00:06 +0800
|
|
|
+Subject: [PATCH] arm64: dts: rockchip: Add HINLINK H28K
|
|
|
+
|
|
|
+The HINLINK H28K is a development board with the
|
|
|
+Rockchip RK3528 SoC. It has the following features:
|
|
|
+
|
|
|
+- 1x USB 2.0
|
|
|
+- 8/32GB eMMC
|
|
|
+- 1/2/4GB LPDDR4
|
|
|
+- MicroSD card slot
|
|
|
+- 1x 1GbE RTL8111H Ethernet
|
|
|
+- 1x 1GbE RTL8211F Ethernet
|
|
|
+
|
|
|
+Signed-off-by: Chukun Pan <[email protected]>
|
|
|
+---
|
|
|
+ arch/arm64/boot/dts/rockchip/Makefile | 1 +
|
|
|
+ .../boot/dts/rockchip/rk3528-hinlink-h28k.dts | 301 ++++++++++++++++++
|
|
|
+ 2 files changed, 302 insertions(+)
|
|
|
+ create mode 100644 arch/arm64/boot/dts/rockchip/rk3528-hinlink-h28k.dts
|
|
|
+
|
|
|
+--- a/arch/arm64/boot/dts/rockchip/Makefile
|
|
|
++++ b/arch/arm64/boot/dts/rockchip/Makefile
|
|
|
+@@ -76,6 +76,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-ro
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
|
|
|
++dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-hinlink-h28k.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
|
|
|
+ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
|
|
|
+--- /dev/null
|
|
|
++++ b/arch/arm64/boot/dts/rockchip/rk3528-hinlink-h28k.dts
|
|
|
+@@ -0,0 +1,318 @@
|
|
|
++// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
|
|
++
|
|
|
++/dts-v1/;
|
|
|
++
|
|
|
++#include <dt-bindings/input/input.h>
|
|
|
++#include <dt-bindings/leds/common.h>
|
|
|
++#include <dt-bindings/pwm/pwm.h>
|
|
|
++#include "rk3528.dtsi"
|
|
|
++
|
|
|
++/ {
|
|
|
++ model = "HINLINK H28K";
|
|
|
++ compatible = "hinlink,h28k", "rockchip,rk3528";
|
|
|
++
|
|
|
++ aliases {
|
|
|
++ ethernet0 = &gmac1;
|
|
|
++ mmc0 = &sdhci;
|
|
|
++ mmc1 = &sdmmc;
|
|
|
++ serial0 = &uart0;
|
|
|
++ };
|
|
|
++
|
|
|
++ chosen {
|
|
|
++ stdout-path = "serial0:1500000n8";
|
|
|
++ };
|
|
|
++
|
|
|
++ keys {
|
|
|
++ compatible = "adc-keys";
|
|
|
++ io-channels = <&saradc 0>;
|
|
|
++ io-channel-names = "buttons";
|
|
|
++ keyup-threshold-microvolt = <1800000>;
|
|
|
++ poll-interval = <100>;
|
|
|
++
|
|
|
++ button-boot {
|
|
|
++ label = "BOOT";
|
|
|
++ linux,code = <KEY_SETUP>;
|
|
|
++ press-threshold-microvolt = <0>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ compatible = "gpio-leds";
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&lan_led>, <&wan_led>, <&work_led>;
|
|
|
++
|
|
|
++ led-0 {
|
|
|
++ color = <LED_COLOR_ID_AMBER>;
|
|
|
++ function = LED_FUNCTION_LAN;
|
|
|
++ gpios = <&gpio4 RK_PC1 GPIO_ACTIVE_LOW>;
|
|
|
++ linux,default-trigger = "netdev";
|
|
|
++ };
|
|
|
++
|
|
|
++ led-1 {
|
|
|
++ color = <LED_COLOR_ID_BLUE>;
|
|
|
++ function = LED_FUNCTION_WAN;
|
|
|
++ gpios = <&gpio4 RK_PC0 GPIO_ACTIVE_LOW>;
|
|
|
++ linux,default-trigger = "netdev";
|
|
|
++ };
|
|
|
++
|
|
|
++ led-2 {
|
|
|
++ color = <LED_COLOR_ID_GREEN>;
|
|
|
++ function = LED_FUNCTION_STATUS;
|
|
|
++ gpios = <&gpio4 RK_PB7 GPIO_ACTIVE_LOW>;
|
|
|
++ linux,default-trigger = "default-on";
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ vdd_0v9: regulator-0v9-vdd {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vdd_0v9";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <900000>;
|
|
|
++ regulator-max-microvolt = <900000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_ddr: regulator-1v1-vcc-ddr {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc_ddr";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <1100000>;
|
|
|
++ regulator-max-microvolt = <1100000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_1v8: regulator-1v8-vcc {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc_1v8";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <1800000>;
|
|
|
++ vin-supply = <&vcc_3v3>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc_3v3: regulator-3v3-vcc {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc_3v3";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc3v3_sd: regulator-3v3-vcc-sd {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&sdmmc_pwren_l>;
|
|
|
++ regulator-name = "vcc3v3_sd";
|
|
|
++ regulator-min-microvolt = <3300000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ vin-supply = <&vcc_3v3>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vcc5v0_sys: regulator-5v0-vcc-sys {
|
|
|
++ compatible = "regulator-fixed";
|
|
|
++ regulator-name = "vcc5v0_sys";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <5000000>;
|
|
|
++ regulator-max-microvolt = <5000000>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vccio_sd: regulator-vccio-sd {
|
|
|
++ compatible = "regulator-gpio";
|
|
|
++ gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&sdmmc_vol_ctrl_h>;
|
|
|
++ regulator-name = "vccio_sd";
|
|
|
++ regulator-min-microvolt = <1800000>;
|
|
|
++ regulator-max-microvolt = <3300000>;
|
|
|
++ states = <1800000 0x0>, <3300000 0x1>;
|
|
|
++ vin-supply = <&vcc5v0_sys>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vdd_arm: regulator-vdd-arm {
|
|
|
++ compatible = "pwm-regulator";
|
|
|
++ pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
|
|
|
++ pwm-supply = <&vcc5v0_sys>;
|
|
|
++ regulator-name = "vdd_arm";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <746000>;
|
|
|
++ regulator-max-microvolt = <1201000>;
|
|
|
++ regulator-settling-time-up-us = <250>;
|
|
|
++ };
|
|
|
++
|
|
|
++ vdd_logic: regulator-vdd-logic {
|
|
|
++ compatible = "pwm-regulator";
|
|
|
++ pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
|
|
|
++ pwm-supply = <&vcc5v0_sys>;
|
|
|
++ regulator-name = "vdd_logic";
|
|
|
++ regulator-always-on;
|
|
|
++ regulator-boot-on;
|
|
|
++ regulator-min-microvolt = <705000>;
|
|
|
++ regulator-max-microvolt = <1006000>;
|
|
|
++ regulator-settling-time-up-us = <250>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&combphy {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&cpu0 {
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu1 {
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu2 {
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
++};
|
|
|
++
|
|
|
++&cpu3 {
|
|
|
++ cpu-supply = <&vdd_arm>;
|
|
|
++};
|
|
|
++
|
|
|
++&gmac1 {
|
|
|
++ clock_in_out = "output";
|
|
|
++ phy-handle = <&rgmii_phy>;
|
|
|
++ phy-mode = "rgmii-id";
|
|
|
++ phy-supply = <&vcc_3v3>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&rgmii_miim>,
|
|
|
++ <&rgmii_tx_bus2>,
|
|
|
++ <&rgmii_rx_bus2>,
|
|
|
++ <&rgmii_rgmii_clk>,
|
|
|
++ <&rgmii_rgmii_bus>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&gpu {
|
|
|
++ mali-supply = <&vdd_logic>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&mdio1 {
|
|
|
++ rgmii_phy: ethernet-phy@1 {
|
|
|
++ compatible = "ethernet-phy-ieee802.3-c22";
|
|
|
++ reg = <0x1>;
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&gmac1_rstn_l>;
|
|
|
++ reset-assert-us = <20000>;
|
|
|
++ reset-deassert-us = <100000>;
|
|
|
++ reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&pcie {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&rtl8111hs_isolateb_l>;
|
|
|
++ reset-gpios = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
|
|
++ vpcie3v3-supply = <&vcc_3v3>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&pinctrl {
|
|
|
++ gmac {
|
|
|
++ gmac1_rstn_l: gmac1-rstn-l {
|
|
|
++ rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ leds {
|
|
|
++ lan_led: lan-led {
|
|
|
++ rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ wan_led: wan-led {
|
|
|
++ rockchip,pins = <4 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ work_led: work-led {
|
|
|
++ rockchip,pins = <4 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ pcie {
|
|
|
++ rtl8111hs_isolateb_l: rtl8111hs-isolateb-l {
|
|
|
++ rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++
|
|
|
++ sdmmc {
|
|
|
++ sdmmc_pwren_l: sdmmc-pwren-l {
|
|
|
++ rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++
|
|
|
++ sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
|
|
|
++ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
|
|
|
++ };
|
|
|
++ };
|
|
|
++};
|
|
|
++
|
|
|
++&pwm1 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&pwm1m0_pins>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&pwm2 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&pwm2m0_pins>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&saradc {
|
|
|
++ vref-supply = <&vcc_1v8>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sdhci {
|
|
|
++ bus-width = <8>;
|
|
|
++ cap-mmc-highspeed;
|
|
|
++ mmc-hs200-1_8v;
|
|
|
++ non-removable;
|
|
|
++ vmmc-supply = <&vcc_3v3>;
|
|
|
++ vqmmc-supply = <&vcc_1v8>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&sdmmc {
|
|
|
++ bus-width = <4>;
|
|
|
++ cap-sd-highspeed;
|
|
|
++ disable-wp;
|
|
|
++ sd-uhs-sdr104;
|
|
|
++ vmmc-supply = <&vcc3v3_sd>;
|
|
|
++ vqmmc-supply = <&vccio_sd>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&uart0 {
|
|
|
++ pinctrl-names = "default";
|
|
|
++ pinctrl-0 = <&uart0m0_xfer>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb2phy_host {
|
|
|
++ phy-supply = <&vcc5v0_sys>;
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host0_ehci {
|
|
|
++ status = "okay";
|
|
|
++};
|
|
|
++
|
|
|
++&usb_host0_ohci {
|
|
|
++ status = "okay";
|
|
|
++};
|
Chukun Pan