openwrt/target/linux/bcm4908/patches-5.15/070-v5.17-net-dsa-bcm_sf2-refactor-LED-regs-access.patch

From af30f8eaa8fe4ff1987280f716309711997bd979 Mon Sep 17 00:00:00 2001
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <[email protected]>
Date: Wed, 29 Dec 2021 18:16:42 +0100
Subject: [PATCH] net: dsa: bcm_sf2: refactor LED regs access
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit

1. Define more regs. Some switches (e.g. BCM4908) have up to 6 regs.
2. Add helper for handling non-lineral port <-> reg mappings.
3. Add support for 12 B LED reg blocks on BCM4908 (different layout)

Complete support for LEDs setup will be implemented once Linux receives
a proper design & implementation for "hardware" LEDs.

Signed-off-by: Rafał Miłecki <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
---
 drivers/net/dsa/bcm_sf2.c      | 54 ++++++++++++++++++++++++----
 drivers/net/dsa/bcm_sf2.h      | 10 ++++++
 drivers/net/dsa/bcm_sf2_regs.h | 65 +++++++++++++++++++++++++++++++---
 3 files changed, 119 insertions(+), 10 deletions(-)

--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -62,6 +62,38 @@ static u16 bcm_sf2_reg_rgmii_cntrl(struc
 	return REG_SWITCH_STATUS;
 }
 
+static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
+{
+	switch (port) {
+	case 0:
+		return REG_LED_0_CNTRL;
+	case 1:
+		return REG_LED_1_CNTRL;
+	case 2:
+		return REG_LED_2_CNTRL;
+	}
+
+	switch (priv->type) {
+	case BCM4908_DEVICE_ID:
+		switch (port) {
+		case 3:
+			return REG_LED_3_CNTRL;
+		case 7:
+			return REG_LED_4_CNTRL;
+		default:
+			break;
+		}
+		break;
+	default:
+		break;
+	}
+
+	WARN_ONCE(1, "Unsupported port %d\n", port);
+
+	/* RO fallback reg */
+	return REG_SWITCH_STATUS;
+}
+
 /* Return the number of active ports, not counting the IMP (CPU) port */
 static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
 {
@@ -187,9 +219,14 @@ static void bcm_sf2_gphy_enable_set(stru
 
 	/* Use PHY-driven LED signaling */
 	if (!enable) {
-		reg = reg_readl(priv, REG_LED_CNTRL(0));
-		reg |= SPDLNK_SRC_SEL;
-		reg_writel(priv, reg, REG_LED_CNTRL(0));
+		u16 led_ctrl = bcm_sf2_reg_led_base(priv, 0);
+
+		if (priv->type == BCM7278_DEVICE_ID ||
+		    priv->type == BCM7445_DEVICE_ID) {
+			reg = reg_led_readl(priv, led_ctrl, 0);
+			reg |= LED_CNTRL_SPDLNK_SRC_SEL;
+			reg_led_writel(priv, reg, led_ctrl, 0);
+		}
 	}
 }
 
@@ -1247,9 +1284,14 @@ static const u16 bcm_sf2_4908_reg_offset
 	[REG_SPHY_CNTRL]	= 0x24,
 	[REG_CROSSBAR]		= 0xc8,
 	[REG_RGMII_11_CNTRL]	= 0x014c,
-	[REG_LED_0_CNTRL]	= 0x40,
-	[REG_LED_1_CNTRL]	= 0x4c,
-	[REG_LED_2_CNTRL]	= 0x58,
+	[REG_LED_0_CNTRL]		= 0x40,
+	[REG_LED_1_CNTRL]		= 0x4c,
+	[REG_LED_2_CNTRL]		= 0x58,
+	[REG_LED_3_CNTRL]		= 0x64,
+	[REG_LED_4_CNTRL]		= 0x88,
+	[REG_LED_5_CNTRL]		= 0xa0,
+	[REG_LED_AGGREGATE_CTRL]	= 0xb8,
+
 };
 
 static const struct bcm_sf2_of_data bcm_sf2_4908_data = {
--- a/drivers/net/dsa/bcm_sf2.h
+++ b/drivers/net/dsa/bcm_sf2.h
@@ -210,6 +210,16 @@ SF2_IO_MACRO(acb);
 SWITCH_INTR_L2(0);
 SWITCH_INTR_L2(1);
 
+static inline u32 reg_led_readl(struct bcm_sf2_priv *priv, u16 off, u16 reg)
+{
+	return readl_relaxed(priv->reg + priv->reg_offsets[off] + reg);
+}
+
+static inline void reg_led_writel(struct bcm_sf2_priv *priv, u32 val, u16 off, u16 reg)
+{
+	writel_relaxed(val, priv->reg + priv->reg_offsets[off] + reg);
+}
+
 /* RXNFC */
 int bcm_sf2_get_rxnfc(struct dsa_switch *ds, int port,
 		      struct ethtool_rxnfc *nfc, u32 *rule_locs);
--- a/drivers/net/dsa/bcm_sf2_regs.h
+++ b/drivers/net/dsa/bcm_sf2_regs.h
@@ -25,6 +25,10 @@ enum bcm_sf2_reg_offs {
 	REG_LED_0_CNTRL,
 	REG_LED_1_CNTRL,
 	REG_LED_2_CNTRL,
+	REG_LED_3_CNTRL,
+	REG_LED_4_CNTRL,
+	REG_LED_5_CNTRL,
+	REG_LED_AGGREGATE_CTRL,
 	REG_SWITCH_REG_MAX,
 };
 
@@ -56,6 +60,63 @@ enum bcm_sf2_reg_offs {
 #define CROSSBAR_BCM4908_EXT_GPHY4	1
 #define CROSSBAR_BCM4908_EXT_RGMII	2
 
+/* Relative to REG_LED_*_CNTRL (BCM7278, BCM7445) */
+#define  LED_CNTRL_NO_LINK_ENCODE_SHIFT		0
+#define  LED_CNTRL_M10_ENCODE_SHIFT		2
+#define  LED_CNTRL_M100_ENCODE_SHIFT		4
+#define  LED_CNTRL_M1000_ENCODE_SHIFT		6
+#define  LED_CNTRL_SEL_NO_LINK_ENCODE_SHIFT	8
+#define  LED_CNTRL_SEL_10M_ENCODE_SHIFT		10
+#define  LED_CNTRL_SEL_100M_ENCODE_SHIFT	12
+#define  LED_CNTRL_SEL_1000M_ENCODE_SHIFT	14
+#define  LED_CNTRL_RX_DV_EN			(1 << 16)
+#define  LED_CNTRL_TX_EN_EN			(1 << 17)
+#define  LED_CNTRL_SPDLNK_LED0_ACT_SEL_SHIFT	18
+#define  LED_CNTRL_SPDLNK_LED1_ACT_SEL_SHIFT	20
+#define  LED_CNTRL_ACT_LED_ACT_SEL_SHIFT	22
+#define  LED_CNTRL_SPDLNK_SRC_SEL		(1 << 24)
+#define  LED_CNTRL_SPDLNK_LED0_ACT_POL_SEL	(1 << 25)
+#define  LED_CNTRL_SPDLNK_LED1_ACT_POL_SEL	(1 << 26)
+#define  LED_CNTRL_ACT_LED_POL_SEL		(1 << 27)
+#define  LED_CNTRL_MASK				0x3
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_CTRL				0x0
+#define  LED_CTRL_RX_ACT_EN			0x00000001
+#define  LED_CTRL_TX_ACT_EN			0x00000002
+#define  LED_CTRL_SPDLNK_LED0_ACT_SEL		0x00000004
+#define  LED_CTRL_SPDLNK_LED1_ACT_SEL		0x00000008
+#define  LED_CTRL_SPDLNK_LED2_ACT_SEL		0x00000010
+#define  LED_CTRL_ACT_LED_ACT_SEL		0x00000020
+#define  LED_CTRL_SPDLNK_LED0_ACT_POL_SEL	0x00000040
+#define  LED_CTRL_SPDLNK_LED1_ACT_POL_SEL	0x00000080
+#define  LED_CTRL_SPDLNK_LED2_ACT_POL_SEL	0x00000100
+#define  LED_CTRL_ACT_LED_POL_SEL		0x00000200
+#define  LED_CTRL_LED_SPD_OVRD			0x00001c00
+#define  LED_CTRL_LNK_STATUS_OVRD		0x00002000
+#define  LED_CTRL_SPD_OVRD_EN			0x00004000
+#define  LED_CTRL_LNK_OVRD_EN			0x00008000
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_LINK_SPEED_ENC_SEL		0x4
+#define  LED_LINK_SPEED_ENC_SEL_NO_LINK_SHIFT	0
+#define  LED_LINK_SPEED_ENC_SEL_10M_SHIFT	3
+#define  LED_LINK_SPEED_ENC_SEL_100M_SHIFT	6
+#define  LED_LINK_SPEED_ENC_SEL_1000M_SHIFT	9
+#define  LED_LINK_SPEED_ENC_SEL_2500M_SHIFT	12
+#define  LED_LINK_SPEED_ENC_SEL_10G_SHIFT	15
+#define  LED_LINK_SPEED_ENC_SEL_MASK		0x7
+
+/* Register relative to REG_LED_*_CNTRL (BCM4908) */
+#define REG_LED_LINK_SPEED_ENC			0x8
+#define  LED_LINK_SPEED_ENC_NO_LINK_SHIFT	0
+#define  LED_LINK_SPEED_ENC_M10_SHIFT		3
+#define  LED_LINK_SPEED_ENC_M100_SHIFT		6
+#define  LED_LINK_SPEED_ENC_M1000_SHIFT		9
+#define  LED_LINK_SPEED_ENC_M2500_SHIFT		12
+#define  LED_LINK_SPEED_ENC_M10G_SHIFT		15
+#define  LED_LINK_SPEED_ENC_MASK		0x7
+
 /* Relative to REG_RGMII_CNTRL */
 #define  RGMII_MODE_EN			(1 << 0)
 #define  ID_MODE_DIS			(1 << 1)
@@ -73,10 +134,6 @@ enum bcm_sf2_reg_offs {
 #define  LPI_COUNT_SHIFT		9
 #define  LPI_COUNT_MASK			0x3F
 
-#define REG_LED_CNTRL(x)		(REG_LED_0_CNTRL + (x))
-
-#define  SPDLNK_SRC_SEL			(1 << 24)
-
 /* Register set relative to 'INTRL2_0' and 'INTRL2_1' */
 #define INTRL2_CPU_STATUS		0x00
 #define INTRL2_CPU_SET			0x04