| 123456789101112131415161718192021222324252627282930313233343536 |
- From 58a94eb63233bb2ede13b183b6a6a03aa0a2dfc3 Mon Sep 17 00:00:00 2001
- From: =?UTF-8?q?Ar=C4=B1n=C3=A7=20=C3=9CNAL?= <[email protected]>
- Date: Tue, 6 Feb 2024 01:08:07 +0300
- Subject: [PATCH 35/48] net: dsa: mt7530: correct port capabilities of MT7988
- MIME-Version: 1.0
- Content-Type: text/plain; charset=UTF-8
- Content-Transfer-Encoding: 8bit
- On the switch on the MT7988 SoC, as shown in Block Diagram 8.1.1.3 on page
- 125 of "MT7988A Wi-Fi 7 Generation Router Platform: Datasheet (Open
- Version) v0.1", there are only 4 PHYs. That's port 0 to 3. Set the case for
- ports which connect to switch PHYs to '0 ... 3'.
- Port 4 and 5 are not used at all in this design.
- Link: https://wiki.banana-pi.org/Banana_Pi_BPI-R4#Documents [1]
- Acked-by: Daniel Golle <[email protected]>
- Reviewed-by: Vladimir Oltean <[email protected]>
- Signed-off-by: Arınç ÜNAL <[email protected]>
- Link: https://lore.kernel.org/r/20240206-for-netnext-mt7530-improvements-2-v5-6-d7d92a185cb1@arinc9.com
- Signed-off-by: Jakub Kicinski <[email protected]>
- ---
- drivers/net/dsa/mt7530.c | 2 +-
- 1 file changed, 1 insertion(+), 1 deletion(-)
- --- a/drivers/net/dsa/mt7530.c
- +++ b/drivers/net/dsa/mt7530.c
- @@ -2604,7 +2604,7 @@ static void mt7988_mac_port_get_caps(str
-
- switch (port) {
- /* Ports which are connected to switch PHYs. There is no MII pinout. */
- - case 0 ... 4:
- + case 0 ... 3:
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
- break;
|
