Halaman utama Jelajahi Bantuan
Daftar Masuk
OpenWrt
/
openwrt
cermin dari https://github.com/openwrt/openwrt.git
2
0
Fork 0
Berkas Masalah 0 Wiki
Pohon: 4edde98768
Ranting Tag
openwrt
/
package
/
boot
/
uboot-mediatek
/
patches
/
401-update-u7623-defconfig.patch

401-update-u7623-defconfig.patch 8.1 KB
Riwayat Mentahan

123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240 
  1. --- a/configs/mt7623a_unielec_u7623_02_defconfig
    2. 

  2. +++ b/configs/mt7623a_unielec_u7623_02_defconfig
    3. 

  3. @@ -7,33 +7,109 @@ CONFIG_SYS_MALLOC_F_LEN=0x4000
    4. 

  4.  CONFIG_NR_DRAM_BANKS=1
    5. 

  5.  CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
    6. 

  6.  CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x81ffff10
    7. 

  7. -CONFIG_ENV_SIZE=0x1000
    8. 

  8. +CONFIG_ENV_SIZE=0x10000
    9. 

  9.  CONFIG_ENV_OFFSET=0x100000
    10. 

  10.  CONFIG_DEFAULT_DEVICE_TREE="mt7623a-unielec-u7623-02-emmc"
    11. 

  11.  CONFIG_TARGET_MT7623=y
    12. 

  12.  CONFIG_SYS_LOAD_ADDR=0x84000000
    13. 

  13.  CONFIG_FIT=y
    14. 

  14.  CONFIG_FIT_VERBOSE=y
    15. 

  15. +CONFIG_FIT_ENABLE_SHA256_SUPPORT=y
    16. 

  16. +CONFIG_LED=y
    17. 

  17. +CONFIG_LED_BLINK=y
    18. 

  18. +CONFIG_LED_GPIO=y
    19. 

  19. +CONFIG_LOGLEVEL=7
    20. 

  20. +CONFIG_LOG=y
    21. 

  21. +CONFIG_AUTOBOOT_KEYED=y
    22. 

  22. +CONFIG_AUTOBOOT_MENU_SHOW=y
    23. 

  23. +CONFIG_BOARD_LATE_INIT=y
    24. 

  24. +# CONFIG_BOOTSTD is not set
    25. 

  25. +# CONFIG_BOOT_DEFAULTS is not set
    26. 

  26.  CONFIG_DISTRO_DEFAULTS=y
    27. 

  27.  CONFIG_BOOTDELAY=3
    28. 

  28. +CONFIG_BOOTP_SEND_HOSTNAME=y
    29. 

  29.  CONFIG_DEFAULT_FDT_FILE="mt7623a-unielec-u7623-02-emmc.dtb"
    30. 

  30.  CONFIG_SYS_CONSOLE_IS_IN_ENV=y
    31. 

  31. +CONFIG_DEFAULT_ENV_FILE="unielec_u7623-02_env"
    32. 

  32. +CONFIG_BUTTON=y
    33. 

  33. +CONFIG_BUTTON_GPIO=y
    34. 

  34. +CONFIG_RESET_BUTTON_LABEL="factory"
    35. 

  35. +CONFIG_CFB_CONSOLE_ANSI=y
    36. 

  36. +CONFIG_CMD_ENV_FLAGS=y
    37. 

  37.  # CONFIG_DISPLAY_BOARDINFO is not set
    38. 

  38. -CONFIG_SYS_PROMPT="U-Boot> "
    39. 

  39. +CONFIG_USE_DEFAULT_ENV_FILE=y
    40. 

  40. +CONFIG_SYS_PROMPT="MT7623> "
    41. 

  41.  CONFIG_SYS_MAXARGS=8
    42. 

  42.  CONFIG_SYS_PBSIZE=1049
    43. 

  43.  CONFIG_SYS_BOOTM_LEN=0x4000000
    44. 

  44.  CONFIG_CMD_BOOTMENU=y
    45. 

  45. +CONFIG_CMD_BOOTP=y
    46. 

  46. +CONFIG_CMD_BOOTZ=y
    47. 

  47. +CONFIG_CMD_BUTTON=y
    48. 

  48. +CONFIG_CMD_CACHE=y
    49. 

  49. +CONFIG_CMD_CDP=y
    50. 

  50. +CONFIG_CMD_DHCP=y
    51. 

  51. +CONFIG_CMD_DM=y
    52. 

  52. +CONFIG_CMD_DNS=y
    53. 

  53. +CONFIG_CMD_ECHO=y
    54. 

  54. +CONFIG_CMD_ENV_READMEM=y
    55. 

  55. +CONFIG_CMD_ERASEENV=y
    56. 

  56. +CONFIG_CMD_EXT4=y
    57. 

  57. +CONFIG_CMD_FAT=y
    58. 

  58. +CONFIG_CMD_FS_GENERIC=y
    59. 

  59. +CONFIG_CMD_FS_UUID=y
    60. 

  60.  # CONFIG_CMD_ELF is not set
    61. 

  61.  # CONFIG_CMD_XIMG is not set
    62. 

  62.  CONFIG_CMD_GPIO=y
    63. 

  63. -CONFIG_CMD_GPT=y
    64. 

  64. +# CONFIG_CMD_GPT is not set
    65. 

  65. +CONFIG_CMD_HASH=y
    66. 

  66. +CONFIG_CMD_ITEST=y
    67. 

  67. +CONFIG_CMD_LED=y
    68. 

  68. +CONFIG_CMD_LICENSE=y
    69. 

  69. +CONFIG_CMD_LINK_LOCAL=y
    70. 

  70. +CONFIG_CMD_MBR=y
    71. 

  71.  CONFIG_CMD_MMC=y
    72. 

  72.  CONFIG_CMD_READ=y
    73. 

  73. -# CONFIG_CMD_SETEXPR is not set
    74. 

  74. +CONFIG_CMD_SF_TEST=y
    75. 

  75. +CONFIG_CMD_PING=y
    76. 

  76. +CONFIG_CMD_PXE=y
    77. 

  77. +CONFIG_CMD_TFTPBOOT=y
    78. 

  78. +CONFIG_CMD_TFTPSRV=y
    79. 

  79. +CONFIG_CMD_ASKENV=y
    80. 

  80. +CONFIG_CMD_PART=y
    81. 

  81. +CONFIG_CMD_RARP=y
    82. 

  82. +CONFIG_CMD_SATA=y
    83. 

  83. +CONFIG_CMD_SETEXPR=y
    84. 

  84. +CONFIG_CMD_SLEEP=y
    85. 

  85. +CONFIG_CMD_SNTP=y
    86. 

  86. +CONFIG_CMD_SOURCE=y
    87. 

  87. +CONFIG_CMD_STRINGS=y
    88. 

  88. +CONFIG_CMD_USB=y
    89. 

  89. +CONFIG_CMD_UUID=y
    90. 

  90. +CONFIG_CMD_READ=y
    91. 

  91. +CONFIG_CMD_SCSI=y
    92. 

  92. +CONFIG_DISPLAY_CPUINFO=y
    93. 

  93. +CONFIG_DM_ETH=y
    94. 

  94. +CONFIG_DM_GPIO=y
    95. 

  95. +CONFIG_DM_SCSI=y
    96. 

  96. +CONFIG_DM_MMC=y
    97. 

  97. +CONFIG_DM_REGULATOR=y
    98. 

  98. +CONFIG_DM_REGULATOR_FIXED=y
    99. 

  99. +CONFIG_DM_SERIAL=y
    100. 

  100. +CONFIG_DM_REGULATOR_GPIO=y
    101. 

  101. +CONFIG_DM_USB=y
    102. 

  102. +CONFIG_DM_PCI=y
    103. 

  103. +CONFIG_AHCI=y
    104. 

  104. +CONFIG_AHCI_PCI=y
    105. 

  105. +CONFIG_SCSI_AHCI=y
    106. 

  106. +CONFIG_SCSI=y
    107. 

  107. +CONFIG_HUSH_PARSER=y
    108. 

  108.  CONFIG_ENV_IS_IN_MMC=y
    109. 

  109.  CONFIG_SYS_RELOC_GD_ENV_ADDR=y
    110. 

  110. +CONFIG_SYS_MMC_ENV_DEV=0
    111. 

  111. +CONFIG_ENV_OVERWRITE=y
    112. 

  112.  CONFIG_NET_RANDOM_ETHADDR=y
    113. 

  113. +CONFIG_NETCONSOLE=y
    114. 

  114.  CONFIG_USE_IPADDR=y
    115. 

  115.  CONFIG_IPADDR="192.168.1.1"
    116. 

  116.  CONFIG_USE_SERVERIP=y
    117. 

  117. @@ -45,6 +121,11 @@ CONFIG_CLK=y
    118. 

  118.  CONFIG_SUPPORT_EMMC_BOOT=y
    119. 

  119.  CONFIG_MMC_HS400_SUPPORT=y
    120. 

  120.  CONFIG_MMC_MTK=y
    121. 

  121. +CONFIG_OF_LIBFDT_OVERLAY=y
    122. 

  122. +CONFIG_PARTITION_UUIDS=y
    123. 

  123. +CONFIG_PCI=y
    124. 

  124. +CONFIG_PCIE_MEDIATEK=y
    125. 

  125. +CONFIG_PHY=y
    126. 

  126.  CONFIG_PHY_FIXED=y
    127. 

  127.  CONFIG_MEDIATEK_ETH=y
    128. 

  128.  CONFIG_PINCTRL=y
    129. 

  129. @@ -54,9 +135,12 @@ CONFIG_POWER_DOMAIN=y
    130. 

  130.  CONFIG_MTK_POWER_DOMAIN=y
    131. 

  131.  CONFIG_DM_SERIAL=y
    132. 

  132.  CONFIG_MTK_SERIAL=y
    133. 

  133. +CONFIG_RANDOM_UUID=y
    134. 

  134. +CONFIG_REGEX=y
    135. 

  135.  CONFIG_SYSRESET=y
    136. 

  136.  CONFIG_SYSRESET_WATCHDOG=y
    137. 

  137.  CONFIG_TIMER=y
    138. 

  138.  CONFIG_MTK_TIMER=y
    139. 

  139. +CONFIG_VERSION_VARIABLE=y
    140. 

  140.  CONFIG_WDT_MTK=y
    141. 

  141.  CONFIG_LZMA=y
    142. 

  142. --- /dev/null
    143. 

  143. +++ b/unielec_u7623-02_env
    144. 

  144. @@ -0,0 +1,47 @@
    145. 

  145. +ipaddr=192.168.1.1
    146. 

  146. +serverip=192.168.1.254
    147. 

  147. +loadaddr=0x88000000
    148. 

  148. +dtaddr=0x83f00000
    149. 

  149. +console=earlycon=uart8250,mmio32,0x11004000 console=ttyS0,115200
    150. 

  150. +initrd_high=0xafffffff
    151. 

  151. +part_default=3
    152. 

  152. +part_recovery=2
    153. 

  153. +bootcmd=run boot_mmc
    154. 

  154. +bootdelay=0
    155. 

  155. +bootfile=openwrt-mediatek-mt7623-unielec_u7623-02-initramfs-recovery.itb
    156. 

  156. +bootfile_upg=openwrt-mediatek-mt7623-unielec_u7623-02-squashfs-sysupgrade.itb
    157. 

  157. +bootled_rec=u7623-01:green:led3
    158. 

  158. +bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60
    159. 

  159. +bootmenu_default=0
    160. 

  160. +bootmenu_delay=0
    161. 

  161. +bootmenu_title=      ( ( ( OpenWrt ) ) )
    162. 

  162. +bootmenu_0=Initialize environment.=run _firstboot
    163. 

  163. +bootmenu_0d=Run default boot command.=run boot_default
    164. 

  164. +bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return
    165. 

  165. +bootmenu_2=Boot production system from eMMC.=run boot_production ; run bootmenu_confirm_return
    166. 

  166. +bootmenu_3=Boot recovery system from eMMC.=run boot_recovery ; run bootmenu_confirm_return
    167. 

  167. +bootmenu_4=Load production system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
    168. 

  168. +bootmenu_5=Load recovery system via TFTP then write to eMMC.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return
    169. 

  169. +bootmenu_6=Reboot.=reset
    170. 

  170. +bootmenu_7=Reset all settings to factory defaults.=run reset_factory ; reset
    171. 

  171. +boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever
    172. 

  172. +boot_first=if button factory ; then led $bootled_rec on ; run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu
    173. 

  173. +boot_production=run emmc_read_production && bootm $loadaddr
    174. 

  174. +boot_recovery=run emmc_read_recovery && bootm $loadaddr
    175. 

  175. +boot_tftp_forever=led bpi-r64:pio:blue on ; while true ; do run boot_tftp_recovery ; sleep 1 ; done
    176. 

  176. +boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run emmc_write_production ; if env exists noboot ; then else bootm $loadaddr ; fi
    177. 

  177. +boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run emmc_write_recovery ; if env exists noboot ; then else bootm $loadaddr ; fi
    178. 

  178. +boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr
    179. 

  179. +boot_mmc=run boot_production ; run boot_recovery
    180. 

  180. +emmc_write_production=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_write_vol
    181. 

  181. +emmc_write_recovery=mmc dev 0 0 ; iminfo $loadaddr && part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_write_vol
    182. 

  182. +emmc_read_production=mmc dev 0 0 ; part start mmc 0 $part_default part_addr && part size mmc 0 $part_default part_size && run mmc_read_vol
    183. 

  183. +emmc_read_recovery=mmc dev 0 0 ; part start mmc 0 $part_recovery part_addr && part size mmc 0 $part_recovery part_size && run mmc_read_vol
    184. 

  184. +mmc_write_vol=imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc erase 0x$part_addr 0x$image_size && mmc write $loadaddr 0x$part_addr 0x$image_size
    185. 

  185. +mmc_read_vol=mmc read $loadaddr $part_addr 0x8 && imszb $loadaddr image_size && test 0x$image_size -le 0x$part_size && mmc read $loadaddr 0x$part_addr 0x$image_size && setexpr filesize $image_size * 0x200
    186. 

  186. +reset_factory=eraseenv && reset
    187. 

  187. +_init_env=setenv _init_env ; saveenv ; saveenv
    188. 

  188. +_firstboot=setenv _firstboot ; run _switch_to_menu _update_bootdev _init_env boot_first
    189. 

  189. +_update_bootdev=setenv _update_bootdev ; setenv bootargs "$console root=/dev/fit0 rootwait"
    190. 

  190. +_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title
    191. 

  191. +_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title                $ver"
    192. 

  192. --- a/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
    193. 

  193. +++ b/arch/arm/dts/mt7623a-unielec-u7623-02-emmc.dts
    194. 

  194. @@ -6,6 +6,7 @@
    195. 

  195.   */
    196. 

  196.  
    197. 

  197.  /dts-v1/;
    198. 

  198. +#include <dt-bindings/input/linux-event-codes.h>
    199. 

  199.  #include "mt7623.dtsi"
    200. 

  200.  #include "mt7623-u-boot.dtsi"
    201. 

  201.  
    202. 

  202. @@ -50,6 +51,18 @@
    203. 

  203.  		regulator-always-on;
    204. 

  204.  	};
    205. 

  205.  
    206. 

  206. +	gpio-keys {
    207. 

  207. +		compatible = "gpio-keys";
    208. 

  208. +		pinctrl-names = "default";
    209. 

  209. +		pinctrl-0 = <&key_pins_a>;
    210. 

  210. +
    211. 

  211. +		factory {
    212. 

  212. +			label = "factory";
    213. 

  213. +			gpios = <&gpio 256 GPIO_ACTIVE_LOW>;
    214. 

  214. +			linux,code = <KEY_RESTART>;
    215. 

  215. +		};
    216. 

  216. +	};
    217. 

  217. +
    218. 

  218.  	leds {
    219. 

  219.  		compatible = "gpio-leds";
    220. 

  220.  
    221. 

  221. @@ -109,6 +122,19 @@
    222. 

  222.  		};
    223. 

  223.  	};
    224. 

  224.  
    225. 

  225. +	key_pins_a: keys-alt {
    226. 

  226. +		mux {
    227. 

  227. +			function = "gpio";
    228. 

  228. +			groups = "msdc3";
    229. 

  229. +		};
    230. 

  230. +
    231. 

  231. +		conf {
    232. 

  232. +			pins = "MSDC0E_DAT0", "MSDC0E_DAT1";
    233. 

  233. +			input-enable;
    234. 

  234. +			bias-pull-up;
    235. 

  235. +		};
    236. 

  236. +	};
    237. 

  237. +
    238. 

  238.  	mmc0_pins_default: mmc0default {
    239. 

  239.  		mux {
    240. 

  240.  			function = "msdc";
    241.