openwrt/target/linux/generic/backport-5.15/737-02-v6.7-net-phy-aquantia-move-MMD_VEND-define-to-header.patch

From e1fbfa4a995d42e02e22b0dff2f8b4fdee1504b3 Mon Sep 17 00:00:00 2001
From: Christian Marangi <[email protected]>
Date: Tue, 14 Nov 2023 15:08:42 +0100
Subject: [PATCH 2/3] net: phy: aquantia: move MMD_VEND define to header

Move MMD_VEND define to header to clean things up and in preparation for
firmware loading support that require some define placed in
aquantia_main.

Signed-off-by: Christian Marangi <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
---
 drivers/net/phy/aquantia/aquantia.h       | 69 +++++++++++++++++++++++
 drivers/net/phy/aquantia/aquantia_hwmon.c | 14 -----
 drivers/net/phy/aquantia/aquantia_main.c  | 55 ------------------
 3 files changed, 69 insertions(+), 69 deletions(-)

--- a/drivers/net/phy/aquantia/aquantia.h
+++ b/drivers/net/phy/aquantia/aquantia.h
@@ -9,6 +9,75 @@
 #include <linux/device.h>
 #include <linux/phy.h>
 
+/* Vendor specific 1, MDIO_MMD_VEND1 */
+#define VEND1_GLOBAL_FW_ID			0x0020
+#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
+#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
+
+/* The following registers all have similar layouts; first the registers... */
+#define VEND1_GLOBAL_CFG_10M			0x0310
+#define VEND1_GLOBAL_CFG_100M			0x031b
+#define VEND1_GLOBAL_CFG_1G			0x031c
+#define VEND1_GLOBAL_CFG_2_5G			0x031d
+#define VEND1_GLOBAL_CFG_5G			0x031e
+#define VEND1_GLOBAL_CFG_10G			0x031f
+/* ...and now the fields */
+#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
+#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
+
+/* Vendor specific 1, MDIO_MMD_VEND2 */
+#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
+#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
+#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
+#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
+#define VEND1_THERMAL_STAT1			0xc820
+#define VEND1_THERMAL_STAT2			0xc821
+#define VEND1_THERMAL_STAT2_VALID		BIT(0)
+#define VEND1_GENERAL_STAT1			0xc830
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
+#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
+#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
+
+#define VEND1_GLOBAL_GEN_STAT2			0xc831
+#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
+
+#define VEND1_GLOBAL_RSVD_STAT1			0xc885
+#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
+#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
+
+#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
+#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
+#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
+
+#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
+#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
+
+#define VEND1_GLOBAL_INT_STD_MASK		0xff00
+#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
+#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
+#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
+#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
+#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
+#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
+#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
+#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
+
+#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
+#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
+#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
+#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
+#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
+#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
+#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
+
 #if IS_REACHABLE(CONFIG_HWMON)
 int aqr_hwmon_probe(struct phy_device *phydev);
 #else
--- a/drivers/net/phy/aquantia/aquantia_hwmon.c
+++ b/drivers/net/phy/aquantia/aquantia_hwmon.c
@@ -13,20 +13,6 @@
 
 #include "aquantia.h"
 
-/* Vendor specific 1, MDIO_MMD_VEND2 */
-#define VEND1_THERMAL_PROV_HIGH_TEMP_FAIL	0xc421
-#define VEND1_THERMAL_PROV_LOW_TEMP_FAIL	0xc422
-#define VEND1_THERMAL_PROV_HIGH_TEMP_WARN	0xc423
-#define VEND1_THERMAL_PROV_LOW_TEMP_WARN	0xc424
-#define VEND1_THERMAL_STAT1			0xc820
-#define VEND1_THERMAL_STAT2			0xc821
-#define VEND1_THERMAL_STAT2_VALID		BIT(0)
-#define VEND1_GENERAL_STAT1			0xc830
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_FAIL	BIT(14)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_FAIL	BIT(13)
-#define VEND1_GENERAL_STAT1_HIGH_TEMP_WARN	BIT(12)
-#define VEND1_GENERAL_STAT1_LOW_TEMP_WARN	BIT(11)
-
 #if IS_REACHABLE(CONFIG_HWMON)
 
 static umode_t aqr_hwmon_is_visible(const void *data,
--- a/drivers/net/phy/aquantia/aquantia_main.c
+++ b/drivers/net/phy/aquantia/aquantia_main.c
@@ -89,61 +89,6 @@
 #define MDIO_C22EXT_STAT_SGMII_TX_FRAME_ALIGN_ERR	0xd31a
 #define MDIO_C22EXT_STAT_SGMII_TX_RUNT_FRAMES		0xd31b
 
-/* Vendor specific 1, MDIO_MMD_VEND1 */
-#define VEND1_GLOBAL_FW_ID			0x0020
-#define VEND1_GLOBAL_FW_ID_MAJOR		GENMASK(15, 8)
-#define VEND1_GLOBAL_FW_ID_MINOR		GENMASK(7, 0)
-
-#define VEND1_GLOBAL_GEN_STAT2			0xc831
-#define VEND1_GLOBAL_GEN_STAT2_OP_IN_PROG	BIT(15)
-
-/* The following registers all have similar layouts; first the registers... */
-#define VEND1_GLOBAL_CFG_10M			0x0310
-#define VEND1_GLOBAL_CFG_100M			0x031b
-#define VEND1_GLOBAL_CFG_1G			0x031c
-#define VEND1_GLOBAL_CFG_2_5G			0x031d
-#define VEND1_GLOBAL_CFG_5G			0x031e
-#define VEND1_GLOBAL_CFG_10G			0x031f
-/* ...and now the fields */
-#define VEND1_GLOBAL_CFG_RATE_ADAPT		GENMASK(8, 7)
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_NONE	0
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_USX		1
-#define VEND1_GLOBAL_CFG_RATE_ADAPT_PAUSE	2
-
-#define VEND1_GLOBAL_RSVD_STAT1			0xc885
-#define VEND1_GLOBAL_RSVD_STAT1_FW_BUILD_ID	GENMASK(7, 4)
-#define VEND1_GLOBAL_RSVD_STAT1_PROV_ID		GENMASK(3, 0)
-
-#define VEND1_GLOBAL_RSVD_STAT9			0xc88d
-#define VEND1_GLOBAL_RSVD_STAT9_MODE		GENMASK(7, 0)
-#define VEND1_GLOBAL_RSVD_STAT9_1000BT2		0x23
-
-#define VEND1_GLOBAL_INT_STD_STATUS		0xfc00
-#define VEND1_GLOBAL_INT_VEND_STATUS		0xfc01
-
-#define VEND1_GLOBAL_INT_STD_MASK		0xff00
-#define VEND1_GLOBAL_INT_STD_MASK_PMA1		BIT(15)
-#define VEND1_GLOBAL_INT_STD_MASK_PMA2		BIT(14)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS1		BIT(13)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS2		BIT(12)
-#define VEND1_GLOBAL_INT_STD_MASK_PCS3		BIT(11)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS1	BIT(10)
-#define VEND1_GLOBAL_INT_STD_MASK_PHY_XS2	BIT(9)
-#define VEND1_GLOBAL_INT_STD_MASK_AN1		BIT(8)
-#define VEND1_GLOBAL_INT_STD_MASK_AN2		BIT(7)
-#define VEND1_GLOBAL_INT_STD_MASK_GBE		BIT(6)
-#define VEND1_GLOBAL_INT_STD_MASK_ALL		BIT(0)
-
-#define VEND1_GLOBAL_INT_VEND_MASK		0xff01
-#define VEND1_GLOBAL_INT_VEND_MASK_PMA		BIT(15)
-#define VEND1_GLOBAL_INT_VEND_MASK_PCS		BIT(14)
-#define VEND1_GLOBAL_INT_VEND_MASK_PHY_XS	BIT(13)
-#define VEND1_GLOBAL_INT_VEND_MASK_AN		BIT(12)
-#define VEND1_GLOBAL_INT_VEND_MASK_GBE		BIT(11)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL1	BIT(2)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL2	BIT(1)
-#define VEND1_GLOBAL_INT_VEND_MASK_GLOBAL3	BIT(0)
-
 /* Sleep and timeout for checking if the Processor-Intensive
  * MDIO operation is finished
  */