mediatek: filogic: migrate SmartRG Bonanza to upstream PHY LED control

This commit switches the control of the leds connected to the Maxlinear
GPY211C PHY to an upstream solution. There should be no functional changes.

Signed-off-by: Aleksander Jan Bajkowski <[email protected]>

target/linux/mediatek/dts/mt7986a-smartrg-bonanza-peak.dtsi

@@ -220,8 +220,33 @@
 		compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
 		reg = <5>;
 
-		mxl,led-drive-vdd;
-		mxl,led-config = <0x30 0x40 0x80 0x0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				active-high;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_LAN;
+			};
+
+			led-1 {
+				reg = <1>;
+				active-high;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <0>;
+			};
+
+			led-2 {
+				reg = <2>;
+				active-high;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_LAN;
+				function-enumerator = <1>;
+			};
+		};
 	};
 
 	phy6: ethernet-phy@6 {
@@ -229,8 +254,33 @@
 		compatible = "maxlinear,gpy211", "ethernet-phy-ieee802.3-c45";
 		reg = <6>;
 
-		mxl,led-drive-vdd;
-		mxl,led-config = <0x30 0x40 0x80 0x0>;
+		leds {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			led-0 {
+				reg = <0>;
+				active-high;
+				color = <LED_COLOR_ID_AMBER>;
+				function = LED_FUNCTION_WAN;
+			};
+
+			led-1 {
+				reg = <1>;
+				active-high;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <0>;
+			};
+
+			led-2 {
+				reg = <2>;
+				active-high;
+				color = <LED_COLOR_ID_GREEN>;
+				function = LED_FUNCTION_WAN;
+				function-enumerator = <1>;
+			};
+		};
 	};
 };
 

target/linux/mediatek/filogic/base-files/etc/board.d/01_leds

@@ -109,6 +109,28 @@ routerich,ax3000-ubootmod)
 	ucidef_set_led_netdev "wan" "wan" "blue:wan" "wan" "link tx rx"
 	ucidef_set_led_netdev "wan-off" "wan-off" "red:wan" "wan" "link"
 	;;
+smartrg,sdg-8612)
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:amber:lan" "lan4" "link_10 link_100"
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan-0" "lan4" "link_1000"
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan-1" "lan4" "link_2500"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:amber:wan" "eth1" "link_10 link_100"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan-0" "eth1" "link_1000"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan-1" "eth1" "link_2500"
+	;;
+smartrg,sdg-8614)
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:amber:lan" "lan4" "link_10 link_100"
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan-0" "lan4" "link_1000"
+	ucidef_set_led_netdev "lan4" "LAN4" "mdio-bus:05:green:lan-1" "lan4" "link_2500"
+	;;
+smartrg,sdg-8622|\
+smartrg,sdg-8632)
+	ucidef_set_led_netdev "lan" "LAN" "mdio-bus:05:amber:lan" "lan" "link_10 link_100"
+	ucidef_set_led_netdev "lan" "LAN" "mdio-bus:05:green:lan-0" "lan" "link_1000"
+	ucidef_set_led_netdev "lan" "LAN" "mdio-bus:05:green:lan-1" "lan" "link_2500"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:amber:wan" "eth1" "link_10 link_100"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan-0" "eth1" "link_1000"
+	ucidef_set_led_netdev "wan" "WAN" "mdio-bus:06:green:wan-1" "eth1" "link_2500"
+	;;
 smartrg,sdg-8733|\
 smartrg,sdg-8734)
 	ucidef_set_led_netdev "lan-1-green" "LAN1" "mdio-bus:08:green:lan" "lan1" "link_2500 link_5000"