| 1234567891011121314151617181920212223242526272829303132333435363738394041424344454647484950515253545556575859606162636465666768697071727374757677787980 |
- --- a/arch/arm/boot/dts/kirkwood-iconnect.dts
- +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
- @@ -8,6 +8,13 @@
- model = "Iomega Iconnect";
- compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-
- + aliases {
- + led-boot = &led_power_blue;
- + led-failsafe = &led_power_red;
- + led-running = &led_power_blue;
- + led-upgrade = &led_power_red;
- + };
- +
- memory {
- device_type = "memory";
- reg = <0x00000000 0x10000000>;
- @@ -16,8 +23,6 @@
- chosen {
- bootargs = "console=ttyS0,115200n8 earlyprintk";
- stdout-path = &uart0;
- - linux,initrd-start = <0x4500040>;
- - linux,initrd-end = <0x4800000>;
- };
-
- ocp@f1000000 {
- @@ -89,12 +94,12 @@
- gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- - power-blue {
- + led_power_blue: power-blue {
- label = "power:blue";
- gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
- - default-state = "keep";
- + default-state = "on";
- };
- - power-red {
- + led_power_red: power-red {
- label = "power:red";
- gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
- };
- @@ -146,28 +151,23 @@
- status = "okay";
-
- partition@0 {
- - label = "uboot";
- - reg = <0x0000000 0xc0000>;
- + label = "u-boot";
- + reg = <0x0000000 0xe0000>;
- };
-
- - partition@a0000 {
- - label = "env";
- - reg = <0xa0000 0x20000>;
- + partition@e0000 {
- + label = "u-boot environment";
- + reg = <0xe0000 0x100000>;
- };
-
- partition@100000 {
- - label = "zImage";
- - reg = <0x100000 0x300000>;
- - };
- -
- - partition@540000 {
- - label = "initrd";
- - reg = <0x540000 0x300000>;
- + label = "second stage u-boot";
- + reg = <0x100000 0x200000>;
- };
-
- - partition@980000 {
- - label = "boot";
- - reg = <0x980000 0x1f400000>;
- + partition@200000 {
- + label = "ubi";
- + reg = <0x200000 0x1fe00000>;
- };
- };
-
|
