| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162 |
- From 2359dd09f9819c7d57d81e05173541f0f9f820c7 Mon Sep 17 00:00:00 2001
- From: Matteo Croce <[email protected]>
- Date: Tue, 29 Jan 2019 18:47:17 +0100
- Subject: [PATCH] brcmfmac: fix typos
- Fix spelling mistakes in brcmfmac: "lenght" -> "length".
- The typos are also in the special comment blocks which
- translates to documentation.
- Signed-off-by: Matteo Croce <[email protected]>
- Signed-off-by: Kalle Valo <[email protected]>
- ---
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h | 2 +-
- drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +-
- 4 files changed, 4 insertions(+), 4 deletions(-)
- --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
- +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h
- @@ -36,7 +36,7 @@
- #define BRCMF_DCMD_MEDLEN 1536
- #define BRCMF_DCMD_MAXLEN 8192
-
- -/* IOCTL from host to device are limited in lenght. A device can only handle
- +/* IOCTL from host to device are limited in length. A device can only handle
- * ethernet frame size. This limitation is to be applied by protocol layer.
- */
- #define BRCMF_TX_IOCTL_MAX_MSG_SIZE (ETH_FRAME_LEN+ETH_FCS_LEN)
- --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
- +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c
- @@ -47,7 +47,7 @@ enum nvram_parser_state {
- * @state: current parser state.
- * @data: input buffer being parsed.
- * @nvram: output buffer with parse result.
- - * @nvram_len: lenght of parse result.
- + * @nvram_len: length of parse result.
- * @line: current line.
- * @column: current column in line.
- * @pos: byte offset in input buffer.
- --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
- +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.h
- @@ -266,7 +266,7 @@ struct brcmf_event {
- * @status: status information.
- * @reason: reason code.
- * @auth_type: authentication type.
- - * @datalen: lenght of event data buffer.
- + * @datalen: length of event data buffer.
- * @addr: ether address.
- * @ifname: interface name.
- * @ifidx: interface index.
- --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
- +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c
- @@ -508,7 +508,7 @@ static void brcmf_usb_rx_complete(struct
- skb = req->skb;
- req->skb = NULL;
-
- - /* zero lenght packets indicate usb "failure". Do not refill */
- + /* zero length packets indicate usb "failure". Do not refill */
- if (urb->status != 0 || !urb->actual_length) {
- brcmu_pkt_buf_free_skb(skb);
- brcmf_usb_enq(devinfo, &devinfo->rx_freeq, req, NULL);
|
