| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950 |
- From 3de4879bf59b46a966ea226a67df70b88f43a23e Mon Sep 17 00:00:00 2001
- From: Eugen Hristev <[email protected]>
- Date: Fri, 9 Apr 2021 14:31:16 +0300
- Subject: [PATCH 196/247] ARM: at91: debug: add sama7g5 low level debug uart
- Add sama7g5 SoC debug uart on Flexcom3. This is the UART that the
- ROM bootloader uses.
- Signed-off-by: Eugen Hristev <[email protected]>
- Signed-off-by: Nicolas Ferre <[email protected]>
- Link: https://lore.kernel.org/r/[email protected]
- [claudiu.beznea: adapt to v5.10.27]
- Signed-off-by: Claudiu Beznea <[email protected]>
- ---
- arch/arm/Kconfig.debug | 10 ++++++++++
- 1 file changed, 10 insertions(+)
- --- a/arch/arm/Kconfig.debug
- +++ b/arch/arm/Kconfig.debug
- @@ -191,6 +191,14 @@ choice
- their output to the USART1 port on SAMV7 based
- machines.
-
- + config DEBUG_AT91_SAMA7G5_FLEXCOM3
- + bool "Kernel low-level debugging on SAMA7G5 FLEXCOM3"
- + select DEBUG_AT91_UART
- + depends on SOC_SAMA7G5
- + help
- + Say Y here if you want kernel low-level debugging support
- + on the FLEXCOM3 port of SAMA7G5.
- +
- config DEBUG_BCM2835
- bool "Kernel low-level debugging on BCM2835 PL011 UART"
- depends on ARCH_BCM2835 && ARCH_MULTI_V6
- @@ -1731,6 +1739,7 @@ config DEBUG_UART_PHYS
- default 0xd4017000 if DEBUG_MMP_UART2
- default 0xd4018000 if DEBUG_MMP_UART3
- default 0xe0000000 if DEBUG_SPEAR13XX
- + default 0xe1824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
- default 0xe4007000 if DEBUG_HIP04_UART
- default 0xe6c40000 if DEBUG_RMOBILE_SCIFA0
- default 0xe6c50000 if DEBUG_RMOBILE_SCIFA1
- @@ -1791,6 +1800,7 @@ config DEBUG_UART_VIRT
- default 0xc8912000 if DEBUG_RV1108_UART0
- default 0xe0010fe0 if ARCH_RPC
- default 0xf0000be0 if ARCH_EBSA110
- + default 0xe0824200 if DEBUG_AT91_SAMA7G5_FLEXCOM3
- default 0xf0010000 if DEBUG_ASM9260_UART
- default 0xf0100000 if DEBUG_DIGICOLOR_UA0
- default 0xf01fb000 if DEBUG_NOMADIK_UART
|
