| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120 |
- From 153c74fc80b9f33ed1a50d7790bf6979fdceb370 Mon Sep 17 00:00:00 2001
- From: Mantas Pucka <[email protected]>
- Date: Tue, 16 Jan 2024 11:41:06 +0200
- Subject: [PATCH 19/19] arm64: dts: qcom: ipq6018: add wifi node
- IPQ6018 has a AHB based Q6v5 802.11ax radios that are supported
- by the ath11k.
- Add the required DT node to enable the built-in radios.
- Signed-off-by: Mantas Pucka <[email protected]>
- ---
- arch/arm64/boot/dts/qcom/ipq6018.dtsi | 96 +++++++++++++++++++++++++++++++++++
- 1 file changed, 96 insertions(+)
- --- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
- +++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
- @@ -807,6 +807,102 @@
- };
- };
-
- + wifi: wifi@c000000 {
- + compatible = "qcom,ipq6018-wifi";
- + reg = <0x0 0xc000000 0x0 0x1000000>;
- + qcom,rproc = <&q6v5_wcss>;
- + interrupts = <GIC_SPI 320 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 319 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 318 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 317 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 316 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 315 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 314 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 311 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 411 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 410 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 40 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 302 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 301 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 37 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 293 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 292 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 291 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 290 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 289 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 288 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 239 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 236 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 235 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 233 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 231 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 230 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 229 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 228 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 224 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 223 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 203 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 183 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 180 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 179 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 178 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 177 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 176 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 163 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 162 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 160 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 159 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 158 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 157 IRQ_TYPE_EDGE_RISING>,
- + <GIC_SPI 156 IRQ_TYPE_EDGE_RISING>;
- + interrupt-names = "misc-pulse1", "misc-latch", "sw-exception",
- + "watchdog", "ce0", "ce1", "ce2", "ce3", "ce4",
- + "ce5", "ce6", "ce7", "ce8", "ce9", "ce10",
- + "ce11", "host2wbm-desc-feed",
- + "host2reo-re-injection", "host2reo-command",
- + "host2rxdma-monitor-ring3",
- + "host2rxdma-monitor-ring2",
- + "host2rxdma-monitor-ring1",
- + "reo2ost-exception", "wbm2host-rx-release",
- + "reo2host-status",
- + "reo2host-destination-ring4",
- + "reo2host-destination-ring3",
- + "reo2host-destination-ring2",
- + "reo2host-destination-ring1",
- + "rxdma2host-monitor-destination-mac3",
- + "rxdma2host-monitor-destination-mac2",
- + "rxdma2host-monitor-destination-mac1",
- + "ppdu-end-interrupts-mac3",
- + "ppdu-end-interrupts-mac2",
- + "ppdu-end-interrupts-mac1",
- + "rxdma2host-monitor-status-ring-mac3",
- + "rxdma2host-monitor-status-ring-mac2",
- + "rxdma2host-monitor-status-ring-mac1",
- + "host2rxdma-host-buf-ring-mac3",
- + "host2rxdma-host-buf-ring-mac2",
- + "host2rxdma-host-buf-ring-mac1",
- + "rxdma2host-destination-ring-mac3",
- + "rxdma2host-destination-ring-mac2",
- + "rxdma2host-destination-ring-mac1",
- + "host2tcl-input-ring4",
- + "host2tcl-input-ring3",
- + "host2tcl-input-ring2",
- + "host2tcl-input-ring1",
- + "wbm2host-tx-completions-ring3",
- + "wbm2host-tx-completions-ring2",
- + "wbm2host-tx-completions-ring1",
- + "tcl2host-status-ring";
- + status = "disabled";
- + };
- +
- q6v5_wcss: remoteproc@cd00000 {
- compatible = "qcom,ipq6018-wcss-pil";
- reg = <0x0 0x0cd00000 0x0 0x4040>,
|
