mvebu: separate common parts to new dtsi for FortiGate/FortiWiFi 5xE

Add a new dtsi which contains the common parts of Fortinet
FortiGate/FortiWiFi 5xE series devices.

Signed-off-by: INAGAKI Hiroshi <[email protected]>

target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-50e.dts

@@ -1,175 +1,8 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 
-#include "armada-385-fortinet-fg-xxe.dtsi"
+#include "armada-385-fortinet-fg-5xe.dtsi"
 
 / {
 	model = "Fortinet FortiGate 50E";
 	compatible = "fortinet,fg-50e", "marvell,armada385", "marvell,armada380";
-
-	memory@0 {
-		device_type = "memory";
-		reg = <0x00000000 0x80000000>; /* 2GB */
-	};
-};
-
-&gpio_leds {
-	led-14 {
-		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_WAN;
-		function-enumerator = <1>;
-		linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
-	};
-
-	led-15 {
-		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_WAN;
-		function-enumerator = <2>;
-		linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
-	};
-
-	led-16 {
-		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_AMBER>;
-		function = LED_FUNCTION_SPEED_LAN;
-		function-enumerator = <5>;
-		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
-	};
-
-	led-17 {
-		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
-		color = <LED_COLOR_ID_GREEN>;
-		function = LED_FUNCTION_SPEED_LAN;
-		function-enumerator = <5>;
-		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
-	};
-};
-
-&pinctrl {
-	pmx_phy_switch_pins: phy-switch-pins {
-		marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
-		marvell,function = "gpio";
-	};
-};
-
-&eth1 {
-	status = "okay";
-
-	phy-handle = <&ethphy0>;
-	phy-connection-type = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <2>;
-	nvmem-cells = <&macaddr_bdinfo_d880 1>;
-	nvmem-cell-names = "mac-address";
-};
-
-&eth2 {
-	status = "okay";
-
-	phy-handle = <&ethphy1>;
-	phy-connection-type = "sgmii";
-	buffer-manager = <&bm>;
-	bm,pool-long = <3>;
-	nvmem-cells = <&macaddr_bdinfo_d880 2>;
-	nvmem-cell-names = "mac-address";
-};
-
-&mdio {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
-
-	/* Marvell 88E1512 */
-	ethphy0: ethernet-phy@0 {
-		compatible = "ethernet-phy-id0141,0dd1",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-		interrupt-parent = <&gpio0>;
-		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <10000>;
-		/*
-		 * LINK/ACT   (Green): LED[0], Active Low
-		 * SPEED 100M (Amber): LED[1], Active High
-		 */
-		marvell,reg-init = <3 16 0 0x71>,
-				   <3 17 0 0x4>;
-	};
-
-	/* Marvell 88E1512 */
-	ethphy1: ethernet-phy@1 {
-		compatible = "ethernet-phy-id0141,0dd1",
-			     "ethernet-phy-ieee802.3-c22";
-		reg = <1>;
-		interrupt-parent = <&gpio1>;
-		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
-		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <10000>;
-		reset-deassert-us = <10000>;
-		/*
-		 * LINK/ACT   (Green): LED[0], Active Low
-		 * SPEED 100M (Amber): LED[1], Active High
-		 */
-		marvell,reg-init = <3 16 0 0x71>,
-				   <3 17 0 0x4>;
-	};
-
-	/* Marvell 88E6176 */
-	switch@2 {
-		compatible = "marvell,mv88e6085";
-		reg = <0x2>;
-		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				label = "lan5";
-				nvmem-cells = <&macaddr_bdinfo_d880 7>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@1 {
-				reg = <1>;
-				label = "lan4";
-				nvmem-cells = <&macaddr_bdinfo_d880 6>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@2 {
-				reg = <2>;
-				label = "lan3";
-				nvmem-cells = <&macaddr_bdinfo_d880 5>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@3 {
-				reg = <3>;
-				label = "lan2";
-				nvmem-cells = <&macaddr_bdinfo_d880 4>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@4 {
-				reg = <4>;
-				label = "lan1";
-				nvmem-cells = <&macaddr_bdinfo_d880 3>;
-				nvmem-cell-names = "mac-address";
-			};
-
-			port@6 {
-				reg = <6>;
-				ethernet = <&eth0>;
-				phy-connection-type = "rgmii-id";
-
-				fixed-link {
-					speed = <1000>;
-					full-duplex;
-				};
-			};
-		};
-	};
 };

target/linux/mvebu/files-6.6/arch/arm/boot/dts/marvell/armada-385-fortinet-fg-5xe.dtsi

@@ -0,0 +1,172 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "armada-385-fortinet-fg-xxe.dtsi"
+
+/ {
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x80000000>; /* 2GB */
+	};
+};
+
+&gpio_leds {
+	led-14 {
+		gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_SPEED_WAN;
+		function-enumerator = <1>;
+		linux,default-trigger = "f1072004.mdio-mii:00:1Gbps";
+	};
+
+	led-15 {
+		gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_SPEED_WAN;
+		function-enumerator = <2>;
+		linux,default-trigger = "f1072004.mdio-mii:01:1Gbps";
+	};
+
+	led-16 {
+		gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_AMBER>;
+		function = LED_FUNCTION_SPEED_LAN;
+		function-enumerator = <5>;
+		linux,default-trigger = "mv88e6xxx-1:00:100Mbps";
+	};
+
+	led-17 {
+		gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
+		color = <LED_COLOR_ID_GREEN>;
+		function = LED_FUNCTION_SPEED_LAN;
+		function-enumerator = <5>;
+		linux,default-trigger = "mv88e6xxx-1:00:1Gbps";
+	};
+};
+
+&pinctrl {
+	pmx_phy_switch_pins: phy-switch-pins {
+		marvell,pins = "mpp19", "mpp20", "mpp23", "mpp34", "mpp41";
+		marvell,function = "gpio";
+	};
+};
+
+&eth1 {
+	status = "okay";
+
+	phy-handle = <&ethphy0>;
+	phy-connection-type = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <2>;
+	nvmem-cells = <&macaddr_bdinfo_d880 1>;
+	nvmem-cell-names = "mac-address";
+};
+
+&eth2 {
+	status = "okay";
+
+	phy-handle = <&ethphy1>;
+	phy-connection-type = "sgmii";
+	buffer-manager = <&bm>;
+	bm,pool-long = <3>;
+	nvmem-cells = <&macaddr_bdinfo_d880 2>;
+	nvmem-cell-names = "mac-address";
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mdio_pins>, <&pmx_phy_switch_pins>;
+
+	/* Marvell 88E1512 */
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-id0141,0dd1",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <20 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+		/*
+		 * LINK/ACT   (Green): LED[0], Active Low
+		 * SPEED 100M (Amber): LED[1], Active High
+		 */
+		marvell,reg-init = <3 16 0 0x71>,
+				   <3 17 0 0x4>;
+	};
+
+	/* Marvell 88E1512 */
+	ethphy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id0141,0dd1",
+			     "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <9 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <10000>;
+		/*
+		 * LINK/ACT   (Green): LED[0], Active Low
+		 * SPEED 100M (Amber): LED[1], Active High
+		 */
+		marvell,reg-init = <3 16 0 0x71>,
+				   <3 17 0 0x4>;
+	};
+
+	/* Marvell 88E6176 */
+	switch@2 {
+		compatible = "marvell,mv88e6085";
+		reg = <0x2>;
+		reset-gpios = <&gpio0 19 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "lan5";
+				nvmem-cells = <&macaddr_bdinfo_d880 7>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "lan4";
+				nvmem-cells = <&macaddr_bdinfo_d880 6>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "lan3";
+				nvmem-cells = <&macaddr_bdinfo_d880 5>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "lan2";
+				nvmem-cells = <&macaddr_bdinfo_d880 4>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "lan1";
+				nvmem-cells = <&macaddr_bdinfo_d880 3>;
+				nvmem-cell-names = "mac-address";
+			};
+
+			port@6 {
+				reg = <6>;
+				ethernet = <&eth0>;
+				phy-connection-type = "rgmii-id";
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};