ipq806x: consolidate 11-ath10k-caldata

After the ath10k_patch_mac lines have been removed, a lot of blocks
can be consolidated.

Signed-off-by: Adrian Schmutzler <[email protected]>

target/linux/ipq806x/base-files/etc/hotplug.d/firmware/11-ath10k-caldata

@@ -12,29 +12,24 @@ case "$FIRMWARE" in
 	askey,rt4230w-rev6)
 		caldata_extract "0:ART" 0x1000 0x2f20
 		;;
-	asrock,g10)
+	asrock,g10 |\
+	edgecore,ecw5410)
 		caldata_extract "0:art" 0x1000 0x2f20
 		;;
-	buffalo,wxr-2533dhp)
+	buffalo,wxr-2533dhp |\
+	nec,wg2600hp |\
+	nec,wg2600hp3 |\
+	tplink,vr2600v)
 		caldata_extract "ART" 0x1000 0x2f20
 		;;
-	edgecore,ecw5410)
-		caldata_extract "0:art" 0x1000 0x2f20
-		;;
 	linksys,ea7500-v1 |\
 	linksys,ea8500)
 		caldata_extract "art" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) 1)
 		;;
-	nec,wg2600hp |\
-	nec,wg2600hp3)
-		caldata_extract "ART" 0x1000 0x2f20
-		;;
 	netgear,d7800 |\
 	netgear,r7500v2 |\
-	netgear,r7800)
-		caldata_extract "art" 0x1000 0x2f20
-		;;
+	netgear,r7800 |\
 	netgear,xr500)
 		caldata_extract "art" 0x1000 0x2f20
 		;;
@@ -42,9 +37,6 @@ case "$FIRMWARE" in
 	tplink,c2600)
 		caldata_extract "radio" 0x1000 0x2f20
 		;;
-	tplink,vr2600v)
-		caldata_extract "ART" 0x1000 0x2f20
-		;;
 	zyxel,nbg6817)
 		caldata_extract "0:art" 0x1000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii 0:appsblenv ethaddr) 1)
@@ -59,7 +51,10 @@ case "$FIRMWARE" in
 	asrock,g10)
 		caldata_extract "0:art" 0x5000 0x2f20
 		;;
-	buffalo,wxr-2533dhp)
+	buffalo,wxr-2533dhp |\
+	nec,wg2600hp |\
+	nec,wg2600hp3 |\
+	tplink,vr2600v)
 		caldata_extract "ART" 0x5000 0x2f20
 		;;
 	linksys,ea7500-v1 |\
@@ -67,15 +62,9 @@ case "$FIRMWARE" in
 		caldata_extract "art" 0x5000 0x2f20
 		ath10k_patch_mac $(macaddr_add $(mtd_get_mac_ascii devinfo hw_mac_addr) 2)
 		;;
-	nec,wg2600hp |\
-	nec,wg2600hp3)
-		caldata_extract "ART" 0x5000 0x2f20
-		;;
 	netgear,d7800 |\
 	netgear,r7500v2 |\
-	netgear,r7800)
-		caldata_extract "art" 0x5000 0x2f20
-		;;
+	netgear,r7800 |\
 	netgear,xr500)
 		caldata_extract "art" 0x5000 0x2f20
 		;;
@@ -83,9 +72,6 @@ case "$FIRMWARE" in
 	tplink,c2600)
 		caldata_extract "radio" 0x5000 0x2f20
 		;;
-	tplink,vr2600v)
-		caldata_extract "ART" 0x5000 0x2f20
-		;;
 	zyxel,nbg6817)
 		caldata_extract "0:art" 0x5000 0x2f20
 		ath10k_patch_mac $(mtd_get_mac_ascii 0:appsblenv ethaddr)