|
|
@@ -1,2189 +0,0 @@
|
|
|
---- a/arch/mips/Kconfig
|
|
|
-+++ b/arch/mips/Kconfig
|
|
|
-@@ -96,6 +96,19 @@ config AR7
|
|
|
- Support for the Texas Instruments AR7 System-on-a-Chip
|
|
|
- family: TNETD7100, 7200 and 7300.
|
|
|
-
|
|
|
-+config ATH25
|
|
|
-+ bool "Atheros AR231x/AR531x SoC support"
|
|
|
-+ select CEVT_R4K
|
|
|
-+ select CSRC_R4K
|
|
|
-+ select DMA_NONCOHERENT
|
|
|
-+ select IRQ_CPU
|
|
|
-+ select IRQ_DOMAIN
|
|
|
-+ select SYS_HAS_CPU_MIPS32_R1
|
|
|
-+ select SYS_SUPPORTS_BIG_ENDIAN
|
|
|
-+ select SYS_SUPPORTS_32BIT_KERNEL
|
|
|
-+ help
|
|
|
-+ Support for Atheros AR231x and Atheros AR531x based boards
|
|
|
-+
|
|
|
- config ATH79
|
|
|
- bool "Atheros AR71XX/AR724X/AR913X based boards"
|
|
|
- select ARCH_REQUIRE_GPIOLIB
|
|
|
-@@ -835,6 +848,7 @@ config MIPS_PARAVIRT
|
|
|
- endchoice
|
|
|
-
|
|
|
- source "arch/mips/alchemy/Kconfig"
|
|
|
-+source "arch/mips/ath25/Kconfig"
|
|
|
- source "arch/mips/ath79/Kconfig"
|
|
|
- source "arch/mips/bcm47xx/Kconfig"
|
|
|
- source "arch/mips/bcm63xx/Kconfig"
|
|
|
---- a/arch/mips/Kbuild.platforms
|
|
|
-+++ b/arch/mips/Kbuild.platforms
|
|
|
-@@ -2,6 +2,7 @@
|
|
|
-
|
|
|
- platforms += alchemy
|
|
|
- platforms += ar7
|
|
|
-+platforms += ath25
|
|
|
- platforms += ath79
|
|
|
- platforms += bcm47xx
|
|
|
- platforms += bcm63xx
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/Platform
|
|
|
-@@ -0,0 +1,6 @@
|
|
|
-+#
|
|
|
-+# Atheros AR531X/AR231X WiSoC
|
|
|
-+#
|
|
|
-+platform-$(CONFIG_ATH25) += ath25/
|
|
|
-+cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25
|
|
|
-+load-$(CONFIG_ATH25) += 0xffffffff80041000
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/Kconfig
|
|
|
-@@ -0,0 +1,9 @@
|
|
|
-+config SOC_AR5312
|
|
|
-+ bool "Atheros AR5312/AR2312+ SoC support"
|
|
|
-+ depends on ATH25
|
|
|
-+ default y
|
|
|
-+
|
|
|
-+config SOC_AR2315
|
|
|
-+ bool "Atheros AR2315+ SoC support"
|
|
|
-+ depends on ATH25
|
|
|
-+ default y
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/Makefile
|
|
|
-@@ -0,0 +1,13 @@
|
|
|
-+#
|
|
|
-+# This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+# License. See the file "COPYING" in the main directory of this archive
|
|
|
-+# for more details.
|
|
|
-+#
|
|
|
-+# Copyright (C) 2006 FON Technology, SL.
|
|
|
-+# Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+# Copyright (C) 2006-2009 Felix Fietkau <[email protected]>
|
|
|
-+#
|
|
|
-+
|
|
|
-+obj-y += board.o prom.o devices.o
|
|
|
-+obj-$(CONFIG_SOC_AR5312) += ar5312.o
|
|
|
-+obj-$(CONFIG_SOC_AR2315) += ar2315.o
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/board.c
|
|
|
-@@ -0,0 +1,234 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 FON Technology, SL.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006-2009 Felix Fietkau <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <linux/interrupt.h>
|
|
|
-+#include <asm/irq_cpu.h>
|
|
|
-+#include <asm/reboot.h>
|
|
|
-+#include <asm/bootinfo.h>
|
|
|
-+#include <asm/time.h>
|
|
|
-+
|
|
|
-+#include <ath25_platform.h>
|
|
|
-+#include "devices.h"
|
|
|
-+#include "ar5312.h"
|
|
|
-+#include "ar2315.h"
|
|
|
-+
|
|
|
-+void (*ath25_irq_dispatch)(void);
|
|
|
-+
|
|
|
-+static inline bool check_radio_magic(const void __iomem *addr)
|
|
|
-+{
|
|
|
-+ addr += 0x7a; /* offset for flash magic */
|
|
|
-+ return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline bool check_notempty(const void __iomem *addr)
|
|
|
-+{
|
|
|
-+ return __raw_readl(addr) != 0xffffffff;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline bool check_board_data(const void __iomem *addr, bool broken)
|
|
|
-+{
|
|
|
-+ /* config magic found */
|
|
|
-+ if (__raw_readl(addr) == ATH25_BD_MAGIC)
|
|
|
-+ return true;
|
|
|
-+
|
|
|
-+ if (!broken)
|
|
|
-+ return false;
|
|
|
-+
|
|
|
-+ /* broken board data detected, use radio data to find the
|
|
|
-+ * offset, user will fix this */
|
|
|
-+
|
|
|
-+ if (check_radio_magic(addr + 0x1000))
|
|
|
-+ return true;
|
|
|
-+ if (check_radio_magic(addr + 0xf8))
|
|
|
-+ return true;
|
|
|
-+
|
|
|
-+ return false;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static const void __iomem * __init find_board_config(const void __iomem *limit,
|
|
|
-+ const bool broken)
|
|
|
-+{
|
|
|
-+ const void __iomem *addr;
|
|
|
-+ const void __iomem *begin = limit - 0x1000;
|
|
|
-+ const void __iomem *end = limit - 0x30000;
|
|
|
-+
|
|
|
-+ for (addr = begin; addr >= end; addr -= 0x1000)
|
|
|
-+ if (check_board_data(addr, broken))
|
|
|
-+ return addr;
|
|
|
-+
|
|
|
-+ return NULL;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static const void __iomem * __init find_radio_config(const void __iomem *limit,
|
|
|
-+ const void __iomem *bcfg)
|
|
|
-+{
|
|
|
-+ const void __iomem *rcfg, *begin, *end;
|
|
|
-+
|
|
|
-+ /*
|
|
|
-+ * Now find the start of Radio Configuration data, using heuristics:
|
|
|
-+ * Search forward from Board Configuration data by 0x1000 bytes
|
|
|
-+ * at a time until we find non-0xffffffff.
|
|
|
-+ */
|
|
|
-+ begin = bcfg + 0x1000;
|
|
|
-+ end = limit;
|
|
|
-+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
|
|
|
-+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
|
|
|
-+ return rcfg;
|
|
|
-+
|
|
|
-+ /* AR2316 relocates radio config to new location */
|
|
|
-+ begin = bcfg + 0xf8;
|
|
|
-+ end = limit - 0x1000 + 0xf8;
|
|
|
-+ for (rcfg = begin; rcfg < end; rcfg += 0x1000)
|
|
|
-+ if (check_notempty(rcfg) && check_radio_magic(rcfg))
|
|
|
-+ return rcfg;
|
|
|
-+
|
|
|
-+ return NULL;
|
|
|
-+}
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * NB: Search region size could be larger than the actual flash size,
|
|
|
-+ * but this shouldn't be a problem here, because the flash
|
|
|
-+ * will simply be mapped multiple times.
|
|
|
-+ */
|
|
|
-+int __init ath25_find_config(phys_addr_t base, unsigned long size)
|
|
|
-+{
|
|
|
-+ const void __iomem *flash_base, *flash_limit;
|
|
|
-+ struct ath25_boarddata *config;
|
|
|
-+ unsigned int rcfg_size;
|
|
|
-+ int broken_boarddata = 0;
|
|
|
-+ const void __iomem *bcfg, *rcfg;
|
|
|
-+ u8 *board_data;
|
|
|
-+ u8 *radio_data;
|
|
|
-+ u8 *mac_addr;
|
|
|
-+ u32 offset;
|
|
|
-+
|
|
|
-+ flash_base = ioremap_nocache(base, size);
|
|
|
-+ flash_limit = flash_base + size;
|
|
|
-+
|
|
|
-+ ath25_board.config = NULL;
|
|
|
-+ ath25_board.radio = NULL;
|
|
|
-+
|
|
|
-+ /* Copy the board and radio data to RAM, because accessing the mapped
|
|
|
-+ * memory of the flash directly after booting is not safe */
|
|
|
-+
|
|
|
-+ /* Try to find valid board and radio data */
|
|
|
-+ bcfg = find_board_config(flash_limit, false);
|
|
|
-+
|
|
|
-+ /* If that fails, try to at least find valid radio data */
|
|
|
-+ if (!bcfg) {
|
|
|
-+ bcfg = find_board_config(flash_limit, true);
|
|
|
-+ broken_boarddata = 1;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ if (!bcfg) {
|
|
|
-+ pr_warn("WARNING: No board configuration data found!\n");
|
|
|
-+ goto error;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL);
|
|
|
-+ ath25_board.config = (struct ath25_boarddata *)board_data;
|
|
|
-+ memcpy_fromio(board_data, bcfg, 0x100);
|
|
|
-+ if (broken_boarddata) {
|
|
|
-+ pr_warn("WARNING: broken board data detected\n");
|
|
|
-+ config = ath25_board.config;
|
|
|
-+ if (is_zero_ether_addr(config->enet0_mac)) {
|
|
|
-+ pr_info("Fixing up empty mac addresses\n");
|
|
|
-+ config->reset_config_gpio = 0xffff;
|
|
|
-+ config->sys_led_gpio = 0xffff;
|
|
|
-+ random_ether_addr(config->wlan0_mac);
|
|
|
-+ config->wlan0_mac[0] &= ~0x06;
|
|
|
-+ random_ether_addr(config->enet0_mac);
|
|
|
-+ random_ether_addr(config->enet1_mac);
|
|
|
-+ }
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ /* Radio config starts 0x100 bytes after board config, regardless
|
|
|
-+ * of what the physical layout on the flash chip looks like */
|
|
|
-+
|
|
|
-+ rcfg = find_radio_config(flash_limit, bcfg);
|
|
|
-+ if (!rcfg) {
|
|
|
-+ pr_warn("WARNING: Could not find Radio Configuration data\n");
|
|
|
-+ goto error;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff);
|
|
|
-+ ath25_board.radio = radio_data;
|
|
|
-+ offset = radio_data - board_data;
|
|
|
-+ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg,
|
|
|
-+ offset);
|
|
|
-+ rcfg_size = BOARD_CONFIG_BUFSZ - offset;
|
|
|
-+ memcpy_fromio(radio_data, rcfg, rcfg_size);
|
|
|
-+
|
|
|
-+ mac_addr = &radio_data[0x1d * 2];
|
|
|
-+ if (is_broadcast_ether_addr(mac_addr)) {
|
|
|
-+ pr_info("Radio MAC is blank; using board-data\n");
|
|
|
-+ ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac);
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ iounmap(flash_base);
|
|
|
-+
|
|
|
-+ return 0;
|
|
|
-+
|
|
|
-+error:
|
|
|
-+ iounmap(flash_base);
|
|
|
-+ return -ENODEV;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static void ath25_halt(void)
|
|
|
-+{
|
|
|
-+ local_irq_disable();
|
|
|
-+ unreachable();
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init plat_mem_setup(void)
|
|
|
-+{
|
|
|
-+ _machine_halt = ath25_halt;
|
|
|
-+ pm_power_off = ath25_halt;
|
|
|
-+
|
|
|
-+ if (is_ar5312())
|
|
|
-+ ar5312_plat_mem_setup();
|
|
|
-+ else
|
|
|
-+ ar2315_plat_mem_setup();
|
|
|
-+
|
|
|
-+ /* Disable data watchpoints */
|
|
|
-+ write_c0_watchlo0(0);
|
|
|
-+}
|
|
|
-+
|
|
|
-+asmlinkage void plat_irq_dispatch(void)
|
|
|
-+{
|
|
|
-+ ath25_irq_dispatch();
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init plat_time_init(void)
|
|
|
-+{
|
|
|
-+ if (is_ar5312())
|
|
|
-+ ar5312_plat_time_init();
|
|
|
-+ else
|
|
|
-+ ar2315_plat_time_init();
|
|
|
-+}
|
|
|
-+
|
|
|
-+unsigned int __cpuinit get_c0_compare_int(void)
|
|
|
-+{
|
|
|
-+ return CP0_LEGACY_COMPARE_IRQ;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init arch_init_irq(void)
|
|
|
-+{
|
|
|
-+ clear_c0_status(ST0_IM);
|
|
|
-+ mips_cpu_irq_init();
|
|
|
-+
|
|
|
-+ /* Initialize interrupt controllers */
|
|
|
-+ if (is_ar5312())
|
|
|
-+ ar5312_arch_init_irq();
|
|
|
-+ else
|
|
|
-+ ar2315_arch_init_irq();
|
|
|
-+}
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/prom.c
|
|
|
-@@ -0,0 +1,26 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright MontaVista Software Inc
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 FON Technology, SL.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006 Felix Fietkau <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Prom setup file for AR5312/AR231x SoCs
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <asm/bootinfo.h>
|
|
|
-+
|
|
|
-+void __init prom_init(void)
|
|
|
-+{
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init prom_free_prom_memory(void)
|
|
|
-+{
|
|
|
-+}
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h
|
|
|
-@@ -0,0 +1,73 @@
|
|
|
-+#ifndef __ASM_MACH_ATH25_PLATFORM_H
|
|
|
-+#define __ASM_MACH_ATH25_PLATFORM_H
|
|
|
-+
|
|
|
-+#include <linux/etherdevice.h>
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * This is board-specific data that is stored in a "fixed" location in flash.
|
|
|
-+ * It is shared across operating systems, so it should not be changed lightly.
|
|
|
-+ * The main reason we need it is in order to extract the ethernet MAC
|
|
|
-+ * address(es).
|
|
|
-+ */
|
|
|
-+struct ath25_boarddata {
|
|
|
-+ u32 magic; /* board data is valid */
|
|
|
-+#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */
|
|
|
-+ u16 cksum; /* checksum (starting with BD_REV 2) */
|
|
|
-+ u16 rev; /* revision of this struct */
|
|
|
-+#define BD_REV 4
|
|
|
-+ char board_name[64]; /* Name of board */
|
|
|
-+ u16 major; /* Board major number */
|
|
|
-+ u16 minor; /* Board minor number */
|
|
|
-+ u32 flags; /* Board configuration */
|
|
|
-+#define BD_ENET0 0x00000001 /* ENET0 is stuffed */
|
|
|
-+#define BD_ENET1 0x00000002 /* ENET1 is stuffed */
|
|
|
-+#define BD_UART1 0x00000004 /* UART1 is stuffed */
|
|
|
-+#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */
|
|
|
-+#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */
|
|
|
-+#define BD_SYSLED 0x00000020 /* System LED stuffed */
|
|
|
-+#define BD_EXTUARTCLK 0x00000040 /* External UART clock */
|
|
|
-+#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */
|
|
|
-+#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */
|
|
|
-+#define BD_WLAN0 0x00000200 /* Enable WLAN0 */
|
|
|
-+#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */
|
|
|
-+#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */
|
|
|
-+#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */
|
|
|
-+#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */
|
|
|
-+#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */
|
|
|
-+#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */
|
|
|
-+#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */
|
|
|
-+#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */
|
|
|
-+ u16 reset_config_gpio; /* Reset factory GPIO pin */
|
|
|
-+ u16 sys_led_gpio; /* System LED GPIO pin */
|
|
|
-+
|
|
|
-+ u32 cpu_freq; /* CPU core frequency in Hz */
|
|
|
-+ u32 sys_freq; /* System frequency in Hz */
|
|
|
-+ u32 cnt_freq; /* Calculated C0_COUNT frequency */
|
|
|
-+
|
|
|
-+ u8 wlan0_mac[ETH_ALEN];
|
|
|
-+ u8 enet0_mac[ETH_ALEN];
|
|
|
-+ u8 enet1_mac[ETH_ALEN];
|
|
|
-+
|
|
|
-+ u16 pci_id; /* Pseudo PCIID for common code */
|
|
|
-+ u16 mem_cap; /* cap bank1 in MB */
|
|
|
-+
|
|
|
-+ /* version 3 */
|
|
|
-+ u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */
|
|
|
-+};
|
|
|
-+
|
|
|
-+#define BOARD_CONFIG_BUFSZ 0x1000
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Platform device information for the Wireless MAC
|
|
|
-+ */
|
|
|
-+struct ar231x_board_config {
|
|
|
-+ u16 devid;
|
|
|
-+
|
|
|
-+ /* board config data */
|
|
|
-+ struct ath25_boarddata *config;
|
|
|
-+
|
|
|
-+ /* radio calibration data */
|
|
|
-+ const char *radio;
|
|
|
-+};
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_PLATFORM_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h
|
|
|
-@@ -0,0 +1,64 @@
|
|
|
-+/*
|
|
|
-+ * Atheros AR231x/AR531x SoC specific CPU feature overrides
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2008 Gabor Juhos <[email protected]>
|
|
|
-+ *
|
|
|
-+ * This file was derived from: include/asm-mips/cpu-features.h
|
|
|
-+ * Copyright (C) 2003, 2004 Ralf Baechle
|
|
|
-+ * Copyright (C) 2004 Maciej W. Rozycki
|
|
|
-+ *
|
|
|
-+ * This program is free software; you can redistribute it and/or modify it
|
|
|
-+ * under the terms of the GNU General Public License version 2 as published
|
|
|
-+ * by the Free Software Foundation.
|
|
|
-+ *
|
|
|
-+ */
|
|
|
-+#ifndef __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H
|
|
|
-+#define __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core.
|
|
|
-+ */
|
|
|
-+#define cpu_has_tlb 1
|
|
|
-+#define cpu_has_4kex 1
|
|
|
-+#define cpu_has_3k_cache 0
|
|
|
-+#define cpu_has_4k_cache 1
|
|
|
-+#define cpu_has_tx39_cache 0
|
|
|
-+#define cpu_has_sb1_cache 0
|
|
|
-+#define cpu_has_fpu 0
|
|
|
-+#define cpu_has_32fpr 0
|
|
|
-+#define cpu_has_counter 1
|
|
|
-+#define cpu_has_ejtag 1
|
|
|
-+
|
|
|
-+#if !defined(CONFIG_SOC_AR5312)
|
|
|
-+# define cpu_has_llsc 1
|
|
|
-+#else
|
|
|
-+/*
|
|
|
-+ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the
|
|
|
-+ * ll/sc instructions.
|
|
|
-+ */
|
|
|
-+# define cpu_has_llsc 0
|
|
|
-+#endif
|
|
|
-+
|
|
|
-+#define cpu_has_mips16 0
|
|
|
-+#define cpu_has_mdmx 0
|
|
|
-+#define cpu_has_mips3d 0
|
|
|
-+#define cpu_has_smartmips 0
|
|
|
-+
|
|
|
-+#define cpu_has_mips32r1 1
|
|
|
-+
|
|
|
-+#if !defined(CONFIG_SOC_AR5312)
|
|
|
-+# define cpu_has_mips32r2 1
|
|
|
-+#endif
|
|
|
-+
|
|
|
-+#define cpu_has_mips64r1 0
|
|
|
-+#define cpu_has_mips64r2 0
|
|
|
-+
|
|
|
-+#define cpu_has_dsp 0
|
|
|
-+#define cpu_has_mipsmt 0
|
|
|
-+
|
|
|
-+#define cpu_has_64bits 0
|
|
|
-+#define cpu_has_64bit_zero_reg 0
|
|
|
-+#define cpu_has_64bit_gp_regs 0
|
|
|
-+#define cpu_has_64bit_addresses 0
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h
|
|
|
-@@ -0,0 +1,82 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2006 Ralf Baechle <[email protected]>
|
|
|
-+ * Copyright (C) 2007 Felix Fietkau <[email protected]>
|
|
|
-+ *
|
|
|
-+ */
|
|
|
-+#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H
|
|
|
-+#define __ASM_MACH_ATH25_DMA_COHERENCE_H
|
|
|
-+
|
|
|
-+#include <linux/device.h>
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * We need some arbitrary non-zero value to be programmed to the BAR1 register
|
|
|
-+ * of PCI host controller to enable DMA. The same value should be used as the
|
|
|
-+ * offset to calculate the physical address of DMA buffer for PCI devices.
|
|
|
-+ */
|
|
|
-+#define AR2315_PCI_HOST_SDRAM_BASEADDR 0x20000000
|
|
|
-+
|
|
|
-+static inline dma_addr_t ath25_dev_offset(struct device *dev)
|
|
|
-+{
|
|
|
-+#ifdef CONFIG_PCI
|
|
|
-+ extern struct bus_type pci_bus_type;
|
|
|
-+
|
|
|
-+ if (dev && dev->bus == &pci_bus_type)
|
|
|
-+ return AR2315_PCI_HOST_SDRAM_BASEADDR;
|
|
|
-+#endif
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline dma_addr_t
|
|
|
-+plat_map_dma_mem(struct device *dev, void *addr, size_t size)
|
|
|
-+{
|
|
|
-+ return virt_to_phys(addr) + ath25_dev_offset(dev);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline dma_addr_t
|
|
|
-+plat_map_dma_mem_page(struct device *dev, struct page *page)
|
|
|
-+{
|
|
|
-+ return page_to_phys(page) + ath25_dev_offset(dev);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline unsigned long
|
|
|
-+plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr)
|
|
|
-+{
|
|
|
-+ return dma_addr - ath25_dev_offset(dev);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void
|
|
|
-+plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size,
|
|
|
-+ enum dma_data_direction direction)
|
|
|
-+{
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline int plat_dma_supported(struct device *dev, u64 mask)
|
|
|
-+{
|
|
|
-+ return 1;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void plat_extra_sync_for_device(struct device *dev)
|
|
|
-+{
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline int plat_dma_mapping_error(struct device *dev,
|
|
|
-+ dma_addr_t dma_addr)
|
|
|
-+{
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline int plat_device_is_coherent(struct device *dev)
|
|
|
-+{
|
|
|
-+#ifdef CONFIG_DMA_COHERENT
|
|
|
-+ return 1;
|
|
|
-+#endif
|
|
|
-+#ifdef CONFIG_DMA_NONCOHERENT
|
|
|
-+ return 0;
|
|
|
-+#endif
|
|
|
-+}
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/include/asm/mach-ath25/gpio.h
|
|
|
-@@ -0,0 +1,16 @@
|
|
|
-+#ifndef __ASM_MACH_ATH25_GPIO_H
|
|
|
-+#define __ASM_MACH_ATH25_GPIO_H
|
|
|
-+
|
|
|
-+#include <asm-generic/gpio.h>
|
|
|
-+
|
|
|
-+#define gpio_get_value __gpio_get_value
|
|
|
-+#define gpio_set_value __gpio_set_value
|
|
|
-+#define gpio_cansleep __gpio_cansleep
|
|
|
-+#define gpio_to_irq __gpio_to_irq
|
|
|
-+
|
|
|
-+static inline int irq_to_gpio(unsigned irq)
|
|
|
-+{
|
|
|
-+ return -EINVAL;
|
|
|
-+}
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_GPIO_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/include/asm/mach-ath25/war.h
|
|
|
-@@ -0,0 +1,25 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2008 Felix Fietkau <[email protected]>
|
|
|
-+ */
|
|
|
-+#ifndef __ASM_MACH_ATH25_WAR_H
|
|
|
-+#define __ASM_MACH_ATH25_WAR_H
|
|
|
-+
|
|
|
-+#define R4600_V1_INDEX_ICACHEOP_WAR 0
|
|
|
-+#define R4600_V1_HIT_CACHEOP_WAR 0
|
|
|
-+#define R4600_V2_HIT_CACHEOP_WAR 0
|
|
|
-+#define R5432_CP0_INTERRUPT_WAR 0
|
|
|
-+#define BCM1250_M3_WAR 0
|
|
|
-+#define SIBYTE_1956_WAR 0
|
|
|
-+#define MIPS4K_ICACHE_REFILL_WAR 0
|
|
|
-+#define MIPS_CACHE_SYNC_WAR 0
|
|
|
-+#define TX49XX_ICACHE_INDEX_INV_WAR 0
|
|
|
-+#define RM9000_CDEX_SMP_WAR 0
|
|
|
-+#define ICACHE_REFILLS_WORKAROUND_WAR 0
|
|
|
-+#define R10000_LLSC_WAR 0
|
|
|
-+#define MIPS34K_MISSED_ITLB_WAR 0
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_WAR_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar2315_regs.h
|
|
|
-@@ -0,0 +1,410 @@
|
|
|
-+/*
|
|
|
-+ * Register definitions for AR2315+
|
|
|
-+ *
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 FON Technology, SL.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006-2008 Felix Fietkau <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#ifndef __ASM_MACH_ATH25_AR2315_REGS_H
|
|
|
-+#define __ASM_MACH_ATH25_AR2315_REGS_H
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * IRQs
|
|
|
-+ */
|
|
|
-+#define AR2315_IRQ_MISC (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */
|
|
|
-+#define AR2315_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */
|
|
|
-+#define AR2315_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */
|
|
|
-+#define AR2315_IRQ_LCBUS_PCI (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */
|
|
|
-+#define AR2315_IRQ_WLAN0_POLL (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Miscellaneous interrupts, which share IP2.
|
|
|
-+ */
|
|
|
-+#define AR2315_MISC_IRQ_UART0 0
|
|
|
-+#define AR2315_MISC_IRQ_I2C_RSVD 1
|
|
|
-+#define AR2315_MISC_IRQ_SPI 2
|
|
|
-+#define AR2315_MISC_IRQ_AHB 3
|
|
|
-+#define AR2315_MISC_IRQ_APB 4
|
|
|
-+#define AR2315_MISC_IRQ_TIMER 5
|
|
|
-+#define AR2315_MISC_IRQ_GPIO 6
|
|
|
-+#define AR2315_MISC_IRQ_WATCHDOG 7
|
|
|
-+#define AR2315_MISC_IRQ_IR_RSVD 8
|
|
|
-+#define AR2315_MISC_IRQ_COUNT 9
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Address map
|
|
|
-+ */
|
|
|
-+#define AR2315_SPI_READ_BASE 0x08000000 /* SPI flash */
|
|
|
-+#define AR2315_SPI_READ_SIZE 0x01000000
|
|
|
-+#define AR2315_WLAN0_BASE 0x10000000 /* Wireless MMR */
|
|
|
-+#define AR2315_PCI_BASE 0x10100000 /* PCI MMR */
|
|
|
-+#define AR2315_PCI_SIZE 0x00001000
|
|
|
-+#define AR2315_SDRAMCTL_BASE 0x10300000 /* SDRAM MMR */
|
|
|
-+#define AR2315_SDRAMCTL_SIZE 0x00000020
|
|
|
-+#define AR2315_LOCAL_BASE 0x10400000 /* Local bus MMR */
|
|
|
-+#define AR2315_ENET0_BASE 0x10500000 /* Ethernet MMR */
|
|
|
-+#define AR2315_RST_BASE 0x11000000 /* Reset control MMR */
|
|
|
-+#define AR2315_RST_SIZE 0x00000100
|
|
|
-+#define AR2315_UART0_BASE 0x11100000 /* UART MMR */
|
|
|
-+#define AR2315_SPI_MMR_BASE 0x11300000 /* SPI flash MMR */
|
|
|
-+#define AR2315_SPI_MMR_SIZE 0x00000010
|
|
|
-+#define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */
|
|
|
-+#define AR2315_PCI_EXT_SIZE 0x40000000
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Configuration registers
|
|
|
-+ */
|
|
|
-+
|
|
|
-+/* Cold reset register */
|
|
|
-+#define AR2315_COLD_RESET 0x0000
|
|
|
-+
|
|
|
-+#define AR2315_RESET_COLD_AHB 0x00000001
|
|
|
-+#define AR2315_RESET_COLD_APB 0x00000002
|
|
|
-+#define AR2315_RESET_COLD_CPU 0x00000004
|
|
|
-+#define AR2315_RESET_COLD_CPUWARM 0x00000008
|
|
|
-+#define AR2315_RESET_SYSTEM (RESET_COLD_CPU |\
|
|
|
-+ RESET_COLD_APB |\
|
|
|
-+ RESET_COLD_AHB) /* full system */
|
|
|
-+#define AR2317_RESET_SYSTEM 0x00000010
|
|
|
-+
|
|
|
-+/* Reset register */
|
|
|
-+#define AR2315_RESET 0x0004
|
|
|
-+
|
|
|
-+#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */
|
|
|
-+#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BB */
|
|
|
-+#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */
|
|
|
-+#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */
|
|
|
-+#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset mem control */
|
|
|
-+#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */
|
|
|
-+#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */
|
|
|
-+#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI iface */
|
|
|
-+#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */
|
|
|
-+#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR iface */
|
|
|
-+#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */
|
|
|
-+#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 MAC */
|
|
|
-+
|
|
|
-+/* AHB master arbitration control */
|
|
|
-+#define AR2315_AHB_ARB_CTL 0x0008
|
|
|
-+
|
|
|
-+#define AR2315_ARB_CPU 0x00000001 /* CPU, default */
|
|
|
-+#define AR2315_ARB_WLAN 0x00000002 /* WLAN */
|
|
|
-+#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
|
|
|
-+#define AR2315_ARB_LOCAL 0x00000008 /* Local bus */
|
|
|
-+#define AR2315_ARB_PCI 0x00000010 /* PCI bus */
|
|
|
-+#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */
|
|
|
-+#define AR2315_ARB_RETRY 0x00000100 /* Retry policy (debug) */
|
|
|
-+
|
|
|
-+/* Config Register */
|
|
|
-+#define AR2315_ENDIAN_CTL 0x000c
|
|
|
-+
|
|
|
-+#define AR2315_CONFIG_AHB 0x00000001 /* EC-AHB bridge endian */
|
|
|
-+#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */
|
|
|
-+#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */
|
|
|
-+#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */
|
|
|
-+#define AR2315_CONFIG_MEMCTL 0x00000010 /* Mem controller endian */
|
|
|
-+#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */
|
|
|
-+#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */
|
|
|
-+#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */
|
|
|
-+#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */
|
|
|
-+#define AR2315_CONFIG_BIG 0x00000400
|
|
|
-+#define AR2315_CONFIG_PCIAHB 0x00000800
|
|
|
-+#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000
|
|
|
-+#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */
|
|
|
-+#define AR2315_CONFIG_CPU_DRAM 0x00010000
|
|
|
-+#define AR2315_CONFIG_CPU_PCI 0x00020000
|
|
|
-+#define AR2315_CONFIG_CPU_MMR 0x00040000
|
|
|
-+
|
|
|
-+/* NMI control */
|
|
|
-+#define AR2315_NMI_CTL 0x0010
|
|
|
-+
|
|
|
-+#define AR2315_NMI_EN 1
|
|
|
-+
|
|
|
-+/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */
|
|
|
-+#define AR2315_SREV 0x0014
|
|
|
-+
|
|
|
-+#define AR2315_REV_MAJ 0x000000f0
|
|
|
-+#define AR2315_REV_MAJ_S 4
|
|
|
-+#define AR2315_REV_MIN 0x0000000f
|
|
|
-+#define AR2315_REV_MIN_S 0
|
|
|
-+#define AR2315_REV_CHIP (AR2315_REV_MAJ | AR2315_REV_MIN)
|
|
|
-+
|
|
|
-+/* Interface Enable */
|
|
|
-+#define AR2315_IF_CTL 0x0018
|
|
|
-+
|
|
|
-+#define AR2315_IF_MASK 0x00000007
|
|
|
-+#define AR2315_IF_DISABLED 0 /* Disable all */
|
|
|
-+#define AR2315_IF_PCI 1 /* PCI */
|
|
|
-+#define AR2315_IF_TS_LOCAL 2 /* Local bus */
|
|
|
-+#define AR2315_IF_ALL 3 /* Emulation only */
|
|
|
-+#define AR2315_IF_LOCAL_HOST 0x00000008
|
|
|
-+#define AR2315_IF_PCI_HOST 0x00000010
|
|
|
-+#define AR2315_IF_PCI_INTR 0x00000020
|
|
|
-+#define AR2315_IF_PCI_CLK_MASK 0x00030000
|
|
|
-+#define AR2315_IF_PCI_CLK_INPUT 0
|
|
|
-+#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1
|
|
|
-+#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2
|
|
|
-+#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3
|
|
|
-+#define AR2315_IF_PCI_CLK_SHIFT 16
|
|
|
-+
|
|
|
-+/* APB Interrupt control */
|
|
|
-+#define AR2315_ISR 0x0020
|
|
|
-+#define AR2315_IMR 0x0024
|
|
|
-+#define AR2315_GISR 0x0028
|
|
|
-+
|
|
|
-+#define AR2315_ISR_UART0 0x00000001 /* high speed UART */
|
|
|
-+#define AR2315_ISR_I2C_RSVD 0x00000002 /* I2C bus */
|
|
|
-+#define AR2315_ISR_SPI 0x00000004 /* SPI bus */
|
|
|
-+#define AR2315_ISR_AHB 0x00000008 /* AHB error */
|
|
|
-+#define AR2315_ISR_APB 0x00000010 /* APB error */
|
|
|
-+#define AR2315_ISR_TIMER 0x00000020 /* Timer */
|
|
|
-+#define AR2315_ISR_GPIO 0x00000040 /* GPIO */
|
|
|
-+#define AR2315_ISR_WD 0x00000080 /* Watchdog */
|
|
|
-+#define AR2315_ISR_IR_RSVD 0x00000100 /* IR */
|
|
|
-+
|
|
|
-+#define AR2315_GISR_MISC 0x00000001 /* Misc */
|
|
|
-+#define AR2315_GISR_WLAN0 0x00000002 /* WLAN0 */
|
|
|
-+#define AR2315_GISR_MPEGTS_RSVD 0x00000004 /* MPEG-TS */
|
|
|
-+#define AR2315_GISR_LOCALPCI 0x00000008 /* Local/PCI bus */
|
|
|
-+#define AR2315_GISR_WMACPOLL 0x00000010
|
|
|
-+#define AR2315_GISR_TIMER 0x00000020
|
|
|
-+#define AR2315_GISR_ETHERNET 0x00000040 /* Ethernet */
|
|
|
-+
|
|
|
-+/* Generic timer */
|
|
|
-+#define AR2315_TIMER 0x0030
|
|
|
-+#define AR2315_RELOAD 0x0034
|
|
|
-+
|
|
|
-+/* Watchdog timer */
|
|
|
-+#define AR2315_WDT_TIMER 0x0038
|
|
|
-+#define AR2315_WDT_CTRL 0x003c
|
|
|
-+
|
|
|
-+#define AR2315_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */
|
|
|
-+#define AR2315_WDT_CTRL_NMI 0x00000001 /* NMI on watchdog */
|
|
|
-+#define AR2315_WDT_CTRL_RESET 0x00000002 /* reset on watchdog */
|
|
|
-+
|
|
|
-+/* CPU Performance Counters */
|
|
|
-+#define AR2315_PERFCNT0 0x0048
|
|
|
-+#define AR2315_PERFCNT1 0x004c
|
|
|
-+
|
|
|
-+#define AR2315_PERF0_DATAHIT 0x00000001 /* Count Data Cache Hits */
|
|
|
-+#define AR2315_PERF0_DATAMISS 0x00000002 /* Count Data Cache Misses */
|
|
|
-+#define AR2315_PERF0_INSTHIT 0x00000004 /* Count Instruction Cache Hits */
|
|
|
-+#define AR2315_PERF0_INSTMISS 0x00000008 /* Count Instruction Cache Misses */
|
|
|
-+#define AR2315_PERF0_ACTIVE 0x00000010 /* Count Active Processor Cycles */
|
|
|
-+#define AR2315_PERF0_WBHIT 0x00000020 /* Count CPU Write Buffer Hits */
|
|
|
-+#define AR2315_PERF0_WBMISS 0x00000040 /* Count CPU Write Buffer Misses */
|
|
|
-+
|
|
|
-+#define AR2315_PERF1_EB_ARDY 0x00000001 /* Count EB_ARdy signal */
|
|
|
-+#define AR2315_PERF1_EB_AVALID 0x00000002 /* Count EB_AValid signal */
|
|
|
-+#define AR2315_PERF1_EB_WDRDY 0x00000004 /* Count EB_WDRdy signal */
|
|
|
-+#define AR2315_PERF1_EB_RDVAL 0x00000008 /* Count EB_RdVal signal */
|
|
|
-+#define AR2315_PERF1_VRADDR 0x00000010 /* Count valid read address cycles*/
|
|
|
-+#define AR2315_PERF1_VWADDR 0x00000020 /* Count valid write address cycl.*/
|
|
|
-+#define AR2315_PERF1_VWDATA 0x00000040 /* Count valid write data cycles */
|
|
|
-+
|
|
|
-+/* AHB Error Reporting */
|
|
|
-+#define AR2315_AHB_ERR0 0x0050 /* error */
|
|
|
-+#define AR2315_AHB_ERR1 0x0054 /* haddr */
|
|
|
-+#define AR2315_AHB_ERR2 0x0058 /* hwdata */
|
|
|
-+#define AR2315_AHB_ERR3 0x005c /* hrdata */
|
|
|
-+#define AR2315_AHB_ERR4 0x0060 /* status */
|
|
|
-+
|
|
|
-+#define AR2315_AHB_ERROR_DET 1 /* AHB Error has been detected, */
|
|
|
-+ /* write 1 to clear all bits in ERR0 */
|
|
|
-+#define AR2315_AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */
|
|
|
-+#define AR2315_AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */
|
|
|
-+
|
|
|
-+#define AR2315_PROCERR_HMAST 0x0000000f
|
|
|
-+#define AR2315_PROCERR_HMAST_DFLT 0
|
|
|
-+#define AR2315_PROCERR_HMAST_WMAC 1
|
|
|
-+#define AR2315_PROCERR_HMAST_ENET 2
|
|
|
-+#define AR2315_PROCERR_HMAST_PCIENDPT 3
|
|
|
-+#define AR2315_PROCERR_HMAST_LOCAL 4
|
|
|
-+#define AR2315_PROCERR_HMAST_CPU 5
|
|
|
-+#define AR2315_PROCERR_HMAST_PCITGT 6
|
|
|
-+#define AR2315_PROCERR_HMAST_S 0
|
|
|
-+#define AR2315_PROCERR_HWRITE 0x00000010
|
|
|
-+#define AR2315_PROCERR_HSIZE 0x00000060
|
|
|
-+#define AR2315_PROCERR_HSIZE_S 5
|
|
|
-+#define AR2315_PROCERR_HTRANS 0x00000180
|
|
|
-+#define AR2315_PROCERR_HTRANS_S 7
|
|
|
-+#define AR2315_PROCERR_HBURST 0x00000e00
|
|
|
-+#define AR2315_PROCERR_HBURST_S 9
|
|
|
-+
|
|
|
-+/* Clock Control */
|
|
|
-+#define AR2315_PLLC_CTL 0x0064
|
|
|
-+#define AR2315_PLLV_CTL 0x0068
|
|
|
-+#define AR2315_CPUCLK 0x006c
|
|
|
-+#define AR2315_AMBACLK 0x0070
|
|
|
-+#define AR2315_SYNCCLK 0x0074
|
|
|
-+#define AR2315_DSL_SLEEP_CTL 0x0080
|
|
|
-+#define AR2315_DSL_SLEEP_DUR 0x0084
|
|
|
-+
|
|
|
-+/* PLLc Control fields */
|
|
|
-+#define AR2315_PLLC_REF_DIV_M 0x00000003
|
|
|
-+#define AR2315_PLLC_REF_DIV_S 0
|
|
|
-+#define AR2315_PLLC_FDBACK_DIV_M 0x0000007c
|
|
|
-+#define AR2315_PLLC_FDBACK_DIV_S 2
|
|
|
-+#define AR2315_PLLC_ADD_FDBACK_DIV_M 0x00000080
|
|
|
-+#define AR2315_PLLC_ADD_FDBACK_DIV_S 7
|
|
|
-+#define AR2315_PLLC_CLKC_DIV_M 0x0001c000
|
|
|
-+#define AR2315_PLLC_CLKC_DIV_S 14
|
|
|
-+#define AR2315_PLLC_CLKM_DIV_M 0x00700000
|
|
|
-+#define AR2315_PLLC_CLKM_DIV_S 20
|
|
|
-+
|
|
|
-+/* CPU CLK Control fields */
|
|
|
-+#define AR2315_CPUCLK_CLK_SEL_M 0x00000003
|
|
|
-+#define AR2315_CPUCLK_CLK_SEL_S 0
|
|
|
-+#define AR2315_CPUCLK_CLK_DIV_M 0x0000000c
|
|
|
-+#define AR2315_CPUCLK_CLK_DIV_S 2
|
|
|
-+
|
|
|
-+/* AMBA CLK Control fields */
|
|
|
-+#define AR2315_AMBACLK_CLK_SEL_M 0x00000003
|
|
|
-+#define AR2315_AMBACLK_CLK_SEL_S 0
|
|
|
-+#define AR2315_AMBACLK_CLK_DIV_M 0x0000000c
|
|
|
-+#define AR2315_AMBACLK_CLK_DIV_S 2
|
|
|
-+
|
|
|
-+/* PCI Clock Control */
|
|
|
-+#define AR2315_PCICLK 0x00a4
|
|
|
-+
|
|
|
-+#define AR2315_PCICLK_INPUT_M 0x00000003
|
|
|
-+#define AR2315_PCICLK_INPUT_S 0
|
|
|
-+#define AR2315_PCICLK_PLLC_CLKM 0
|
|
|
-+#define AR2315_PCICLK_PLLC_CLKM1 1
|
|
|
-+#define AR2315_PCICLK_PLLC_CLKC 2
|
|
|
-+#define AR2315_PCICLK_REF_CLK 3
|
|
|
-+#define AR2315_PCICLK_DIV_M 0x0000000c
|
|
|
-+#define AR2315_PCICLK_DIV_S 2
|
|
|
-+#define AR2315_PCICLK_IN_FREQ 0
|
|
|
-+#define AR2315_PCICLK_IN_FREQ_DIV_6 1
|
|
|
-+#define AR2315_PCICLK_IN_FREQ_DIV_8 2
|
|
|
-+#define AR2315_PCICLK_IN_FREQ_DIV_10 3
|
|
|
-+
|
|
|
-+/* Observation Control Register */
|
|
|
-+#define AR2315_OCR 0x00b0
|
|
|
-+
|
|
|
-+#define AR2315_OCR_GPIO0_IRIN 0x00000040
|
|
|
-+#define AR2315_OCR_GPIO1_IROUT 0x00000080
|
|
|
-+#define AR2315_OCR_GPIO3_RXCLR 0x00000200
|
|
|
-+
|
|
|
-+/* General Clock Control */
|
|
|
-+#define AR2315_MISCCLK 0x00b4
|
|
|
-+
|
|
|
-+#define AR2315_MISCCLK_PLLBYPASS_EN 0x00000001
|
|
|
-+#define AR2315_MISCCLK_PROCREFCLK 0x00000002
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * SDRAM Controller
|
|
|
-+ * - No read or write buffers are included.
|
|
|
-+ */
|
|
|
-+#define AR2315_MEM_CFG 0x0000
|
|
|
-+#define AR2315_MEM_CTRL 0x000c
|
|
|
-+#define AR2315_MEM_REF 0x0010
|
|
|
-+
|
|
|
-+#define AR2315_MEM_CFG_DATA_WIDTH_M 0x00006000
|
|
|
-+#define AR2315_MEM_CFG_DATA_WIDTH_S 13
|
|
|
-+#define AR2315_MEM_CFG_COL_WIDTH_M 0x00001e00
|
|
|
-+#define AR2315_MEM_CFG_COL_WIDTH_S 9
|
|
|
-+#define AR2315_MEM_CFG_ROW_WIDTH_M 0x000001e0
|
|
|
-+#define AR2315_MEM_CFG_ROW_WIDTH_S 5
|
|
|
-+#define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018
|
|
|
-+#define AR2315_MEM_CFG_BANKADDR_BITS_S 3
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Local Bus Interface Registers
|
|
|
-+ */
|
|
|
-+#define AR2315_LB_CONFIG 0x0000
|
|
|
-+
|
|
|
-+#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */
|
|
|
-+#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */
|
|
|
-+#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */
|
|
|
-+#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */
|
|
|
-+#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */
|
|
|
-+#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */
|
|
|
-+#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */
|
|
|
-+#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */
|
|
|
-+#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */
|
|
|
-+#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */
|
|
|
-+#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */
|
|
|
-+#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */
|
|
|
-+#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */
|
|
|
-+#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */
|
|
|
-+#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */
|
|
|
-+#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */
|
|
|
-+#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */
|
|
|
-+#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */
|
|
|
-+#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */
|
|
|
-+#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */
|
|
|
-+#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */
|
|
|
-+#define AR2315_LBCONF_INT_CTR3 0x000c0000 /* GND drive, Vdd drive */
|
|
|
-+#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */
|
|
|
-+#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */
|
|
|
-+#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */
|
|
|
-+
|
|
|
-+#define AR2315_LB_CLKSEL 0x0004
|
|
|
-+
|
|
|
-+#define AR2315_LBCLK_EXT 0x00000001 /* use external clk for lb */
|
|
|
-+
|
|
|
-+#define AR2315_LB_1MS 0x0008
|
|
|
-+
|
|
|
-+#define AR2315_LB1MS_MASK 0x0003ffff /* # of AHB clk cycles in 1ms */
|
|
|
-+
|
|
|
-+#define AR2315_LB_MISCCFG 0x000c
|
|
|
-+
|
|
|
-+#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */
|
|
|
-+#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */
|
|
|
-+#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */
|
|
|
-+#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */
|
|
|
-+#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */
|
|
|
-+#define AR2315_LBM_TIMEOUT_M 0x00ffff80
|
|
|
-+#define AR2315_LBM_TIMEOUT_S 7
|
|
|
-+#define AR2315_LBM_PORTMUX 0x07000000
|
|
|
-+
|
|
|
-+#define AR2315_LB_RXTSOFF 0x0010
|
|
|
-+
|
|
|
-+#define AR2315_LB_TX_CHAIN_EN 0x0100
|
|
|
-+
|
|
|
-+#define AR2315_LB_TXEN_0 0x00000001
|
|
|
-+#define AR2315_LB_TXEN_1 0x00000002
|
|
|
-+#define AR2315_LB_TXEN_2 0x00000004
|
|
|
-+#define AR2315_LB_TXEN_3 0x00000008
|
|
|
-+
|
|
|
-+#define AR2315_LB_TX_CHAIN_DIS 0x0104
|
|
|
-+#define AR2315_LB_TX_DESC_PTR 0x0200
|
|
|
-+
|
|
|
-+#define AR2315_LB_RX_CHAIN_EN 0x0400
|
|
|
-+
|
|
|
-+#define AR2315_LB_RXEN 0x00000001
|
|
|
-+
|
|
|
-+#define AR2315_LB_RX_CHAIN_DIS 0x0404
|
|
|
-+#define AR2315_LB_RX_DESC_PTR 0x0408
|
|
|
-+
|
|
|
-+#define AR2315_LB_INT_STATUS 0x0500
|
|
|
-+
|
|
|
-+#define AR2315_LB_INT_TX_DESC 0x00000001
|
|
|
-+#define AR2315_LB_INT_TX_OK 0x00000002
|
|
|
-+#define AR2315_LB_INT_TX_ERR 0x00000004
|
|
|
-+#define AR2315_LB_INT_TX_EOF 0x00000008
|
|
|
-+#define AR2315_LB_INT_RX_DESC 0x00000010
|
|
|
-+#define AR2315_LB_INT_RX_OK 0x00000020
|
|
|
-+#define AR2315_LB_INT_RX_ERR 0x00000040
|
|
|
-+#define AR2315_LB_INT_RX_EOF 0x00000080
|
|
|
-+#define AR2315_LB_INT_TX_TRUNC 0x00000100
|
|
|
-+#define AR2315_LB_INT_TX_STARVE 0x00000200
|
|
|
-+#define AR2315_LB_INT_LB_TIMEOUT 0x00000400
|
|
|
-+#define AR2315_LB_INT_LB_ERR 0x00000800
|
|
|
-+#define AR2315_LB_INT_MBOX_WR 0x00001000
|
|
|
-+#define AR2315_LB_INT_MBOX_RD 0x00002000
|
|
|
-+
|
|
|
-+/* Bit definitions for INT MASK are the same as INT_STATUS */
|
|
|
-+#define AR2315_LB_INT_MASK 0x0504
|
|
|
-+
|
|
|
-+#define AR2315_LB_INT_EN 0x0508
|
|
|
-+#define AR2315_LB_MBOX 0x0600
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar5312_regs.h
|
|
|
-@@ -0,0 +1,224 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006 Felix Fietkau <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#ifndef __ASM_MACH_ATH25_AR5312_REGS_H
|
|
|
-+#define __ASM_MACH_ATH25_AR5312_REGS_H
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * IRQs
|
|
|
-+ */
|
|
|
-+#define AR5312_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */
|
|
|
-+#define AR5312_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */
|
|
|
-+#define AR5312_IRQ_ENET1 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */
|
|
|
-+#define AR5312_IRQ_WLAN1 (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */
|
|
|
-+#define AR5312_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Miscellaneous interrupts, which share IP6.
|
|
|
-+ */
|
|
|
-+#define AR5312_MISC_IRQ_TIMER 0
|
|
|
-+#define AR5312_MISC_IRQ_AHB_PROC 1
|
|
|
-+#define AR5312_MISC_IRQ_AHB_DMA 2
|
|
|
-+#define AR5312_MISC_IRQ_GPIO 3
|
|
|
-+#define AR5312_MISC_IRQ_UART0 4
|
|
|
-+#define AR5312_MISC_IRQ_UART0_DMA 5
|
|
|
-+#define AR5312_MISC_IRQ_WATCHDOG 6
|
|
|
-+#define AR5312_MISC_IRQ_LOCAL 7
|
|
|
-+#define AR5312_MISC_IRQ_SPI 8
|
|
|
-+#define AR5312_MISC_IRQ_COUNT 9
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Address Map
|
|
|
-+ *
|
|
|
-+ * The AR5312 supports 2 enet MACS, even though many reference boards only
|
|
|
-+ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet
|
|
|
-+ * PHY or PHY switch. The AR2312 supports 1 enet MAC.
|
|
|
-+ */
|
|
|
-+#define AR5312_WLAN0_BASE 0x18000000
|
|
|
-+#define AR5312_ENET0_BASE 0x18100000
|
|
|
-+#define AR5312_ENET1_BASE 0x18200000
|
|
|
-+#define AR5312_SDRAMCTL_BASE 0x18300000
|
|
|
-+#define AR5312_SDRAMCTL_SIZE 0x00000010
|
|
|
-+#define AR5312_FLASHCTL_BASE 0x18400000
|
|
|
-+#define AR5312_FLASHCTL_SIZE 0x00000010
|
|
|
-+#define AR5312_WLAN1_BASE 0x18500000
|
|
|
-+#define AR5312_UART0_BASE 0x1c000000 /* UART MMR */
|
|
|
-+#define AR5312_GPIO_BASE 0x1c002000
|
|
|
-+#define AR5312_GPIO_SIZE 0x00000010
|
|
|
-+#define AR5312_RST_BASE 0x1c003000
|
|
|
-+#define AR5312_RST_SIZE 0x00000100
|
|
|
-+#define AR5312_FLASH_BASE 0x1e000000
|
|
|
-+#define AR5312_FLASH_SIZE 0x00800000
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Need these defines to determine true number of ethernet MACs
|
|
|
-+ */
|
|
|
-+#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */
|
|
|
-+#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */
|
|
|
-+#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */
|
|
|
-+
|
|
|
-+/* Reset/Timer Block Address Map */
|
|
|
-+#define AR5312_TIMER 0x0000 /* countdown timer */
|
|
|
-+#define AR5312_RELOAD 0x0004 /* timer reload value */
|
|
|
-+#define AR5312_WDT_CTRL 0x0008 /* watchdog cntrl */
|
|
|
-+#define AR5312_WDT_TIMER 0x000c /* watchdog timer */
|
|
|
-+#define AR5312_ISR 0x0010 /* Intr Status Reg */
|
|
|
-+#define AR5312_IMR 0x0014 /* Intr Mask Reg */
|
|
|
-+#define AR5312_RESET 0x0020
|
|
|
-+#define AR5312_CLOCKCTL1 0x0064
|
|
|
-+#define AR5312_SCRATCH 0x006c
|
|
|
-+#define AR5312_PROCADDR 0x0070
|
|
|
-+#define AR5312_PROC1 0x0074
|
|
|
-+#define AR5312_DMAADDR 0x0078
|
|
|
-+#define AR5312_DMA1 0x007c
|
|
|
-+#define AR5312_ENABLE 0x0080 /* interface enb */
|
|
|
-+#define AR5312_REV 0x0090 /* revision */
|
|
|
-+
|
|
|
-+/* AR5312_WDT_CTRL register bit field definitions */
|
|
|
-+#define AR5312_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */
|
|
|
-+#define AR5312_WDT_CTRL_NMI 0x00000001
|
|
|
-+#define AR5312_WDT_CTRL_RESET 0x00000002
|
|
|
-+
|
|
|
-+/* AR5312_ISR register bit field definitions */
|
|
|
-+#define AR5312_ISR_TIMER 0x00000001
|
|
|
-+#define AR5312_ISR_AHBPROC 0x00000002
|
|
|
-+#define AR5312_ISR_AHBDMA 0x00000004
|
|
|
-+#define AR5312_ISR_GPIO 0x00000008
|
|
|
-+#define AR5312_ISR_UART0 0x00000010
|
|
|
-+#define AR5312_ISR_UART0DMA 0x00000020
|
|
|
-+#define AR5312_ISR_WD 0x00000040
|
|
|
-+#define AR5312_ISR_LOCAL 0x00000080
|
|
|
-+
|
|
|
-+/* AR5312_RESET register bit field definitions */
|
|
|
-+#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */
|
|
|
-+#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */
|
|
|
-+#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */
|
|
|
-+#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */
|
|
|
-+#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */
|
|
|
-+#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */
|
|
|
-+#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */
|
|
|
-+#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */
|
|
|
-+#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */
|
|
|
-+#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */
|
|
|
-+#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */
|
|
|
-+#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */
|
|
|
-+#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */
|
|
|
-+#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */
|
|
|
-+#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */
|
|
|
-+#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */
|
|
|
-+#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */
|
|
|
-+#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */
|
|
|
-+
|
|
|
-+#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\
|
|
|
-+ AR5312_RESET_WARM_WLAN0_MAC |\
|
|
|
-+ AR5312_RESET_WARM_WLAN0_BB)
|
|
|
-+
|
|
|
-+#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\
|
|
|
-+ AR5312_RESET_WARM_WLAN1_MAC |\
|
|
|
-+ AR5312_RESET_WARM_WLAN1_BB)
|
|
|
-+
|
|
|
-+/* AR5312_CLOCKCTL1 register bit field definitions */
|
|
|
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
|
|
|
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
|
|
|
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
|
|
|
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
|
|
|
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
|
|
|
-+
|
|
|
-+/* Valid for AR5312 and AR2312 */
|
|
|
-+#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030
|
|
|
-+#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4
|
|
|
-+#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00
|
|
|
-+#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8
|
|
|
-+#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000
|
|
|
-+
|
|
|
-+/* Valid for AR2313 */
|
|
|
-+#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000
|
|
|
-+#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12
|
|
|
-+#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000
|
|
|
-+#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16
|
|
|
-+#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000
|
|
|
-+
|
|
|
-+/* AR5312_ENABLE register bit field definitions */
|
|
|
-+#define AR5312_ENABLE_WLAN0 0x00000001
|
|
|
-+#define AR5312_ENABLE_ENET0 0x00000002
|
|
|
-+#define AR5312_ENABLE_ENET1 0x00000004
|
|
|
-+#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */
|
|
|
-+#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */
|
|
|
-+#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\
|
|
|
-+ AR5312_ENABLE_WLAN1_DMA)
|
|
|
-+
|
|
|
-+/* AR5312_REV register bit field definitions */
|
|
|
-+#define AR5312_REV_WMAC_MAJ 0x0000f000
|
|
|
-+#define AR5312_REV_WMAC_MAJ_S 12
|
|
|
-+#define AR5312_REV_WMAC_MIN 0x00000f00
|
|
|
-+#define AR5312_REV_WMAC_MIN_S 8
|
|
|
-+#define AR5312_REV_MAJ 0x000000f0
|
|
|
-+#define AR5312_REV_MAJ_S 4
|
|
|
-+#define AR5312_REV_MIN 0x0000000f
|
|
|
-+#define AR5312_REV_MIN_S 0
|
|
|
-+#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN)
|
|
|
-+
|
|
|
-+/* Major revision numbers, bits 7..4 of Revision ID register */
|
|
|
-+#define AR5312_REV_MAJ_AR5312 0x4
|
|
|
-+#define AR5312_REV_MAJ_AR2313 0x5
|
|
|
-+
|
|
|
-+/* Minor revision numbers, bits 3..0 of Revision ID register */
|
|
|
-+#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */
|
|
|
-+#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices
|
|
|
-+ */
|
|
|
-+#define AR5312_FLASHCTL0 0x0000
|
|
|
-+#define AR5312_FLASHCTL1 0x0004
|
|
|
-+#define AR5312_FLASHCTL2 0x0008
|
|
|
-+
|
|
|
-+/* AR5312_FLASHCTL register bit field definitions */
|
|
|
-+#define AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */
|
|
|
-+#define AR5312_FLASHCTL_IDCY_S 0
|
|
|
-+#define AR5312_FLASHCTL_WST1 0x000003e0 /* Wait state 1 */
|
|
|
-+#define AR5312_FLASHCTL_WST1_S 5
|
|
|
-+#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */
|
|
|
-+#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */
|
|
|
-+#define AR5312_FLASHCTL_WST2_S 11
|
|
|
-+#define AR5312_FLASHCTL_AC 0x00070000 /* Flash addr check (added) */
|
|
|
-+#define AR5312_FLASHCTL_AC_S 16
|
|
|
-+#define AR5312_FLASHCTL_AC_128K 0x00000000
|
|
|
-+#define AR5312_FLASHCTL_AC_256K 0x00010000
|
|
|
-+#define AR5312_FLASHCTL_AC_512K 0x00020000
|
|
|
-+#define AR5312_FLASHCTL_AC_1M 0x00030000
|
|
|
-+#define AR5312_FLASHCTL_AC_2M 0x00040000
|
|
|
-+#define AR5312_FLASHCTL_AC_4M 0x00050000
|
|
|
-+#define AR5312_FLASHCTL_AC_8M 0x00060000
|
|
|
-+#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */
|
|
|
-+#define AR5312_FLASHCTL_E 0x00080000 /* Flash bank enable (added) */
|
|
|
-+#define AR5312_FLASHCTL_BUSERR 0x01000000 /* Bus transfer error flag */
|
|
|
-+#define AR5312_FLASHCTL_WPERR 0x02000000 /* Write protect error flag */
|
|
|
-+#define AR5312_FLASHCTL_WP 0x04000000 /* Write protect */
|
|
|
-+#define AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */
|
|
|
-+#define AR5312_FLASHCTL_MW 0x30000000 /* Mem width */
|
|
|
-+#define AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */
|
|
|
-+#define AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */
|
|
|
-+#define AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */
|
|
|
-+#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */
|
|
|
-+#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */
|
|
|
-+#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * ARM SDRAM Controller -- just enough to determine memory size
|
|
|
-+ */
|
|
|
-+#define AR5312_MEM_CFG1 0x0004
|
|
|
-+
|
|
|
-+#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */
|
|
|
-+#define AR5312_MEM_CFG1_AC0_S 8
|
|
|
-+#define AR5312_MEM_CFG1_AC1_M 0x00007000 /* bank 1: SDRAM addr check */
|
|
|
-+#define AR5312_MEM_CFG1_AC1_S 12
|
|
|
-+
|
|
|
-+#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar5312.c
|
|
|
-@@ -0,0 +1,393 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 FON Technology, SL.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006-2009 Felix Fietkau <[email protected]>
|
|
|
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Platform devices for Atheros AR5312 SoCs
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <linux/kernel.h>
|
|
|
-+#include <linux/bitops.h>
|
|
|
-+#include <linux/irqdomain.h>
|
|
|
-+#include <linux/interrupt.h>
|
|
|
-+#include <linux/platform_device.h>
|
|
|
-+#include <linux/mtd/physmap.h>
|
|
|
-+#include <linux/reboot.h>
|
|
|
-+#include <asm/bootinfo.h>
|
|
|
-+#include <asm/reboot.h>
|
|
|
-+#include <asm/time.h>
|
|
|
-+
|
|
|
-+#include <ath25_platform.h>
|
|
|
-+
|
|
|
-+#include "devices.h"
|
|
|
-+#include "ar5312.h"
|
|
|
-+#include "ar5312_regs.h"
|
|
|
-+
|
|
|
-+static void __iomem *ar5312_rst_base;
|
|
|
-+static struct irq_domain *ar5312_misc_irq_domain;
|
|
|
-+
|
|
|
-+static inline u32 ar5312_rst_reg_read(u32 reg)
|
|
|
-+{
|
|
|
-+ return __raw_readl(ar5312_rst_base + reg);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void ar5312_rst_reg_write(u32 reg, u32 val)
|
|
|
-+{
|
|
|
-+ __raw_writel(val, ar5312_rst_base + reg);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val)
|
|
|
-+{
|
|
|
-+ u32 ret = ar5312_rst_reg_read(reg);
|
|
|
-+
|
|
|
-+ ret &= ~mask;
|
|
|
-+ ret |= val;
|
|
|
-+ ar5312_rst_reg_write(reg, ret);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id)
|
|
|
-+{
|
|
|
-+ u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1);
|
|
|
-+ u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */
|
|
|
-+ u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1);
|
|
|
-+ u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */
|
|
|
-+
|
|
|
-+ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n",
|
|
|
-+ proc_addr, proc1, dma_addr, dma1);
|
|
|
-+
|
|
|
-+ machine_restart("AHB error"); /* Catastrophic failure */
|
|
|
-+ return IRQ_HANDLED;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irqaction ar5312_ahb_err_interrupt = {
|
|
|
-+ .handler = ar5312_ahb_err_handler,
|
|
|
-+ .name = "ar5312-ahb-error",
|
|
|
-+};
|
|
|
-+
|
|
|
-+static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc)
|
|
|
-+{
|
|
|
-+ u32 pending = ar5312_rst_reg_read(AR5312_ISR) &
|
|
|
-+ ar5312_rst_reg_read(AR5312_IMR);
|
|
|
-+ unsigned nr, misc_irq = 0;
|
|
|
-+
|
|
|
-+ if (pending) {
|
|
|
-+ struct irq_domain *domain = irq_get_handler_data(irq);
|
|
|
-+
|
|
|
-+ nr = __ffs(pending);
|
|
|
-+ misc_irq = irq_find_mapping(domain, nr);
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ if (misc_irq) {
|
|
|
-+ generic_handle_irq(misc_irq);
|
|
|
-+ if (nr == AR5312_MISC_IRQ_TIMER)
|
|
|
-+ ar5312_rst_reg_read(AR5312_TIMER);
|
|
|
-+ } else {
|
|
|
-+ spurious_interrupt();
|
|
|
-+ }
|
|
|
-+}
|
|
|
-+
|
|
|
-+/* Enable the specified AR5312_MISC_IRQ interrupt */
|
|
|
-+static void ar5312_misc_irq_unmask(struct irq_data *d)
|
|
|
-+{
|
|
|
-+ ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq));
|
|
|
-+}
|
|
|
-+
|
|
|
-+/* Disable the specified AR5312_MISC_IRQ interrupt */
|
|
|
-+static void ar5312_misc_irq_mask(struct irq_data *d)
|
|
|
-+{
|
|
|
-+ ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0);
|
|
|
-+ ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irq_chip ar5312_misc_irq_chip = {
|
|
|
-+ .name = "ar5312-misc",
|
|
|
-+ .irq_unmask = ar5312_misc_irq_unmask,
|
|
|
-+ .irq_mask = ar5312_misc_irq_mask,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq,
|
|
|
-+ irq_hw_number_t hw)
|
|
|
-+{
|
|
|
-+ irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq);
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irq_domain_ops ar5312_misc_irq_domain_ops = {
|
|
|
-+ .map = ar5312_misc_irq_map,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static void ar5312_irq_dispatch(void)
|
|
|
-+{
|
|
|
-+ u32 pending = read_c0_status() & read_c0_cause();
|
|
|
-+
|
|
|
-+ if (pending & CAUSEF_IP2)
|
|
|
-+ do_IRQ(AR5312_IRQ_WLAN0);
|
|
|
-+ else if (pending & CAUSEF_IP5)
|
|
|
-+ do_IRQ(AR5312_IRQ_WLAN1);
|
|
|
-+ else if (pending & CAUSEF_IP6)
|
|
|
-+ do_IRQ(AR5312_IRQ_MISC);
|
|
|
-+ else if (pending & CAUSEF_IP7)
|
|
|
-+ do_IRQ(ATH25_IRQ_CPU_CLOCK);
|
|
|
-+ else
|
|
|
-+ spurious_interrupt();
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar5312_arch_init_irq(void)
|
|
|
-+{
|
|
|
-+ struct irq_domain *domain;
|
|
|
-+ unsigned irq;
|
|
|
-+
|
|
|
-+ ath25_irq_dispatch = ar5312_irq_dispatch;
|
|
|
-+
|
|
|
-+ domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT,
|
|
|
-+ &ar5312_misc_irq_domain_ops, NULL);
|
|
|
-+ if (!domain)
|
|
|
-+ panic("Failed to add IRQ domain");
|
|
|
-+
|
|
|
-+ irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC);
|
|
|
-+ setup_irq(irq, &ar5312_ahb_err_interrupt);
|
|
|
-+
|
|
|
-+ irq_set_chained_handler(AR5312_IRQ_MISC, ar5312_misc_irq_handler);
|
|
|
-+ irq_set_handler_data(AR5312_IRQ_MISC, domain);
|
|
|
-+
|
|
|
-+ ar5312_misc_irq_domain = domain;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct physmap_flash_data ar5312_flash_data = {
|
|
|
-+ .width = 2,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct resource ar5312_flash_resource = {
|
|
|
-+ .start = AR5312_FLASH_BASE,
|
|
|
-+ .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1,
|
|
|
-+ .flags = IORESOURCE_MEM,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct platform_device ar5312_physmap_flash = {
|
|
|
-+ .name = "physmap-flash",
|
|
|
-+ .id = 0,
|
|
|
-+ .dev.platform_data = &ar5312_flash_data,
|
|
|
-+ .resource = &ar5312_flash_resource,
|
|
|
-+ .num_resources = 1,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static void __init ar5312_flash_init(void)
|
|
|
-+{
|
|
|
-+ void __iomem *flashctl_base;
|
|
|
-+ u32 ctl;
|
|
|
-+
|
|
|
-+ flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE,
|
|
|
-+ AR5312_FLASHCTL_SIZE);
|
|
|
-+
|
|
|
-+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
|
|
|
-+ ctl &= AR5312_FLASHCTL_MW;
|
|
|
-+
|
|
|
-+ /* fixup flash width */
|
|
|
-+ switch (ctl) {
|
|
|
-+ case AR5312_FLASHCTL_MW16:
|
|
|
-+ ar5312_flash_data.width = 2;
|
|
|
-+ break;
|
|
|
-+ case AR5312_FLASHCTL_MW8:
|
|
|
-+ default:
|
|
|
-+ ar5312_flash_data.width = 1;
|
|
|
-+ break;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ /*
|
|
|
-+ * Configure flash bank 0.
|
|
|
-+ * Assume 8M window size. Flash will be aliased if it's smaller
|
|
|
-+ */
|
|
|
-+ ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE;
|
|
|
-+ ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S;
|
|
|
-+ ctl |= 0x07 << AR5312_FLASHCTL_WST1_S;
|
|
|
-+ ctl |= 0x07 << AR5312_FLASHCTL_WST2_S;
|
|
|
-+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0);
|
|
|
-+
|
|
|
-+ /* Disable other flash banks */
|
|
|
-+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1);
|
|
|
-+ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
|
|
|
-+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1);
|
|
|
-+ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2);
|
|
|
-+ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC);
|
|
|
-+ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2);
|
|
|
-+
|
|
|
-+ iounmap(flashctl_base);
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar5312_init_devices(void)
|
|
|
-+{
|
|
|
-+ struct ath25_boarddata *config;
|
|
|
-+
|
|
|
-+ ar5312_flash_init();
|
|
|
-+
|
|
|
-+ /* Locate board/radio config data */
|
|
|
-+ ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE);
|
|
|
-+ config = ath25_board.config;
|
|
|
-+
|
|
|
-+ /* AR2313 has CPU minor rev. 10 */
|
|
|
-+ if ((current_cpu_data.processor_id & 0xff) == 0x0a)
|
|
|
-+ ath25_soc = ATH25_SOC_AR2313;
|
|
|
-+
|
|
|
-+ /* AR2312 shares the same Silicon ID as AR5312 */
|
|
|
-+ else if (config->flags & BD_ISCASPER)
|
|
|
-+ ath25_soc = ATH25_SOC_AR2312;
|
|
|
-+
|
|
|
-+ /* Everything else is probably AR5312 or compatible */
|
|
|
-+ else
|
|
|
-+ ath25_soc = ATH25_SOC_AR5312;
|
|
|
-+
|
|
|
-+ platform_device_register(&ar5312_physmap_flash);
|
|
|
-+
|
|
|
-+ switch (ath25_soc) {
|
|
|
-+ case ATH25_SOC_AR5312:
|
|
|
-+ if (!ath25_board.radio)
|
|
|
-+ return;
|
|
|
-+
|
|
|
-+ if (!(config->flags & BD_WLAN0))
|
|
|
-+ break;
|
|
|
-+
|
|
|
-+ ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0);
|
|
|
-+ break;
|
|
|
-+ case ATH25_SOC_AR2312:
|
|
|
-+ case ATH25_SOC_AR2313:
|
|
|
-+ if (!ath25_board.radio)
|
|
|
-+ return;
|
|
|
-+ break;
|
|
|
-+ default:
|
|
|
-+ break;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ if (config->flags & BD_WLAN1)
|
|
|
-+ ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static void ar5312_restart(char *command)
|
|
|
-+{
|
|
|
-+ /* reset the system */
|
|
|
-+ local_irq_disable();
|
|
|
-+ while (1)
|
|
|
-+ ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM);
|
|
|
-+}
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
|
|
|
-+ * to determine the predevisor value.
|
|
|
-+ */
|
|
|
-+static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
|
|
|
-+
|
|
|
-+static unsigned __init ar5312_cpu_frequency(void)
|
|
|
-+{
|
|
|
-+ u32 scratch, devid, clock_ctl1;
|
|
|
-+ u32 predivide_mask, multiplier_mask, doubler_mask;
|
|
|
-+ unsigned predivide_shift, multiplier_shift;
|
|
|
-+ unsigned predivide_select, predivisor, multiplier;
|
|
|
-+
|
|
|
-+ /* Trust the bootrom's idea of cpu frequency. */
|
|
|
-+ scratch = ar5312_rst_reg_read(AR5312_SCRATCH);
|
|
|
-+ if (scratch)
|
|
|
-+ return scratch;
|
|
|
-+
|
|
|
-+ devid = ar5312_rst_reg_read(AR5312_REV);
|
|
|
-+ devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S;
|
|
|
-+ if (devid == AR5312_REV_MAJ_AR2313) {
|
|
|
-+ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK;
|
|
|
-+ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT;
|
|
|
-+ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK;
|
|
|
-+ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT;
|
|
|
-+ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK;
|
|
|
-+ } else { /* AR5312 and AR2312 */
|
|
|
-+ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK;
|
|
|
-+ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT;
|
|
|
-+ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK;
|
|
|
-+ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT;
|
|
|
-+ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ /*
|
|
|
-+ * Clocking is derived from a fixed 40MHz input clock.
|
|
|
-+ *
|
|
|
-+ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier)
|
|
|
-+ * sys_freq = cpu_freq / 4 (used for APB clock, serial,
|
|
|
-+ * flash, Timer, Watchdog Timer)
|
|
|
-+ *
|
|
|
-+ * cnt_freq = cpu_freq / 2 (use for CPU count/compare)
|
|
|
-+ *
|
|
|
-+ * So, for example, with a PLL multiplier of 5, we have
|
|
|
-+ *
|
|
|
-+ * cpu_freq = 200MHz
|
|
|
-+ * sys_freq = 50MHz
|
|
|
-+ * cnt_freq = 100MHz
|
|
|
-+ *
|
|
|
-+ * We compute the CPU frequency, based on PLL settings.
|
|
|
-+ */
|
|
|
-+
|
|
|
-+ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1);
|
|
|
-+ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift;
|
|
|
-+ predivisor = clockctl1_predivide_table[predivide_select];
|
|
|
-+ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift;
|
|
|
-+
|
|
|
-+ if (clock_ctl1 & doubler_mask)
|
|
|
-+ multiplier <<= 1;
|
|
|
-+
|
|
|
-+ return (40000000 / predivisor) * multiplier;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline unsigned ar5312_sys_frequency(void)
|
|
|
-+{
|
|
|
-+ return ar5312_cpu_frequency() / 4;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar5312_plat_time_init(void)
|
|
|
-+{
|
|
|
-+ mips_hpt_frequency = ar5312_cpu_frequency() / 2;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar5312_plat_mem_setup(void)
|
|
|
-+{
|
|
|
-+ void __iomem *sdram_base;
|
|
|
-+ u32 memsize, memcfg, bank0_ac, bank1_ac;
|
|
|
-+ u32 devid;
|
|
|
-+
|
|
|
-+ /* Detect memory size */
|
|
|
-+ sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE,
|
|
|
-+ AR5312_SDRAMCTL_SIZE);
|
|
|
-+ memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1);
|
|
|
-+ bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0);
|
|
|
-+ bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1);
|
|
|
-+ memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) +
|
|
|
-+ (bank1_ac ? (1 << (bank1_ac + 1)) : 0);
|
|
|
-+ memsize <<= 20;
|
|
|
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
|
-+ iounmap(sdram_base);
|
|
|
-+
|
|
|
-+ ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE);
|
|
|
-+
|
|
|
-+ devid = ar5312_rst_reg_read(AR5312_REV);
|
|
|
-+ devid >>= AR5312_REV_WMAC_MIN_S;
|
|
|
-+ devid &= AR5312_REV_CHIP;
|
|
|
-+ ath25_board.devid = (u16)devid;
|
|
|
-+
|
|
|
-+ /* Clear any lingering AHB errors */
|
|
|
-+ ar5312_rst_reg_read(AR5312_PROCADDR);
|
|
|
-+ ar5312_rst_reg_read(AR5312_DMAADDR);
|
|
|
-+ ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE);
|
|
|
-+
|
|
|
-+ _machine_restart = ar5312_restart;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar5312_arch_init(void)
|
|
|
-+{
|
|
|
-+ unsigned irq = irq_create_mapping(ar5312_misc_irq_domain,
|
|
|
-+ AR5312_MISC_IRQ_UART0);
|
|
|
-+
|
|
|
-+ ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency());
|
|
|
-+}
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar2315.c
|
|
|
-@@ -0,0 +1,308 @@
|
|
|
-+/*
|
|
|
-+ * This file is subject to the terms and conditions of the GNU General Public
|
|
|
-+ * License. See the file "COPYING" in the main directory of this archive
|
|
|
-+ * for more details.
|
|
|
-+ *
|
|
|
-+ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved.
|
|
|
-+ * Copyright (C) 2006 FON Technology, SL.
|
|
|
-+ * Copyright (C) 2006 Imre Kaloz <[email protected]>
|
|
|
-+ * Copyright (C) 2006 Felix Fietkau <[email protected]>
|
|
|
-+ * Copyright (C) 2012 Alexandros C. Couloumbis <[email protected]>
|
|
|
-+ */
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Platform devices for Atheros AR2315 SoCs
|
|
|
-+ */
|
|
|
-+
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <linux/kernel.h>
|
|
|
-+#include <linux/bitops.h>
|
|
|
-+#include <linux/irqdomain.h>
|
|
|
-+#include <linux/interrupt.h>
|
|
|
-+#include <linux/platform_device.h>
|
|
|
-+#include <linux/reboot.h>
|
|
|
-+#include <asm/bootinfo.h>
|
|
|
-+#include <asm/reboot.h>
|
|
|
-+#include <asm/time.h>
|
|
|
-+
|
|
|
-+#include <ath25_platform.h>
|
|
|
-+
|
|
|
-+#include "devices.h"
|
|
|
-+#include "ar2315.h"
|
|
|
-+#include "ar2315_regs.h"
|
|
|
-+
|
|
|
-+static void __iomem *ar2315_rst_base;
|
|
|
-+static struct irq_domain *ar2315_misc_irq_domain;
|
|
|
-+
|
|
|
-+static inline u32 ar2315_rst_reg_read(u32 reg)
|
|
|
-+{
|
|
|
-+ return __raw_readl(ar2315_rst_base + reg);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void ar2315_rst_reg_write(u32 reg, u32 val)
|
|
|
-+{
|
|
|
-+ __raw_writel(val, ar2315_rst_base + reg);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val)
|
|
|
-+{
|
|
|
-+ u32 ret = ar2315_rst_reg_read(reg);
|
|
|
-+
|
|
|
-+ ret &= ~mask;
|
|
|
-+ ret |= val;
|
|
|
-+ ar2315_rst_reg_write(reg, ret);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id)
|
|
|
-+{
|
|
|
-+ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
|
|
|
-+ ar2315_rst_reg_read(AR2315_AHB_ERR1);
|
|
|
-+
|
|
|
-+ pr_emerg("AHB fatal error\n");
|
|
|
-+ machine_restart("AHB error"); /* Catastrophic failure */
|
|
|
-+
|
|
|
-+ return IRQ_HANDLED;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irqaction ar2315_ahb_err_interrupt = {
|
|
|
-+ .handler = ar2315_ahb_err_handler,
|
|
|
-+ .name = "ar2315-ahb-error",
|
|
|
-+};
|
|
|
-+
|
|
|
-+static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc)
|
|
|
-+{
|
|
|
-+ u32 pending = ar2315_rst_reg_read(AR2315_ISR) &
|
|
|
-+ ar2315_rst_reg_read(AR2315_IMR);
|
|
|
-+ unsigned nr, misc_irq = 0;
|
|
|
-+
|
|
|
-+ if (pending) {
|
|
|
-+ struct irq_domain *domain = irq_get_handler_data(irq);
|
|
|
-+
|
|
|
-+ nr = __ffs(pending);
|
|
|
-+ misc_irq = irq_find_mapping(domain, nr);
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ if (misc_irq) {
|
|
|
-+ if (nr == AR2315_MISC_IRQ_GPIO)
|
|
|
-+ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO);
|
|
|
-+ else if (nr == AR2315_MISC_IRQ_WATCHDOG)
|
|
|
-+ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD);
|
|
|
-+ generic_handle_irq(misc_irq);
|
|
|
-+ } else {
|
|
|
-+ spurious_interrupt();
|
|
|
-+ }
|
|
|
-+}
|
|
|
-+
|
|
|
-+static void ar2315_misc_irq_unmask(struct irq_data *d)
|
|
|
-+{
|
|
|
-+ ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq));
|
|
|
-+}
|
|
|
-+
|
|
|
-+static void ar2315_misc_irq_mask(struct irq_data *d)
|
|
|
-+{
|
|
|
-+ ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irq_chip ar2315_misc_irq_chip = {
|
|
|
-+ .name = "ar2315-misc",
|
|
|
-+ .irq_unmask = ar2315_misc_irq_unmask,
|
|
|
-+ .irq_mask = ar2315_misc_irq_mask,
|
|
|
-+};
|
|
|
-+
|
|
|
-+static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq,
|
|
|
-+ irq_hw_number_t hw)
|
|
|
-+{
|
|
|
-+ irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq);
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+static struct irq_domain_ops ar2315_misc_irq_domain_ops = {
|
|
|
-+ .map = ar2315_misc_irq_map,
|
|
|
-+};
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * Called when an interrupt is received, this function
|
|
|
-+ * determines exactly which interrupt it was, and it
|
|
|
-+ * invokes the appropriate handler.
|
|
|
-+ *
|
|
|
-+ * Implicitly, we also define interrupt priority by
|
|
|
-+ * choosing which to dispatch first.
|
|
|
-+ */
|
|
|
-+static void ar2315_irq_dispatch(void)
|
|
|
-+{
|
|
|
-+ u32 pending = read_c0_status() & read_c0_cause();
|
|
|
-+
|
|
|
-+ if (pending & CAUSEF_IP3)
|
|
|
-+ do_IRQ(AR2315_IRQ_WLAN0);
|
|
|
-+ else if (pending & CAUSEF_IP2)
|
|
|
-+ do_IRQ(AR2315_IRQ_MISC);
|
|
|
-+ else if (pending & CAUSEF_IP7)
|
|
|
-+ do_IRQ(ATH25_IRQ_CPU_CLOCK);
|
|
|
-+ else
|
|
|
-+ spurious_interrupt();
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar2315_arch_init_irq(void)
|
|
|
-+{
|
|
|
-+ struct irq_domain *domain;
|
|
|
-+ unsigned irq;
|
|
|
-+
|
|
|
-+ ath25_irq_dispatch = ar2315_irq_dispatch;
|
|
|
-+
|
|
|
-+ domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT,
|
|
|
-+ &ar2315_misc_irq_domain_ops, NULL);
|
|
|
-+ if (!domain)
|
|
|
-+ panic("Failed to add IRQ domain");
|
|
|
-+
|
|
|
-+ irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB);
|
|
|
-+ setup_irq(irq, &ar2315_ahb_err_interrupt);
|
|
|
-+
|
|
|
-+ irq_set_chained_handler(AR2315_IRQ_MISC, ar2315_misc_irq_handler);
|
|
|
-+ irq_set_handler_data(AR2315_IRQ_MISC, domain);
|
|
|
-+
|
|
|
-+ ar2315_misc_irq_domain = domain;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar2315_init_devices(void)
|
|
|
-+{
|
|
|
-+ /* Find board configuration */
|
|
|
-+ ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE);
|
|
|
-+
|
|
|
-+ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static void ar2315_restart(char *command)
|
|
|
-+{
|
|
|
-+ void (*mips_reset_vec)(void) = (void *)0xbfc00000;
|
|
|
-+
|
|
|
-+ local_irq_disable();
|
|
|
-+
|
|
|
-+ /* try reset the system via reset control */
|
|
|
-+ ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM);
|
|
|
-+
|
|
|
-+ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits
|
|
|
-+ * a workaround. Give it some time to attempt a gpio based hardware
|
|
|
-+ * reset (atheros reference design workaround) */
|
|
|
-+
|
|
|
-+ /* TODO: implement the GPIO reset workaround */
|
|
|
-+
|
|
|
-+ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic
|
|
|
-+ * workaround. Attempt to jump to the mips reset location -
|
|
|
-+ * the boot loader itself might be able to recover the system */
|
|
|
-+ mips_reset_vec();
|
|
|
-+}
|
|
|
-+
|
|
|
-+/*
|
|
|
-+ * This table is indexed by bits 5..4 of the CLOCKCTL1 register
|
|
|
-+ * to determine the predevisor value.
|
|
|
-+ */
|
|
|
-+static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 };
|
|
|
-+static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 };
|
|
|
-+
|
|
|
-+static unsigned __init ar2315_sys_clk(u32 clock_ctl)
|
|
|
-+{
|
|
|
-+ unsigned int pllc_ctrl, cpu_div;
|
|
|
-+ unsigned int pllc_out, refdiv, fdiv, divby2;
|
|
|
-+ unsigned int clk_div;
|
|
|
-+
|
|
|
-+ pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL);
|
|
|
-+ refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV);
|
|
|
-+ refdiv = clockctl1_predivide_table[refdiv];
|
|
|
-+ fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV);
|
|
|
-+ divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1;
|
|
|
-+ pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv;
|
|
|
-+
|
|
|
-+ /* clkm input selected */
|
|
|
-+ switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) {
|
|
|
-+ case 0:
|
|
|
-+ case 1:
|
|
|
-+ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV);
|
|
|
-+ clk_div = pllc_divide_table[clk_div];
|
|
|
-+ break;
|
|
|
-+ case 2:
|
|
|
-+ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV);
|
|
|
-+ clk_div = pllc_divide_table[clk_div];
|
|
|
-+ break;
|
|
|
-+ default:
|
|
|
-+ pllc_out = 40000000;
|
|
|
-+ clk_div = 1;
|
|
|
-+ break;
|
|
|
-+ }
|
|
|
-+
|
|
|
-+ cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV);
|
|
|
-+ cpu_div = cpu_div * 2 ?: 1;
|
|
|
-+
|
|
|
-+ return pllc_out / (clk_div * cpu_div);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline unsigned ar2315_cpu_frequency(void)
|
|
|
-+{
|
|
|
-+ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK));
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline unsigned ar2315_apb_frequency(void)
|
|
|
-+{
|
|
|
-+ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK));
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar2315_plat_time_init(void)
|
|
|
-+{
|
|
|
-+ mips_hpt_frequency = ar2315_cpu_frequency() / 2;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar2315_plat_mem_setup(void)
|
|
|
-+{
|
|
|
-+ void __iomem *sdram_base;
|
|
|
-+ u32 memsize, memcfg;
|
|
|
-+ u32 devid;
|
|
|
-+ u32 config;
|
|
|
-+
|
|
|
-+ /* Detect memory size */
|
|
|
-+ sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE,
|
|
|
-+ AR2315_SDRAMCTL_SIZE);
|
|
|
-+ memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG);
|
|
|
-+ memsize = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH);
|
|
|
-+ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH);
|
|
|
-+ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH);
|
|
|
-+ memsize <<= 3;
|
|
|
-+ add_memory_region(0, memsize, BOOT_MEM_RAM);
|
|
|
-+ iounmap(sdram_base);
|
|
|
-+
|
|
|
-+ ar2315_rst_base = ioremap_nocache(AR2315_RST_BASE, AR2315_RST_SIZE);
|
|
|
-+
|
|
|
-+ /* Detect the hardware based on the device ID */
|
|
|
-+ devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP;
|
|
|
-+ switch (devid) {
|
|
|
-+ case 0x91: /* Need to check */
|
|
|
-+ ath25_soc = ATH25_SOC_AR2318;
|
|
|
-+ break;
|
|
|
-+ case 0x90:
|
|
|
-+ ath25_soc = ATH25_SOC_AR2317;
|
|
|
-+ break;
|
|
|
-+ case 0x87:
|
|
|
-+ ath25_soc = ATH25_SOC_AR2316;
|
|
|
-+ break;
|
|
|
-+ case 0x86:
|
|
|
-+ default:
|
|
|
-+ ath25_soc = ATH25_SOC_AR2315;
|
|
|
-+ break;
|
|
|
-+ }
|
|
|
-+ ath25_board.devid = devid;
|
|
|
-+
|
|
|
-+ /* Clear any lingering AHB errors */
|
|
|
-+ config = read_c0_config();
|
|
|
-+ write_c0_config(config & ~0x3);
|
|
|
-+ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET);
|
|
|
-+ ar2315_rst_reg_read(AR2315_AHB_ERR1);
|
|
|
-+ ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE);
|
|
|
-+
|
|
|
-+ _machine_restart = ar2315_restart;
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ar2315_arch_init(void)
|
|
|
-+{
|
|
|
-+ unsigned irq = irq_create_mapping(ar2315_misc_irq_domain,
|
|
|
-+ AR2315_MISC_IRQ_UART0);
|
|
|
-+
|
|
|
-+ ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency());
|
|
|
-+}
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar2315.h
|
|
|
-@@ -0,0 +1,22 @@
|
|
|
-+#ifndef __AR2315_H
|
|
|
-+#define __AR2315_H
|
|
|
-+
|
|
|
-+#ifdef CONFIG_SOC_AR2315
|
|
|
-+
|
|
|
-+void ar2315_arch_init_irq(void);
|
|
|
-+void ar2315_init_devices(void);
|
|
|
-+void ar2315_plat_time_init(void);
|
|
|
-+void ar2315_plat_mem_setup(void);
|
|
|
-+void ar2315_arch_init(void);
|
|
|
-+
|
|
|
-+#else
|
|
|
-+
|
|
|
-+static inline void ar2315_arch_init_irq(void) {}
|
|
|
-+static inline void ar2315_init_devices(void) {}
|
|
|
-+static inline void ar2315_plat_time_init(void) {}
|
|
|
-+static inline void ar2315_plat_mem_setup(void) {}
|
|
|
-+static inline void ar2315_arch_init(void) {}
|
|
|
-+
|
|
|
-+#endif
|
|
|
-+
|
|
|
-+#endif /* __AR2315_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/ar5312.h
|
|
|
-@@ -0,0 +1,22 @@
|
|
|
-+#ifndef __AR5312_H
|
|
|
-+#define __AR5312_H
|
|
|
-+
|
|
|
-+#ifdef CONFIG_SOC_AR5312
|
|
|
-+
|
|
|
-+void ar5312_arch_init_irq(void);
|
|
|
-+void ar5312_init_devices(void);
|
|
|
-+void ar5312_plat_time_init(void);
|
|
|
-+void ar5312_plat_mem_setup(void);
|
|
|
-+void ar5312_arch_init(void);
|
|
|
-+
|
|
|
-+#else
|
|
|
-+
|
|
|
-+static inline void ar5312_arch_init_irq(void) {}
|
|
|
-+static inline void ar5312_init_devices(void) {}
|
|
|
-+static inline void ar5312_plat_time_init(void) {}
|
|
|
-+static inline void ar5312_plat_mem_setup(void) {}
|
|
|
-+static inline void ar5312_arch_init(void) {}
|
|
|
-+
|
|
|
-+#endif
|
|
|
-+
|
|
|
-+#endif /* __AR5312_H */
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/devices.h
|
|
|
-@@ -0,0 +1,43 @@
|
|
|
-+#ifndef __ATH25_DEVICES_H
|
|
|
-+#define __ATH25_DEVICES_H
|
|
|
-+
|
|
|
-+#include <linux/cpu.h>
|
|
|
-+
|
|
|
-+#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S)
|
|
|
-+
|
|
|
-+#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */
|
|
|
-+
|
|
|
-+enum ath25_soc_type {
|
|
|
-+ /* handled by ar5312.c */
|
|
|
-+ ATH25_SOC_AR2312,
|
|
|
-+ ATH25_SOC_AR2313,
|
|
|
-+ ATH25_SOC_AR5312,
|
|
|
-+
|
|
|
-+ /* handled by ar2315.c */
|
|
|
-+ ATH25_SOC_AR2315,
|
|
|
-+ ATH25_SOC_AR2316,
|
|
|
-+ ATH25_SOC_AR2317,
|
|
|
-+ ATH25_SOC_AR2318,
|
|
|
-+
|
|
|
-+ ATH25_SOC_UNKNOWN
|
|
|
-+};
|
|
|
-+
|
|
|
-+extern enum ath25_soc_type ath25_soc;
|
|
|
-+extern struct ar231x_board_config ath25_board;
|
|
|
-+extern void (*ath25_irq_dispatch)(void);
|
|
|
-+
|
|
|
-+int ath25_find_config(phys_addr_t offset, unsigned long size);
|
|
|
-+void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk);
|
|
|
-+int ath25_add_wmac(int nr, u32 base, int irq);
|
|
|
-+
|
|
|
-+static inline bool is_ar2315(void)
|
|
|
-+{
|
|
|
-+ return (current_cpu_data.cputype == CPU_4KEC);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static inline bool is_ar5312(void)
|
|
|
-+{
|
|
|
-+ return !is_ar2315();
|
|
|
-+}
|
|
|
-+
|
|
|
-+#endif
|
|
|
---- /dev/null
|
|
|
-+++ b/arch/mips/ath25/devices.c
|
|
|
-@@ -0,0 +1,125 @@
|
|
|
-+#include <linux/kernel.h>
|
|
|
-+#include <linux/init.h>
|
|
|
-+#include <linux/serial_8250.h>
|
|
|
-+#include <linux/platform_device.h>
|
|
|
-+#include <asm/bootinfo.h>
|
|
|
-+
|
|
|
-+#include <ath25_platform.h>
|
|
|
-+#include "devices.h"
|
|
|
-+#include "ar5312.h"
|
|
|
-+#include "ar2315.h"
|
|
|
-+
|
|
|
-+struct ar231x_board_config ath25_board;
|
|
|
-+enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN;
|
|
|
-+
|
|
|
-+static struct resource ath25_wmac0_res[] = {
|
|
|
-+ {
|
|
|
-+ .name = "wmac0_membase",
|
|
|
-+ .flags = IORESOURCE_MEM,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "wmac0_irq",
|
|
|
-+ .flags = IORESOURCE_IRQ,
|
|
|
-+ }
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct resource ath25_wmac1_res[] = {
|
|
|
-+ {
|
|
|
-+ .name = "wmac1_membase",
|
|
|
-+ .flags = IORESOURCE_MEM,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .name = "wmac1_irq",
|
|
|
-+ .flags = IORESOURCE_IRQ,
|
|
|
-+ }
|
|
|
-+};
|
|
|
-+
|
|
|
-+static struct platform_device ath25_wmac[] = {
|
|
|
-+ {
|
|
|
-+ .id = 0,
|
|
|
-+ .name = "ar231x-wmac",
|
|
|
-+ .resource = ath25_wmac0_res,
|
|
|
-+ .num_resources = ARRAY_SIZE(ath25_wmac0_res),
|
|
|
-+ .dev.platform_data = &ath25_board,
|
|
|
-+ },
|
|
|
-+ {
|
|
|
-+ .id = 1,
|
|
|
-+ .name = "ar231x-wmac",
|
|
|
-+ .resource = ath25_wmac1_res,
|
|
|
-+ .num_resources = ARRAY_SIZE(ath25_wmac1_res),
|
|
|
-+ .dev.platform_data = &ath25_board,
|
|
|
-+ },
|
|
|
-+};
|
|
|
-+
|
|
|
-+static const char * const soc_type_strings[] = {
|
|
|
-+ [ATH25_SOC_AR5312] = "Atheros AR5312",
|
|
|
-+ [ATH25_SOC_AR2312] = "Atheros AR2312",
|
|
|
-+ [ATH25_SOC_AR2313] = "Atheros AR2313",
|
|
|
-+ [ATH25_SOC_AR2315] = "Atheros AR2315",
|
|
|
-+ [ATH25_SOC_AR2316] = "Atheros AR2316",
|
|
|
-+ [ATH25_SOC_AR2317] = "Atheros AR2317",
|
|
|
-+ [ATH25_SOC_AR2318] = "Atheros AR2318",
|
|
|
-+ [ATH25_SOC_UNKNOWN] = "Atheros (unknown)",
|
|
|
-+};
|
|
|
-+
|
|
|
-+const char *get_system_type(void)
|
|
|
-+{
|
|
|
-+ if ((ath25_soc >= ARRAY_SIZE(soc_type_strings)) ||
|
|
|
-+ !soc_type_strings[ath25_soc])
|
|
|
-+ return soc_type_strings[ATH25_SOC_UNKNOWN];
|
|
|
-+ return soc_type_strings[ath25_soc];
|
|
|
-+}
|
|
|
-+
|
|
|
-+void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk)
|
|
|
-+{
|
|
|
-+ struct uart_port s;
|
|
|
-+
|
|
|
-+ memset(&s, 0, sizeof(s));
|
|
|
-+
|
|
|
-+ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP;
|
|
|
-+ s.iotype = UPIO_MEM32;
|
|
|
-+ s.irq = irq;
|
|
|
-+ s.regshift = 2;
|
|
|
-+ s.mapbase = mapbase;
|
|
|
-+ s.uartclk = uartclk;
|
|
|
-+
|
|
|
-+ early_serial_setup(&s);
|
|
|
-+}
|
|
|
-+
|
|
|
-+int __init ath25_add_wmac(int nr, u32 base, int irq)
|
|
|
-+{
|
|
|
-+ struct resource *res;
|
|
|
-+
|
|
|
-+ ath25_wmac[nr].dev.platform_data = &ath25_board;
|
|
|
-+ res = &ath25_wmac[nr].resource[0];
|
|
|
-+ res->start = base;
|
|
|
-+ res->end = base + 0x10000 - 1;
|
|
|
-+ res++;
|
|
|
-+ res->start = irq;
|
|
|
-+ res->end = irq;
|
|
|
-+ return platform_device_register(&ath25_wmac[nr]);
|
|
|
-+}
|
|
|
-+
|
|
|
-+static int __init ath25_register_devices(void)
|
|
|
-+{
|
|
|
-+ if (is_ar5312())
|
|
|
-+ ar5312_init_devices();
|
|
|
-+ else
|
|
|
-+ ar2315_init_devices();
|
|
|
-+
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+device_initcall(ath25_register_devices);
|
|
|
-+
|
|
|
-+static int __init ath25_arch_init(void)
|
|
|
-+{
|
|
|
-+ if (is_ar5312())
|
|
|
-+ ar5312_arch_init();
|
|
|
-+ else
|
|
|
-+ ar2315_arch_init();
|
|
|
-+
|
|
|
-+ return 0;
|
|
|
-+}
|
|
|
-+
|
|
|
-+arch_initcall(ath25_arch_init);
|
Russell Senior