| 123456789101112131415161718192021222324252627282930313233343536 |
- From 16214121afaadb8ae9aaf73351e874405eb47c15 Mon Sep 17 00:00:00 2001
- From: Samin Guo <[email protected]>
- Date: Tue, 25 Apr 2023 18:51:15 +0800
- Subject: [PATCH 061/122] dt-bindings: net: motorcomm: Add pad driver strength
- cfg
- The motorcomm phy (YT8531) supports the ability to adjust the drive
- strength of the rx_clk/rx_data, the value range of pad driver
- strength is 0 to 7.
- Signed-off-by: Samin Guo <[email protected]>
- ---
- .../devicetree/bindings/net/motorcomm,yt8xxx.yaml | 12 ++++++++++++
- 1 file changed, 12 insertions(+)
- --- a/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
- +++ b/Documentation/devicetree/bindings/net/motorcomm,yt8xxx.yaml
- @@ -62,6 +62,18 @@ properties:
- for a timer.
- type: boolean
-
- + motorcomm,rx-clk-driver-strength:
- + description: drive strength of rx_clk pad.
- + $ref: /schemas/types.yaml#/definitions/uint32
- + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
- + default: 3
- +
- + motorcomm,rx-data-driver-strength:
- + description: drive strength of rx_data/rx_ctl rgmii pad.
- + $ref: /schemas/types.yaml#/definitions/uint32
- + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ]
- + default: 3
- +
- motorcomm,tx-clk-adj-enabled:
- description: |
- This configuration is mainly to adapt to VF2 with JH7110 SoC.
|
