openwrt/target/linux/ipq40xx/base-files/etc/board.d/02_network

#
# Copyright (c) 2015 The Linux Foundation. All rights reserved.
# Copyright (c) 2011-2015 OpenWrt.org
#

. /lib/functions/uci-defaults.sh
. /lib/functions/system.sh

ipq40xx_setup_interfaces()
{
	local board="$1"

	case "$board" in
	8dev,habanero-dvk|\
	avm,fritzbox-4040|\
	asus,rt-ac42u|\
	asus,rt-ac58u|\
	linksys,ea6350v3|\
	linksys,ea8300|\
	linksys,mr8300|\
	mikrotik,hap-ac2|\
	mikrotik,hap-ac3|\
	mikrotik,hap-ac3-lte6-kit|\
	p2w,r619ac-64m|\
	p2w,r619ac-128m|\
	pakedge,wr-1|\
	teltonika,rutx50|\
	yyets,le1|\
	zyxel,nbg6617)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
		;;
	8dev,jalapeno|\
	alfa-network,ap120c-ac|\
	asus,map-ac2200|\
	cilab,meshpoint-one|\
	edgecore,ecw5211|\
	glinet,gl-ap1300|\
	glinet,gl-b2200|\
	google,wifi|\
	linksys,whw03v2|\
	luma,wrtq-329acn|\
	mikrotik,cap-ac|\
	netgear,wac510|\
	sony,ncp-hg100-cellular|\
	wallys,dr40x9|\
	zte,mf18a|\
	zte,mf289f)
		ucidef_set_interfaces_lan_wan "lan" "wan"
		;;
	aruba,ap-303|\
	aruba,ap-365|\
	avm,fritzrepeater-1200|\
	dlink,dap-2610|\
	extreme-networks,ws-ap3915i|\
	meraki,mr33|\
	meraki,mr74|\
	mikrotik,lhgg-60ad|\
	mikrotik,sxtsq-5-ac|\
	netgear,ex6100v2|\
	netgear,ex6150v2|\
	zte,mf282plus)
		ucidef_set_interface_lan "lan"
		;;
	avm,fritzbox-7530)
		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
		;;
	avm,fritzrepeater-3000|\
	cellc,rtl30vw)
		ucidef_set_interface_lan "lan1 lan2"
		;;
	compex,wpj428)
		ucidef_set_interface_lan "lan1 lan2"
		;;
	devolo,magic-2-wifi-next)
		ucidef_set_interface_lan "lan1 lan2 ghn"
		;;
	extreme-networks,ws-ap391x)
		ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2 sw-eth3 sw-eth5" "sw-eth4"
		;;
	linksys,whw01)
		ucidef_set_interface_lan "eth1 eth2"
		;;
	glinet,gl-a1300|\
	glinet,gl-b1300|\
	mobipromo,cm520-79f)
		ucidef_set_interfaces_lan_wan "lan1 lan2" "wan"
		;;
	mikrotik,wap-ac|\
	mikrotik,wap-ac-lte|\
	mikrotik,wap-r-ac)
		ucidef_set_interface_lan "sw-eth1 sw-eth2"
		;;
	aruba,ap-303h|\
	buffalo,wtr-m2133hp|\
	ezviz,cs-w3-wd1200g-eup|\
	netgear,rbr40|\
	netgear,rbs40|\
	netgear,rbr50|\
	netgear,rbs50|\
	netgear,srr60|\
	netgear,srs60)
		ucidef_set_interfaces_lan_wan "lan1 lan2 lan3" "wan"
		;;
	openmesh,a42|\
	openmesh,a62)
		ucidef_set_interfaces_lan_wan "ethernet2" "ethernet1"
		;;
	plasmacloud,pa1200|\
	plasmacloud,pa2200)
		ucidef_set_interfaces_lan_wan "ethernet1" "ethernet2"
		;;
	qxwlan,e2600ac-c1)
		ucidef_set_interfaces_lan_wan "sw-eth1" "sw-eth2"
		;;
	qxwlan,e2600ac-c2)
		ucidef_set_interfaces_lan_wan "sw-eth1 sw-eth2" "sw-eth3"
		;;
	zte,mf286d)
		ucidef_set_interfaces_lan_wan "lan2 lan3 lan4" "wan"
		;;
	zte,mf287|\
	zte,mf287plus|\
	zte,mf287pro)
		ucidef_set_interface_lan "lan1 lan2 lan3 lan4"
		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
		;;
	netgear,lbr20)
		ucidef_set_interface_lan "lan1 lan2"
		ucidef_set_interface "wan" device "/dev/cdc-wdm0" protocol "qmi"
		;;
	*)
		echo "Unsupported hardware. Network interfaces not initialized"
		;;
	esac
}

ipq40xx_setup_dsl()
{
	local board="$1"
	local annex="j"
	local tone="b"
	local xfer_mode=""

	case "$board" in
	avm,fritzbox-7530)
		;;
	*)
		return 0
		;;
	esac

	ucidef_add_atm_bridge "1" "32" "llc" "bridged" "dsl"
	ucidef_add_vdsl_modem "$annex" "$tone" "$xfer_mode"
	ucidef_set_interface_wan "dsl0" "pppoe"
}

ipq40xx_setup_macs()
{
	local board="$1"
	local lan_mac=""
	local wan_mac=""
	local label_mac=""

	case "$board" in
	8dev,habanero-dvk)
		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
		;;
	asus,rt-ac42u)
		label_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
		;;
	asus,rt-ac58u)
		wan_mac=$(mtd_get_mac_binary_ubi Factory 0x1006)
		lan_mac=$(mtd_get_mac_binary_ubi Factory 0x5006)
		label_mac=$wan_mac
		;;
	avm,fritzbox-7530)
		local tffsdev=$(find_mtd_chardev "nand-tffs")
		wan_mac=$(/usr/bin/fritz_tffs_nand -b -d $tffsdev -n macdsl)
		;;
	cilab,meshpoint-one)
		label_mac=$(mtd_get_mac_binary "ART" 0x1006)
		;;
	devolo,magic-2-wifi-next)
		lan_mac=$(mtd_get_mac_ascii APPSBLENV MacAddress0)
		label_mac=$lan_mac
		;;
	dlink,dap-2610)
		lan_mac=$(mtd_get_mac_ascii bdcfg lanmac)
		label_mac=$lan_mac
		;;
	engenius,eap2200|\
	engenius,emd1)
		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
		label_mac=$lan_mac
		;;
	engenius,emr3500)
		wan_mac=$(mtd_get_mac_ascii 0:APPSBLENV wanaddr)
		lan_mac=$(mtd_get_mac_ascii 0:APPSBLENV ethaddr)
		label_mac=$wan_mac
		;;
	engenius,ens620ext)
		wan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		lan_mac=$(macaddr_add "$wan_mac" 1)
		;;
	ezviz,cs-w3-wd1200g-eup)
		label_mac=$(mtd_get_mac_binary "ART" 0x6)
		;;
	google,wifi)
		wan_mac=$(get_mac_label)
		lan_mac=$(macaddr_add "$wan_mac" 1)
		;;
	linksys,ea6350v3|\
	linksys,ea8300  |\
	linksys,mr8300)
		wan_mac=$(mtd_get_mac_ascii devinfo hw_mac_addr)
		lan_mac=$(macaddr_add "$wan_mac" 1)
		;;
	mikrotik,cap-ac |\
	mikrotik,hap-ac2|\
	mikrotik,hap-ac3|\
	mikrotik,hap-ac3-lte6-kit)
		wan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
		lan_mac=$(macaddr_add $wan_mac 1)
		label_mac="$wan_mac"
		;;
	mikrotik,lhgg-60ad|\
	mikrotik,sxtsq-5-ac)
		lan_mac=$(cat /sys/firmware/mikrotik/hard_config/mac_base)
		label_mac="$lan_mac"
		;;
	netgear,rbr50|\
	netgear,rbs50|\
	netgear,srr60|\
	netgear,srs60|\
	pakedge,wr-1)
		wan_mac=$(macaddr_add $(get_mac_label) 1)
		;;
	esac

	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}

board_config_update
board=$(board_name)
ipq40xx_setup_interfaces $board
ipq40xx_setup_dsl $board
ipq40xx_setup_macs $board
board_config_flush

exit 0