mvebu: enable Aquantia phy driver for Puzzle devices

Fixes Ethernet link status on all ports and makes 2.5G ports usable
in 2.5G and 1G full-duplex mode.

Signed-off-by: Daniel Golle <[email protected]>

target/linux/mvebu/cortexa72/config-5.10

@@ -1,4 +1,5 @@
 CONFIG_64BIT=y
+CONFIG_AQUANTIA_PHY=y
 CONFIG_ARCH_DMA_ADDR_T_64BIT=y
 CONFIG_ARCH_MMAP_RND_BITS=18
 CONFIG_ARCH_MMAP_RND_BITS_MAX=24

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9131-puzzle-m901.dts

@@ -169,21 +169,21 @@
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy2 0>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy0>;
 };
 
 &cp0_eth1 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy4 1>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy1>;
 };
 
 &cp0_eth2 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy5 2>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy2>;
 };
 
 &cp0_gpio1 {
@@ -334,21 +334,21 @@
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy2 0>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy0>;
 };
 
 &cp1_eth1 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy4 1>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy1>;
 };
 
 &cp1_eth2 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy5 2>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy2>;
 };
 
 &cp1_sata0 {

target/linux/mvebu/files/arch/arm64/boot/dts/marvell/cn9132-puzzle-m902.dts

@@ -214,21 +214,21 @@
 	status = "okay";
 	phy-mode = "10gbase-kr";
 	phys = <&cp0_comphy2 0>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy0>;
 };
 
 &cp0_eth1 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy4 1>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy1>;
 };
 
 &cp0_eth2 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp0_comphy1 2>;
-	managed = "in-band-status";
+	phy = <&cp0_nbaset_phy2>;
 };
 
 &cp0_gpio1 {
@@ -397,21 +397,21 @@
 	status = "okay";
 	phy-mode = "10gbase-kr";
 	phys = <&cp1_comphy2 0>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy0>;
 };
 
 &cp1_eth1 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy4 1>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy1>;
 };
 
 &cp1_eth2 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp1_comphy1 2>;
-	managed = "in-band-status";
+	phy = <&cp1_nbaset_phy2>;
 };
 
 &cp1_gpio1 {
@@ -498,21 +498,21 @@
 	status = "okay";
 	phy-mode = "10gbase-kr";
 	phys = <&cp2_comphy2 0>;
-	managed = "in-band-status";
+	phy = <&cp2_nbaset_phy0>;
 };
 
 &cp2_eth1 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp2_comphy4 1>;
-	managed = "in-band-status";
+	phy = <&cp2_nbaset_phy1>;
 };
 
 &cp2_eth2 {
 	status = "okay";
 	phy-mode = "2500base-x";
 	phys = <&cp2_comphy1 2>;
-	managed = "in-band-status";
+	phy = <&cp2_nbaset_phy2>;
 };
 
 &cp2_gpio1 {