openwrt/target/linux/kirkwood/patches-6.1/004-6.4-ARM-dts-kirkwood-Add-missing-phy-mode-and-fixed-link.patch

From 8aea8659a5f3ae8dc63c9f632ce1f676a1483556 Mon Sep 17 00:00:00 2001
From: Andrew Lunn <[email protected]>
Date: Fri, 7 Apr 2023 17:17:20 +0200
Subject: [PATCH] ARM: dts: kirkwood: Add missing phy-mode and fixed links

The DSA framework has got more picky about always having a phy-mode
for the CPU port. The Kirkwood Ethernet is an RGMII port. Set the
switch to impose the RGMII delays.

Additionally, the cpu label has never actually been used in the
binding, so remove it.

Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Gregory CLEMENT <[email protected]>
---
 arch/arm/boot/dts/kirkwood-dir665.dts          | 3 ++-
 arch/arm/boot/dts/kirkwood-l-50.dts            | 2 +-
 arch/arm/boot/dts/kirkwood-linksys-viper.dts   | 3 ++-
 arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts | 3 ++-
 arch/arm/boot/dts/kirkwood-rd88f6281.dtsi      | 2 +-
 5 files changed, 8 insertions(+), 5 deletions(-)

--- a/arch/arm/boot/dts/kirkwood-dir665.dts
+++ b/arch/arm/boot/dts/kirkwood-dir665.dts
@@ -232,7 +232,7 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -251,6 +251,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
--- a/arch/arm/boot/dts/kirkwood-l-50.dts
+++ b/arch/arm/boot/dts/kirkwood-l-50.dts
@@ -254,7 +254,6 @@
 
 			port@6 {
 				reg = <6>;
-				label = "cpu";
 				phy-mode = "rgmii-id";
 				ethernet = <&eth1port>;
 				fixed-link {
@@ -330,6 +329,7 @@
 	ethernet1-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
@@ -198,7 +198,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -221,6 +221,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
--- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
+++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts
@@ -149,7 +149,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;
@@ -166,6 +166,7 @@
 	ethernet0-port@0 {
 		speed = <1000>;
 		duplex = <1>;
+		phy-mode = "rgmii";
 	};
 };
 
--- a/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
+++ b/arch/arm/boot/dts/kirkwood-rd88f6281.dtsi
@@ -105,7 +105,7 @@
 
 			port@5 {
 				reg = <5>;
-				label = "cpu";
+				phy-mode = "rgmii-id";
 				ethernet = <&eth0port>;
 				fixed-link {
 					speed = <1000>;