build: move seama commands to image-commands.mk

Move it to image-commands.mk to get rid of duplicate recipes.

Signed-off-by: Mathias Kresin <[email protected]>

include/image-commands.mk

@@ -49,6 +49,18 @@ define Build/eva-image
 	mv [email protected] $@
 endef
 
+define Build/seama
+	$(STAGING_DIR_HOST)/bin/seama -i $@ \
+		-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
+	mv [email protected] $@
+endef
+
+define Build/seama-seal
+	$(STAGING_DIR_HOST)/bin/seama -i $@ -s [email protected] \
+		-m "signature=$(SEAMA_SIGNATURE)"
+	mv [email protected] $@
+endef
+
 define Build/zyxel-ras-image
 	let \
 		newsize="$(subst k,* 1024,$(RAS_ROOTFS_SIZE))"; \

target/linux/ar71xx/image/generic.mk

@@ -67,17 +67,6 @@ define Build/relocate-kernel
 	rm -rf [email protected]
 endef
 
-define Build/seama
-	$(STAGING_DIR_HOST)/bin/seama -i $@ \
-		-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
-	mv [email protected] $@
-endef
-
-define Build/seama-seal
-	$(STAGING_DIR_HOST)/bin/seama -i $@ -s [email protected] \
-		-m "signature=$(SEAMA_SIGNATURE)"
-endef
-
 define Build/teltonika-fw-fake-checksum
 	# Teltonika U-Boot web based firmware upgrade/recovery routine compares
 	# 16 bytes from md5sum1[16] field in TP-Link v1 header (offset: 76 bytes

target/linux/ramips/image/Makefile

@@ -101,18 +101,6 @@ define Build/poray-header
 	mv [email protected] $@
 endef
 
-define Build/seama
-	$(STAGING_DIR_HOST)/bin/seama -i $@ \
-		-m "dev=/dev/mtdblock/$(SEAMA_MTDBLOCK)" -m "type=firmware"
-	mv [email protected] $@
-endef
-
-define Build/seama-seal
-	$(STAGING_DIR_HOST)/bin/seama -i $@ -s [email protected] \
-		-m "signature=$(SEAMA_SIGNATURE)"
-	mv [email protected] $@
-endef
-
 define Build/wrg-header
 	mkwrgimg -i $@ -d "/dev/mtdblock/2" -s $(1) -o [email protected]
 	mv [email protected] $@