| 123456789101112131415161718192021222324252627282930 |
- # Netgear WNCE2001 has does a checksum check on boot and goes into recovery
- # tftp mode when the check fails. Initializing the JFFS2 partition triggers
- # this, so we make sure to zero checksum and size to be checksummed before
- # that happens, so this needs to run very early during boot.
- do_checksumming_disable() {
- . /lib/functions.sh
- local board=$(board_name)
- case "$board" in
- asus,rt-n56u)
- echo "Board is ASUS RT-N56U, replacing uImage header..."
- local firmware_mtd=$(find_mtd_part firmware)
- local rootfs_mtd=$(find_mtd_part rootfs)
- local rootfs_data_mtd=$(find_mtd_part rootfs_data)
- local rootfs_len=$(grep \"rootfs\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local rootfs_data_len=$(grep \"rootfs_data\" /proc/mtd | awk -F' ' '{print "0x"$2}')
- local offset=$(echo "$rootfs_len $rootfs_data_len 0x40" | awk -F' ' '{printf "%i",$1-$2-$3}')
- local signature=$(dd if=$rootfs_mtd skip=$offset bs=1 count=4 2>/dev/null | hexdump -v -n 4 -e '1/1 "%02x"')
- if [ "$signature" = "27051956" ]; then
- dd conv=notrunc if=$rootfs_mtd skip=$offset of=$firmware_mtd bs=1 count=64 2>/dev/null
- fi
- ;;
- esac
- return 0
- }
- boot_hook_add preinit_main do_checksumming_disable
|
