ar71xx: nuke 2.6.28 support

SVN-Revision: 18750

target/linux/ar71xx/config-2.6.28

@@ -1,216 +0,0 @@
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-CONFIG_AG71XX=y
-CONFIG_AG71XX_AR8216_SUPPORT=y
-# CONFIG_AG71XX_DEBUG is not set
-CONFIG_AR71XX_MACH_AP81=y
-CONFIG_AR71XX_MACH_AP83=y
-CONFIG_AR71XX_MACH_AW_NR580=y
-CONFIG_AR71XX_MACH_DIR_825_B1=y
-CONFIG_AR71XX_MACH_GENERIC=y
-CONFIG_AR71XX_MACH_MZK_W04NU=y
-CONFIG_AR71XX_MACH_MZK_W300NH=y
-CONFIG_AR71XX_MACH_PB42=y
-CONFIG_AR71XX_MACH_PB44=y
-CONFIG_AR71XX_MACH_RB_4XX=y
-CONFIG_AR71XX_MACH_TEW_632BRP=y
-CONFIG_AR71XX_MACH_TL_WR1043ND=y
-CONFIG_AR71XX_MACH_TL_WR741ND=y
-CONFIG_AR71XX_MACH_TL_WR941ND=y
-CONFIG_AR71XX_MACH_UBNT=y
-CONFIG_AR71XX_MACH_WNDR3700=y
-CONFIG_AR71XX_MACH_WNR2000=y
-CONFIG_AR71XX_MACH_WP543=y
-CONFIG_AR71XX_MACH_WRT160NL=y
-CONFIG_AR71XX_MACH_WRT400N=y
-CONFIG_AR71XX_WDT=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ATHEROS_AR71XX=y
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CEVT_R4K=y
-CONFIG_CLASSIC_RCU=y
-CONFIG_CMDLINE="rootfstype=squashfs,yaffs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-# CONFIG_CPU_MIPS32_R1 is not set
-CONFIG_CPU_MIPS32_R2=y
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR2=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R5500 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_PCF857X=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HARDWARE_WATCHPOINTS=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HW_HAS_PCI=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_GPIO=y
-CONFIG_ICPLUS_PHY=y
-# CONFIG_IDE is not set
-CONFIG_IMAGE_CMDLINE_HACK=y
-CONFIG_INITRAMFS_ROOT_GID=0
-CONFIG_INITRAMFS_ROOT_UID=0
-CONFIG_INITRAMFS_SOURCE="../../root"
-CONFIG_IRQ_CPU=y
-# CONFIG_ISDN is not set
-# CONFIG_LEDS_GPIO is not set
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_M25PXX_USE_FAST_READ is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_EMMA is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_TX39XX is not set
-# CONFIG_MACH_TX49XX is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MICREL_PHY=y
-# CONFIG_MIKROTIK_RB532 is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-CONFIG_MIPS_MACHINE=y
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SIM is not set
-CONFIG_MTD_AR91XX_FLASH=y
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_JEDECPROBE=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_MYLOADER_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_RB4XX=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-2
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_WRT160NL_PARTS=y
-CONFIG_MYLOADER=y
-CONFIG_NET_DSA=y
-CONFIG_NET_DSA_MV88E6060=y
-# CONFIG_NET_DSA_MV88E6123_61_65 is not set
-# CONFIG_NET_DSA_MV88E6131 is not set
-# CONFIG_NET_DSA_MV88E6XXX is not set
-# CONFIG_NET_DSA_MV88E6XXX_NEED_PPU is not set
-# CONFIG_NET_DSA_TAG_DSA is not set
-# CONFIG_NET_DSA_TAG_EDSA is not set
-CONFIG_NET_DSA_TAG_TRAILER=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_NXP_STB220 is not set
-# CONFIG_NXP_STB225 is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PCI_DISABLE_COMMON_QUIRKS=y
-CONFIG_PCI_DOMAINS=y
-CONFIG_PHYLIB=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
-# CONFIG_R6040 is not set
-CONFIG_RTL8306_PHY=y
-CONFIG_RTL8366_SMI=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP28 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SLAB is not set
-CONFIG_SLUB=y
-CONFIG_SPI=y
-CONFIG_SPI_AP83=y
-CONFIG_SPI_AR71XX=y
-CONFIG_SPI_BITBANG=y
-CONFIG_SPI_GPIO=y
-CONFIG_SPI_MASTER=y
-CONFIG_SPI_PB44=y
-# CONFIG_SPI_SPIDEV is not set
-# CONFIG_SPI_VSC7385 is not set
-CONFIG_SWCONFIG=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_HAS_CPU_MIPS32_R2=y
-CONFIG_SYS_HAS_EARLY_PRINTK=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-# CONFIG_TC35815 is not set
-CONFIG_TRAD_SIGNALS=y
-CONFIG_USB_SUPPORT=y
-# CONFIG_VGASTATE is not set
-# CONFIG_VIA_RHINE is not set
-CONFIG_YAFFS_9BYTE_TAGS=y
-CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0

target/linux/ar71xx/patches-2.6.28/001-ar71xx_core.patch

@@ -1,50 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -593,6 +593,13 @@ core-$(CONFIG_TOSHIBA_RBTX4927)	+= arch/
- core-$(CONFIG_TOSHIBA_RBTX4938) += arch/mips/txx9/rbtx4938/
- core-$(CONFIG_TOSHIBA_RBTX4939) += arch/mips/txx9/rbtx4939/
- 
-+#
-+# Atheros AR71xx
-+#
-+core-$(CONFIG_ATHEROS_AR71XX)	+= arch/mips/ar71xx/
-+cflags-$(CONFIG_ATHEROS_AR71XX)	+= -I$(srctree)/arch/mips/include/asm/mach-ar71xx
-+load-$(CONFIG_ATHEROS_AR71XX)	+= 0xffffffff80060000
-+
- # temporary until string.h is fixed
- cflags-y += -ffreestanding
- 
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -22,6 +22,23 @@ choice
- config MACH_ALCHEMY
- 	bool "Alchemy processor based machines"
- 
-+config ATHEROS_AR71XX
-+	bool "Atheros AR71xx based boards"
-+	select CEVT_R4K
-+	select CSRC_R4K
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select ARCH_REQUIRE_GPIOLIB
-+	select SYS_HAS_CPU_MIPS32_R1
-+	select SYS_HAS_CPU_MIPS32_R2
-+	select SYS_SUPPORTS_32BIT_KERNEL
-+	select SYS_SUPPORTS_BIG_ENDIAN
-+	select SYS_HAS_EARLY_PRINTK
-+	select MIPS_MACHINE
-+	help
-+	  Support for Atheros AR71xx based boards.
-+
- config BASLER_EXCITE
- 	bool "Basler eXcite smart camera"
- 	select CEVT_R4K
-@@ -598,6 +615,7 @@ config WR_PPMC
- endchoice
- 
- source "arch/mips/alchemy/Kconfig"
-+source "arch/mips/ar71xx/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/emma/Kconfig"
- source "arch/mips/jazz/Kconfig"

target/linux/ar71xx/patches-2.6.28/002-ar71xx_pci.patch

@@ -1,10 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -16,6 +16,7 @@ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o
- obj-$(CONFIG_NEC_MARKEINS)	+= ops-emma2rh.o pci-emma2rh.o fixup-emma2rh.o
- obj-$(CONFIG_PCI_TX4927)	+= ops-tx4927.o
- obj-$(CONFIG_BCM47XX)		+= pci-bcm47xx.o
-+obj-$(CONFIG_ATHEROS_AR71XX)	+= pci-ar71xx.o pci-ar724x.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.

target/linux/ar71xx/patches-2.6.28/003-ar71xx_usb_host.patch

@@ -1,58 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -81,6 +81,13 @@ config USB_EHCI_BIG_ENDIAN_DESC
- 	depends on USB_EHCI_HCD && (440EPX || ARCH_IXP4XX)
- 	default y
- 
-+config USB_EHCI_AR71XX
-+	bool "USB EHCI support for AR71xx"
-+	depends on USB_EHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in EHCI controller
-+
- config USB_EHCI_FSL
- 	bool "Support for Freescale on-chip EHCI USB controller"
- 	depends on USB_EHCI_HCD && FSL_SOC
-@@ -140,6 +147,13 @@ config USB_OHCI_HCD
- 	  To compile this driver as a module, choose M here: the
- 	  module will be called ohci-hcd.
- 
-+config USB_OHCI_AR71XX
-+	bool "USB OHCI support for Atheros AR71xx"
-+	depends on USB_OHCI_HCD && ATHEROS_AR71XX
-+	default y
-+	help
-+	  Support for Atheros AR71xx built-in OHCI controller
-+
- config USB_OHCI_HCD_PPC_SOC
- 	bool "OHCI support for on-chip PPC USB controller"
- 	depends on USB_OHCI_HCD && (STB03xxx || PPC_MPC52xx)
---- a/drivers/usb/host/ehci-hcd.c
-+++ b/drivers/usb/host/ehci-hcd.c
-@@ -1036,6 +1036,11 @@ MODULE_LICENSE ("GPL");
- #define	PLATFORM_DRIVER		ixp4xx_ehci_driver
- #endif
- 
-+#ifdef CONFIG_USB_EHCI_AR71XX
-+#include "ehci-ar71xx.c"
-+#define PLATFORM_DRIVER		ehci_ar71xx_driver
-+#endif
-+
- #if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
-     !defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
- #error "missing bus glue for ehci-hcd"
---- a/drivers/usb/host/ohci-hcd.c
-+++ b/drivers/usb/host/ohci-hcd.c
-@@ -1080,6 +1080,11 @@ MODULE_LICENSE ("GPL");
- #define TMIO_OHCI_DRIVER	ohci_hcd_tmio_driver
- #endif
- 
-+#ifdef CONFIG_USB_OHCI_AR71XX
-+#include "ohci-ar71xx.c"
-+#define PLATFORM_DRIVER		ohci_hcd_ar71xx_driver
-+#endif
-+
- #if	!defined(PCI_DRIVER) &&		\
- 	!defined(PLATFORM_DRIVER) &&	\
- 	!defined(OF_PLATFORM_DRIVER) &&	\

target/linux/ar71xx/patches-2.6.28/004-ar71xx_spi_controller.patch

@@ -1,26 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,13 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AR71XX
-+	tristate "Atheros AR71xx SPI Controller"
-+	depends on SPI_MASTER && ATHEROS_AR71XX
-+	select SPI_BITBANG
-+	help
-+	  This is the SPI contoller driver for Atheros AR71xx.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
- obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o

target/linux/ar71xx/patches-2.6.28/005-ar71xx_mac_driver.patch

@@ -1,21 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -2039,6 +2039,8 @@ config ACENIC_OMIT_TIGON_I
- 
- 	  The safe and default value for this is N.
- 
-+source drivers/net/ag71xx/Kconfig
-+
- config DL2K
- 	tristate "DL2000/TC902x-based Gigabit Ethernet support"
- 	depends on PCI
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -93,6 +93,7 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
- obj-$(CONFIG_MII) += mii.o
- obj-$(CONFIG_PHYLIB) += phy/
- 
-+obj-$(CONFIG_AG71XX) += ag71xx/
- obj-$(CONFIG_SUNDANCE) += sundance.o
- obj-$(CONFIG_HAMACHI) += hamachi.o
- obj-$(CONFIG_NET) += Space.o loopback.o

target/linux/ar71xx/patches-2.6.28/006-ar71xx_wdt_driver.patch

@@ -1,26 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -747,6 +747,13 @@ config TXX9_WDT
- 	help
- 	  Hardware driver for the built-in watchdog timer on TXx9 MIPS SoCs.
- 
-+config AR71XX_WDT
-+	tristate "Atheros AR71xx Watchdog Timer"
-+	depends on ATHEROS_AR71XX
-+	help
-+	  Hardware driver for the built-in watchdog timer on the Atheros
-+	  AR71xx SoCs.
-+
- # PARISC Architecture
- 
- # POWERPC Architecture
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -106,6 +106,7 @@ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
- obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
- obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
- obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
-+obj-$(CONFIG_AR71XX_WDT) += ar71xx_wdt.o
- 
- # PARISC Architecture
- 

target/linux/ar71xx/patches-2.6.28/007-ar91xx_flash_driver.patch

@@ -1,26 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -257,6 +257,13 @@ config MTD_ALCHEMY
- 	help
- 	  Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards
- 
-+config MTD_AR91XX_FLASH
-+	tristate "Atheros AR91xx parallel flash support"
-+	depends on ATHEROS_AR71XX
-+	select MTD_COMPLEX_MAPPINGS
-+	help
-+	  Parallel flash driver for the Atheros AR91xx based boards.
-+
- config MTD_DILNETPC
- 	tristate "CFI Flash device mapped on DIL/Net PC"
- 	depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_MTD_DBOX2)		+= dbox2-flash.
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)		+= pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_AR91XX_FLASH)	+= ar91xx_flash.o
- obj-$(CONFIG_MTD_AUTCPU12)	+= autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)	+= edb7312.o
- obj-$(CONFIG_MTD_IMPA7)		+= impa7.o

target/linux/ar71xx/patches-2.6.28/100-mtd_m25p80_add_pm25lv_flash_support.patch

@@ -1,13 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
- 	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
- 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
- 
-+	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
-+	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
-+	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },
-+
- 	/* Spansion -- single (large) sector size only, at least
- 	 * for the chips listed here (without boot sectors).
- 	 */

target/linux/ar71xx/patches-2.6.28/101-ksz8041_phy_driver.patch

@@ -1,24 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -85,6 +85,11 @@ config RTL8306_PHY
- 	tristate "Driver for Realtek RTL8306S switches"
- 	select SWCONFIG
- 
-+config MICREL_PHY
-+	tristate "Drivers for Micrel/Kendin PHYs"
-+	---help---
-+	  Currently has a driver for the KSZ8041
-+
- config FIXED_PHY
- 	bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs"
- 	depends on PHYLIB=y
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
- obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
- obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
-+obj-$(CONFIG_MICREL_PHY)	+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o
- obj-$(CONFIG_MDIO_OF_GPIO)	+= mdio-ofgpio.o

target/linux/ar71xx/patches-2.6.28/102-mtd_m25p80_add_myloader_parser.patch

@@ -1,22 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -711,12 +711,17 @@ static int __devinit m25p_probe(struct s
- 		struct mtd_partition	*parts = NULL;
- 		int			nr_parts = 0;
- 
-+		static const char *part_probes[] = {
- #ifdef CONFIG_MTD_CMDLINE_PARTS
--		static const char *part_probes[] = { "cmdlinepart", NULL, };
-+						"cmdlinepart",
-+#endif
-+#ifdef CONFIG_MTD_MYLOADER_PARTS
-+						"MyLoader",
-+#endif
-+					       	NULL, };
- 
- 		nr_parts = parse_mtd_partitions(&flash->mtd,
- 				part_probes, &parts, 0);
--#endif
- 
- 		if (nr_parts <= 0 && data && data->parts) {
- 			parts = data->parts;

target/linux/ar71xx/patches-2.6.28/103-mtd_m25p80_add_en25pxx_support.patch

@@ -1,13 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -503,6 +503,10 @@ static struct flash_info __devinitdata m
- 	{ "at26df161a", 0x1f4601, 0, 64 * 1024, 32, SECT_4K, },
- 	{ "at26df321",  0x1f4701, 0, 64 * 1024, 64, SECT_4K, },
- 
-+	/* EON -- en25pxx */
-+	{ "en25p32", 0x1c2016, 0, 64 * 1024,  64, },
-+	{ "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
-+
- 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
- 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.28/104-mtd_m25p80_add_redboot_parser.patch

@@ -1,12 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -722,6 +722,9 @@ static int __devinit m25p_probe(struct s
- #ifdef CONFIG_MTD_MYLOADER_PARTS
- 						"MyLoader",
- #endif
-+#ifdef CONFIG_MTD_REDBOOT_PARTS
-+						"RedBoot",
-+#endif
- 					       	NULL, };
- 
- 		nr_parts = parse_mtd_partitions(&flash->mtd,

target/linux/ar71xx/patches-2.6.28/105-mtd_m25p80_add_mx25lxxx_support.patch

@@ -1,14 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -507,6 +507,11 @@ static struct flash_info __devinitdata m
- 	{ "en25p32", 0x1c2016, 0, 64 * 1024,  64, },
- 	{ "en25p64", 0x1c2017, 0, 64 * 1024, 128, },
- 
-+	/* Macronix -- mx25lxxx */
-+	{ "mx25l32",  0xc22016, 0, 64 * 1024,  64, },
-+	{ "mx25l64",  0xc22017, 0, 64 * 1024, 128, },
-+	{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
-+
- 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
- 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.28/106-mtd_m25p80_add_xxxs33b_support.patch

@@ -1,14 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -512,6 +512,11 @@ static struct flash_info __devinitdata m
- 	{ "mx25l64",  0xc22017, 0, 64 * 1024, 128, },
- 	{ "mx25l128", 0xc22018, 0, 64 * 1024, 256, },
- 
-+	/* Numonyx -- xxxs33b */
-+	{ "160s33b",  0x898911, 0, 64 * 1024,  64, },
-+	{ "320s33b",  0x898912, 0, 64 * 1024, 128, },
-+	{ "640s33b",  0x898913, 0, 64 * 1024, 256, },
-+
- 	/* PMC -- pm25x "blocks" are 32K, sectors are 4K */
- 	{ "pm25lv512",         0, 32 * 1024, 2, SECT_4K },
- 	{ "pm25lv010",         0, 32 * 1024, 4, SECT_4K },

target/linux/ar71xx/patches-2.6.28/107-mtd-SST39VF6401B-support.patch

@@ -1,29 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -159,6 +159,7 @@
- #define SST39LF800	0x2781
- #define SST39LF160	0x2782
- #define SST39VF1601	0x234b
-+#define SST39VF6401B	0x236d
- #define SST39LF512	0x00D4
- #define SST39LF010	0x00D5
- #define SST39LF020	0x00D6
-@@ -1502,6 +1503,18 @@ static const struct amd_flash_info jedec
- 			ERASEINFO(0x10000,64),
- 		}
- 	}, {
-+		.mfr_id         = MANUFACTURER_SST,
-+		.dev_id         = SST39VF6401B,
-+		.name           = "SST 39VF6401B",
-+		.devtypes       = CFI_DEVICETYPE_X16,
-+		.uaddr          = MTD_UADDR_0xAAAA_0x5555,
-+		.dev_size       = SIZE_8MiB,
-+		.cmd_set        = P_ID_AMD_STD,
-+		.nr_regions     = 1,
-+		.regions        = {
-+			ERASEINFO(0x10000,128)
-+		}
-+	}, {
- 		.mfr_id		= MANUFACTURER_ST,
- 		.dev_id		= M29F800AB,
- 		.name		= "ST M29F800AB",

target/linux/ar71xx/patches-2.6.28/108-mtd_fix_cfi_cmdset_0002_erase_status_check.patch

@@ -1,20 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -1558,7 +1558,7 @@ static int __xipram do_erase_chip(struct
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr))
-+		if (chip_good(map, adr, map_word_ff(map)))
- 			break;
- 
- 		if (time_after(jiffies, timeo)) {
-@@ -1646,7 +1646,7 @@ static int __xipram do_erase_oneblock(st
- 			chip->erase_suspended = 0;
- 		}
- 
--		if (chip_ready(map, adr)) {
-+		if (chip_good(map, adr, map_word_ff(map))) {
- 			xip_enable(map, chip, adr);
- 			break;
- 		}

target/linux/ar71xx/patches-2.6.28/109-mtd-wrt160nl-trx-parser.patch

@@ -1,37 +0,0 @@
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -735,6 +735,9 @@ static int __devinit m25p_probe(struct s
- #ifdef CONFIG_MTD_REDBOOT_PARTS
- 						"RedBoot",
- #endif
-+#ifdef CONFIG_MTD_WRT160NL_PARTS
-+						"wrt160nl",
-+#endif
- 					       	NULL, };
- 
- 		nr_parts = parse_mtd_partitions(&flash->mtd,
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -172,6 +172,12 @@ config MTD_AR7_PARTS
- 	---help---
- 	  TI AR7 partitioning support
- 
-+config MTD_WRT160NL_PARTS
-+	tristate "Linksys WRT160NL partitioning support"
-+	depends on MTD_PARTITIONS && AR71XX_MACH_WRT160NL
-+	---help---
-+	   Linksys WRT160NL partitioning support
-+
- config MTD_MYLOADER_PARTS
- 	tristate "MyLoader partition parsing"
- 	depends on MTD_PARTITIONS && (ADM5120 || ATHEROS || ATHEROS_AR71XX)
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_REDBOOT_PARTS) += redbo
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)	+= afs.o
- obj-$(CONFIG_MTD_AR7_PARTS)	+= ar7part.o
-+obj-$(CONFIG_MTD_WRT160NL_PARTS) += wrt160nl_part.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
- obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- 

target/linux/ar71xx/patches-2.6.28/110-usb-ehci-add-war-for-synopsys-hc-bug.patch

@@ -1,22 +0,0 @@
---- a/drivers/usb/host/ehci-q.c
-+++ b/drivers/usb/host/ehci-q.c
-@@ -1082,6 +1082,9 @@ static void end_unlink_async (struct ehc
- 		ehci->reclaim = NULL;
- 		start_unlink_async (ehci, next);
- 	}
-+
-+	if (ehci->has_synopsys_hc_bug)
-+		writel((u32)ehci->async->qh_dma, &ehci->regs->async_next);
- }
- 
- /* makes sure the async qh will become idle */
---- a/drivers/usb/host/ehci.h
-+++ b/drivers/usb/host/ehci.h
-@@ -124,6 +124,7 @@ struct ehci_hcd {			/* one per controlle
- 	unsigned		has_fsl_port_bug:1; /* FreeScale */
- 	unsigned		big_endian_mmio:1;
- 	unsigned		big_endian_desc:1;
-+	unsigned		has_synopsys_hc_bug:1; /* Synopsys HC */
- 
- 	u8			sbrn;		/* packed release number */
- 

target/linux/ar71xx/patches-2.6.28/140-redboot_partition_scan.patch

@@ -1,54 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -60,31 +60,32 @@ static int parse_redboot_partitions(stru
- 	static char nullstring[] = "unallocated";
- #endif
- 
-+	buf = vmalloc(master->erasesize);
-+	if (!buf)
-+		return -ENOMEM;
-+
-+ restart:
- 	if ( directory < 0 ) {
- 		offset = master->size + directory * master->erasesize;
--		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			if (!offset) {
- 			nogood:
- 				printk(KERN_NOTICE "Failed to find a non-bad block to check for RedBoot partition table\n");
-+				vfree(buf);
- 				return -EIO;
- 			}
- 			offset -= master->erasesize;
- 		}
- 	} else {
- 		offset = directory * master->erasesize;
--		while (master->block_isbad && 
-+		while (master->block_isbad &&
- 		       master->block_isbad(master, offset)) {
- 			offset += master->erasesize;
- 			if (offset == master->size)
- 				goto nogood;
- 		}
- 	}
--	buf = vmalloc(master->erasesize);
--
--	if (!buf)
--		return -ENOMEM;
--
- 	printk(KERN_NOTICE "Searching for RedBoot partition table in %s at offset 0x%lx\n",
- 	       master->name, offset);
- 
-@@ -156,6 +157,11 @@ static int parse_redboot_partitions(stru
- 	}
- 	if (i == numslots) {
- 		/* Didn't find it */
-+		if (offset + master->erasesize < master->size) {
-+			/* not at the end of the flash yet, maybe next block :) */
-+			directory++;
-+			goto restart;
-+		}
- 		printk(KERN_NOTICE "No RedBoot partition table detected in %s\n",
- 		       master->name);
- 		ret = 0;

target/linux/ar71xx/patches-2.6.28/200-rb4xx_nand_driver.patch

@@ -1,21 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -420,4 +420,8 @@ config MTD_NAND_SH_FLCTL
- 	  Several Renesas SuperH CPU has FLCTL. This option enables support
- 	  for NAND Flash using FLCTL. This driver support SH7723.
- 
-+config MTD_NAND_RB4XX
-+	tristate "NAND flash driver for RouterBoard 4xx series"
-+	depends on MTD_NAND && ATHEROS_AR71XX
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -29,6 +29,7 @@ obj-$(CONFIG_MTD_NAND_BASLER_EXCITE)	+= 
- obj-$(CONFIG_MTD_NAND_PXA3xx)		+= pxa3xx_nand.o
- obj-$(CONFIG_MTD_NAND_TMIO)		+= tmio_nand.o
- obj-$(CONFIG_MTD_NAND_PLATFORM)		+= plat_nand.o
-+obj-$(CONFIG_MTD_NAND_RB4XX)		+= rb4xx_nand.o
- obj-$(CONFIG_MTD_ALAUDA)		+= alauda.o
- obj-$(CONFIG_MTD_NAND_PASEMI)		+= pasemi_nand.o
- obj-$(CONFIG_MTD_NAND_ORION)		+= orion_nand.o

target/linux/ar71xx/patches-2.6.28/201-ap83_spi_controller.patch

@@ -1,27 +0,0 @@
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -11,6 +11,7 @@ endif
- obj-$(CONFIG_SPI_MASTER)		+= spi.o
- 
- # SPI master controller drivers (bus)
-+obj-$(CONFIG_SPI_AP83)			+= ap83_spi.o
- obj-$(CONFIG_SPI_AR71XX)		+= ar71xx_spi.o
- obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
- obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -53,6 +53,14 @@ if SPI_MASTER
- 
- comment "SPI Master Controller Drivers"
- 
-+config SPI_AP83
-+	tristate "Atheros AP83 specific SPI Controller"
-+	depends on SPI_MASTER && AR71XX_MACH_AP83
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros AP83
-+	  reference board.
-+
- config SPI_AR71XX
- 	tristate "Atheros AR71xx SPI Controller"
- 	depends on SPI_MASTER && ATHEROS_AR71XX

target/linux/ar71xx/patches-2.6.28/202-spi_vsc7385_driver.patch

@@ -1,24 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -283,6 +283,11 @@ config SPI_TLE62X0
- 	  sysfs interface, with each line presented as a kind of GPIO
- 	  exposing both switch control and diagnostic feedback.
- 
-+config SPI_VSC7385
-+	tristate "Vitesse VSC7385 ethernet switch driver"
-+	help
-+	  SPI driver for the Vitesse VSC7385 ethernet switch.
-+
- #
- # Add new SPI protocol masters in alphabetical order above this line
- #
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -38,6 +38,7 @@ obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.
- # SPI protocol drivers (device/link on bus)
- obj-$(CONFIG_SPI_AT25)		+= at25.o
- obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-+obj-$(CONFIG_SPI_VSC7385)	+= spi_vsc7385.o
- obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
- # 	... add above this line ...
- 

target/linux/ar71xx/patches-2.6.28/203-pb44_spi_controller.patch

@@ -1,27 +0,0 @@
---- a/drivers/spi/Kconfig
-+++ b/drivers/spi/Kconfig
-@@ -68,6 +68,14 @@ config SPI_AR71XX
- 	help
- 	  This is the SPI contoller driver for Atheros AR71xx.
- 
-+config SPI_PB44
-+	tristate "Atheros PB44 board specific SPI controller"
-+	depends on SPI_MASTER && AR71XX_MACH_PB44
-+	select SPI_BITBANG
-+	help
-+	  This is a specific SPI controller driver for the Atheros PB44
-+	  reference board.
-+
- config SPI_ATMEL
- 	tristate "Atmel SPI Controller"
- 	depends on (ARCH_AT91 || AVR32)
---- a/drivers/spi/Makefile
-+++ b/drivers/spi/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
- obj-$(CONFIG_SPI_GPIO_OLD)		+= spi_gpio_old.o
- obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
- obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-+obj-$(CONFIG_SPI_PB44)			+= pb44_spi.o
- obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
- obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
- obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o

target/linux/ar71xx/patches-2.6.28/204-rtl8366-smi-driver.patch

@@ -1,21 +0,0 @@
---- a/drivers/net/phy/Kconfig
-+++ b/drivers/net/phy/Kconfig
-@@ -114,4 +114,8 @@ config MDIO_OF_GPIO
- 	---help---
- 	  Supports GPIO lib-based MDIO busses.
- 
-+config RTL8366_SMI
-+	tristate "Support for RTL8366 switch via SMI interface"
-+	depends on GENERIC_GPIO
-+
- endif # PHYLIB
---- a/drivers/net/phy/Makefile
-+++ b/drivers/net/phy/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_ADM6996_PHY)	+= adm6996.o
- obj-$(CONFIG_IP175C_PHY)	+= ip175c.o
- obj-$(CONFIG_RTL8306_PHY)	+= rtl8306.o
- obj-$(CONFIG_REALTEK_PHY)	+= realtek.o
-+obj-$(CONFIG_RTL8366_SMI)	+= rtl8366_smi.o
- obj-$(CONFIG_MICREL_PHY)	+= micrel.o
- obj-$(CONFIG_FIXED_PHY)		+= fixed.o
- obj-$(CONFIG_MDIO_BITBANG)	+= mdio-bitbang.o

target/linux/ar71xx/patches-2.6.28/300-mips_fw_myloader.patch

@@ -1,22 +0,0 @@
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -167,6 +167,7 @@ endif
- #
- libs-$(CONFIG_ARC)		+= arch/mips/fw/arc/
- libs-$(CONFIG_CFE)		+= arch/mips/fw/cfe/
-+libs-$(CONFIG_MYLOADER)		+= arch/mips/fw/myloader/
- libs-$(CONFIG_SNIPROM)		+= arch/mips/fw/sni/
- libs-y				+= arch/mips/fw/lib/
- libs-$(CONFIG_SIBYTE_CFE)	+= arch/mips/sibyte/cfe/
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -789,6 +789,9 @@ config MIPS_NILE4
- config MIPS_DISABLE_OBSOLETE_IDE
- 	bool
- 
-+config MYLOADER
-+	bool
-+
- config SYNC_R4K
- 	bool
- 

target/linux/ar71xx/patches-2.6.28/901-get_c0_compare_irq_function.patch

@@ -1,29 +0,0 @@
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -47,6 +47,7 @@
- #include <asm/mmu_context.h>
- #include <asm/types.h>
- #include <asm/stacktrace.h>
-+#include <asm/time.h>
- 
- extern void check_wait(void);
- extern asmlinkage void r4k_wait(void);
-@@ -1514,6 +1515,8 @@ void __cpuinit per_cpu_trap_init(void)
- 	 */
- 	if (cpu_has_mips_r2) {
- 		cp0_compare_irq = (read_c0_intctl() >> 29) & 7;
-+		if (get_c0_compare_irq)
-+			cp0_compare_irq = get_c0_compare_irq();
- 		cp0_perfcount_irq = (read_c0_intctl() >> 26) & 7;
- 		if (cp0_perfcount_irq == cp0_compare_irq)
- 			cp0_perfcount_irq = -1;
---- a/arch/mips/include/asm/time.h
-+++ b/arch/mips/include/asm/time.h
-@@ -53,6 +53,7 @@ extern int (*perf_irq)(void);
- #ifdef CONFIG_CEVT_R4K
- extern int mips_clockevent_init(void);
- extern unsigned int __weak get_c0_compare_int(void);
-+extern unsigned int __weak get_c0_compare_irq(void);
- #else
- static inline int mips_clockevent_init(void)
- {

target/linux/ar71xx/patches-2.6.28/902-mips_clocksource_init_war.patch

@@ -1,56 +0,0 @@
---- a/arch/mips/kernel/cevt-r4k.c
-+++ b/arch/mips/kernel/cevt-r4k.c
-@@ -15,6 +15,22 @@
- #include <asm/cevt-r4k.h>
- 
- /*
-+ * Compare interrupt can be routed and latched outside the core,
-+ * so a single execution hazard barrier may not be enough to give
-+ * it time to clear as seen in the Cause register.  4 time the
-+ * pipeline depth seems reasonably conservative, and empirically
-+ * works better in configurations with high CPU/bus clock ratios.
-+ */
-+
-+#define compare_change_hazard() \
-+	do { \
-+		irq_disable_hazard(); \
-+		irq_disable_hazard(); \
-+		irq_disable_hazard(); \
-+		irq_disable_hazard(); \
-+	} while (0)
-+
-+/*
-  * The SMTC Kernel for the 34K, 1004K, et. al. replaces several
-  * of these routines with SMTC-specific variants.
-  */
-@@ -30,6 +46,7 @@ static int mips_next_event(unsigned long
- 	cnt = read_c0_count();
- 	cnt += delta;
- 	write_c0_compare(cnt);
-+	compare_change_hazard();
- 	res = ((int)(read_c0_count() - cnt) > 0) ? -ETIME : 0;
- 	return res;
- }
-@@ -99,22 +116,6 @@ static int c0_compare_int_pending(void)
- 	return (read_c0_cause() >> cp0_compare_irq) & 0x100;
- }
- 
--/*
-- * Compare interrupt can be routed and latched outside the core,
-- * so a single execution hazard barrier may not be enough to give
-- * it time to clear as seen in the Cause register.  4 time the
-- * pipeline depth seems reasonably conservative, and empirically
-- * works better in configurations with high CPU/bus clock ratios.
-- */
--
--#define compare_change_hazard() \
--	do { \
--		irq_disable_hazard(); \
--		irq_disable_hazard(); \
--		irq_disable_hazard(); \
--		irq_disable_hazard(); \
--	} while (0)
--
- int c0_compare_int_usable(void)
- {
- 	unsigned int delta;