123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122 |
- From 1488fc204568f707fe2a42a913788c00a95af30e Mon Sep 17 00:00:00 2001
- From: Aleksander Jan Bajkowski <[email protected]>
- Date: Fri, 17 Dec 2021 01:07:40 +0100
- Subject: [PATCH] net: lantiq_xrx200: increase buffer reservation
- If the user sets a lower mtu on the CPU port than on the switch,
- then DMA inserts a few more bytes into the buffer than expected.
- In the worst case, it may exceed the size of the buffer. The
- experiments showed that the buffer should be a multiple of the
- burst length value. This patch rounds the length of the rx buffer
- upwards and fixes this bug. The reservation of FCS space in the
- buffer has been removed as PMAC strips the FCS.
- Fixes: 998ac358019e ("net: lantiq: add support for jumbo frames")
- Reported-by: Thomas Nixon <[email protected]>
- Signed-off-by: Aleksander Jan Bajkowski <[email protected]>
- Signed-off-by: Jakub Kicinski <[email protected]>
- ---
- drivers/net/ethernet/lantiq_xrx200.c | 34 ++++++++++++++++++++--------
- 1 file changed, 24 insertions(+), 10 deletions(-)
- --- a/drivers/net/ethernet/lantiq_xrx200.c
- +++ b/drivers/net/ethernet/lantiq_xrx200.c
- @@ -70,6 +70,8 @@ struct xrx200_priv {
- struct xrx200_chan chan_tx;
- struct xrx200_chan chan_rx;
-
- + u16 rx_buf_size;
- +
- struct net_device *net_dev;
- struct device *dev;
-
- @@ -96,6 +98,16 @@ static void xrx200_pmac_mask(struct xrx2
- xrx200_pmac_w32(priv, val, offset);
- }
-
- +static int xrx200_max_frame_len(int mtu)
- +{
- + return VLAN_ETH_HLEN + mtu;
- +}
- +
- +static int xrx200_buffer_size(int mtu)
- +{
- + return round_up(xrx200_max_frame_len(mtu), 4 * XRX200_DMA_BURST_LEN);
- +}
- +
- /* drop all the packets from the DMA ring */
- static void xrx200_flush_dma(struct xrx200_chan *ch)
- {
- @@ -108,8 +120,7 @@ static void xrx200_flush_dma(struct xrx2
- break;
-
- desc->ctl = LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) |
- - (ch->priv->net_dev->mtu + VLAN_ETH_HLEN +
- - ETH_FCS_LEN);
- + ch->priv->rx_buf_size;
- ch->dma.desc++;
- ch->dma.desc %= LTQ_DESC_NUM;
- }
- @@ -157,21 +168,21 @@ static int xrx200_close(struct net_devic
-
- static int xrx200_alloc_skb(struct xrx200_chan *ch)
- {
- - int len = ch->priv->net_dev->mtu + VLAN_ETH_HLEN + ETH_FCS_LEN;
- struct sk_buff *skb = ch->skb[ch->dma.desc];
- + struct xrx200_priv *priv = ch->priv;
- dma_addr_t mapping;
- int ret = 0;
-
- - ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(ch->priv->net_dev,
- - len);
- + ch->skb[ch->dma.desc] = netdev_alloc_skb_ip_align(priv->net_dev,
- + priv->rx_buf_size);
- if (!ch->skb[ch->dma.desc]) {
- ret = -ENOMEM;
- goto skip;
- }
-
- - mapping = dma_map_single(ch->priv->dev, ch->skb[ch->dma.desc]->data,
- - len, DMA_FROM_DEVICE);
- - if (unlikely(dma_mapping_error(ch->priv->dev, mapping))) {
- + mapping = dma_map_single(priv->dev, ch->skb[ch->dma.desc]->data,
- + priv->rx_buf_size, DMA_FROM_DEVICE);
- + if (unlikely(dma_mapping_error(priv->dev, mapping))) {
- dev_kfree_skb_any(ch->skb[ch->dma.desc]);
- ch->skb[ch->dma.desc] = skb;
- ret = -ENOMEM;
- @@ -183,7 +194,7 @@ static int xrx200_alloc_skb(struct xrx20
- wmb();
- skip:
- ch->dma.desc_base[ch->dma.desc].ctl =
- - LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | len;
- + LTQ_DMA_OWN | LTQ_DMA_RX_OFFSET(NET_IP_ALIGN) | priv->rx_buf_size;
-
- return ret;
- }
- @@ -355,6 +366,7 @@ xrx200_change_mtu(struct net_device *net
- int ret = 0;
-
- net_dev->mtu = new_mtu;
- + priv->rx_buf_size = xrx200_buffer_size(new_mtu);
-
- if (new_mtu <= old_mtu)
- return ret;
- @@ -374,6 +386,7 @@ xrx200_change_mtu(struct net_device *net
- ret = xrx200_alloc_skb(ch_rx);
- if (ret) {
- net_dev->mtu = old_mtu;
- + priv->rx_buf_size = xrx200_buffer_size(old_mtu);
- break;
- }
- dev_kfree_skb_any(skb);
- @@ -503,7 +516,8 @@ static int xrx200_probe(struct platform_
- net_dev->netdev_ops = &xrx200_netdev_ops;
- SET_NETDEV_DEV(net_dev, dev);
- net_dev->min_mtu = ETH_ZLEN;
- - net_dev->max_mtu = XRX200_DMA_DATA_LEN - VLAN_ETH_HLEN - ETH_FCS_LEN;
- + net_dev->max_mtu = XRX200_DMA_DATA_LEN - xrx200_max_frame_len(0);
- + priv->rx_buf_size = xrx200_buffer_size(ETH_DATA_LEN);
-
- /* load the memory ranges */
- priv->pmac_reg = devm_platform_get_and_ioremap_resource(pdev, 0, NULL);
|