FIREWRT.dts 2.0 KB

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130
  1. /dts-v1/;
  2. #include "mt7621.dtsi"
  3. #include <dt-bindings/gpio/gpio.h>
  4. #include <dt-bindings/input/input.h>
  5. / {
  6. compatible = "firefly,firewrt", "mediatek,mt7621-soc";
  7. model = "Firefly FireWRT";
  8. aliases {
  9. led-boot = &led_power;
  10. led-failsafe = &led_power;
  11. led-running = &led_power;
  12. led-upgrade = &led_power;
  13. };
  14. memory@0 {
  15. device_type = "memory";
  16. reg = <0x0 0x1c000000>, <0x20000000 0x4000000>;
  17. };
  18. chosen {
  19. bootargs = "console=ttyS0,57600";
  20. };
  21. leds {
  22. compatible = "gpio-leds";
  23. led_power: power {
  24. label = "firewrt:green:power";
  25. gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
  26. };
  27. };
  28. keys {
  29. compatible = "gpio-keys-polled";
  30. poll-interval = <20>;
  31. wps {
  32. label = "wps";
  33. gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  34. linux,code = <KEY_WPS_BUTTON>;
  35. };
  36. power {
  37. label = "power";
  38. gpios = <&gpio0 23 GPIO_ACTIVE_LOW>;
  39. linux,code = <KEY_POWER>;
  40. };
  41. };
  42. };
  43. &sdhci {
  44. status = "okay";
  45. };
  46. &spi0 {
  47. status = "okay";
  48. m25p80@0 {
  49. compatible = "jedec,spi-nor";
  50. reg = <0>;
  51. spi-max-frequency = <10000000>;
  52. partitions {
  53. compatible = "fixed-partitions";
  54. #address-cells = <1>;
  55. #size-cells = <1>;
  56. partition@0 {
  57. label = "u-boot";
  58. reg = <0x0 0x30000>;
  59. read-only;
  60. };
  61. partition@30000 {
  62. label = "u-boot-env";
  63. reg = <0x30000 0x10000>;
  64. read-only;
  65. };
  66. factory: partition@40000 {
  67. label = "factory";
  68. reg = <0x40000 0x10000>;
  69. read-only;
  70. };
  71. partition@50000 {
  72. compatible = "denx,uimage";
  73. label = "firmware";
  74. reg = <0x50000 0xfb0000>;
  75. };
  76. };
  77. };
  78. };
  79. &pcie {
  80. status = "okay";
  81. };
  82. &pcie0 {
  83. mt76@0,0 {
  84. reg = <0x0000 0 0 0 0>;
  85. mediatek,mtd-eeprom = <&factory 0x8000>;
  86. ieee80211-freq-limit = <5000000 6000000>;
  87. };
  88. };
  89. &pcie1 {
  90. mt76@0,0 {
  91. reg = <0x0000 0 0 0 0>;
  92. mediatek,mtd-eeprom = <&factory 0x0000>;
  93. ieee80211-freq-limit = <2400000 2500000>;
  94. };
  95. };
  96. &ethernet {
  97. mtd-mac-address = <&factory 0xe000>;
  98. };
  99. &pinctrl {
  100. state_default: pinctrl0 {
  101. gpio {
  102. ralink,group = "wdt", "rgmii2";
  103. ralink,function = "gpio";
  104. };
  105. };
  106. };