openwrt/package/boot/uboot-mediatek/patches/101-07-i2c-mediatek-fix-I2C-usability-for-MT7981.patch

From 77898faf6ce56eb08109cdb853f074bad5acee55 Mon Sep 17 00:00:00 2001
From: Weijie Gao <[email protected]>
Date: Wed, 19 Jul 2023 17:16:15 +0800
Subject: [PATCH 07/29] i2c: mediatek: fix I2C usability for MT7981

MT7981 actually uses MediaTek I2C controller v3 instead of v1.
This patch adds support for I2C controller v3 fix fixes the I2C usability
for MT7981.

Signed-off-by: Sam Shih <[email protected]>
Signed-off-by: Weijie Gao <[email protected]>
---
 drivers/i2c/mtk_i2c.c | 45 +++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 43 insertions(+), 2 deletions(-)

--- a/drivers/i2c/mtk_i2c.c
+++ b/drivers/i2c/mtk_i2c.c
@@ -183,9 +183,36 @@ static const uint mt_i2c_regs_v2[] = {
 	[REG_DCM_EN] = 0xf88,
 };
 
+static const uint mt_i2c_regs_v3[] = {
+	[REG_PORT] = 0x0,
+	[REG_INTR_MASK] = 0x8,
+	[REG_INTR_STAT] = 0xc,
+	[REG_CONTROL] = 0x10,
+	[REG_TRANSFER_LEN] = 0x14,
+	[REG_TRANSAC_LEN] = 0x18,
+	[REG_DELAY_LEN] = 0x1c,
+	[REG_TIMING] = 0x20,
+	[REG_START] = 0x24,
+	[REG_EXT_CONF] = 0x28,
+	[REG_LTIMING] = 0x2c,
+	[REG_HS] = 0x30,
+	[REG_IO_CONFIG] = 0x34,
+	[REG_FIFO_ADDR_CLR] = 0x38,
+	[REG_TRANSFER_LEN_AUX] = 0x44,
+	[REG_CLOCK_DIV] = 0x48,
+	[REG_SOFTRESET] = 0x50,
+	[REG_SLAVE_ADDR] = 0x94,
+	[REG_DEBUGSTAT] = 0xe4,
+	[REG_DEBUGCTRL] = 0xe8,
+	[REG_FIFO_STAT] = 0xf4,
+	[REG_FIFO_THRESH] = 0xf8,
+	[REG_DCM_EN] = 0xf88,
+};
+
 struct mtk_i2c_soc_data {
 	const uint *regs;
 	uint dma_sync: 1;
+	uint ltiming_adjust: 1;
 };
 
 struct mtk_i2c_priv {
@@ -401,6 +428,10 @@ static int mtk_i2c_set_speed(struct udev
 				(sample_cnt << HS_SAMPLE_OFFSET) |
 				(step_cnt << HS_STEP_OFFSET);
 		i2c_writel(priv, REG_HS, high_speed_reg);
+		if (priv->soc_data->ltiming_adjust) {
+			timing_reg = (sample_cnt << 12) | (step_cnt << 9);
+			i2c_writel(priv, REG_LTIMING, timing_reg);
+		}
 	} else {
 		ret = mtk_i2c_calculate_speed(clk_src, priv->speed,
 					      &step_cnt, &sample_cnt);
@@ -412,7 +443,12 @@ static int mtk_i2c_set_speed(struct udev
 		high_speed_reg = I2C_TIME_CLR_VALUE;
 		i2c_writel(priv, REG_TIMING, timing_reg);
 		i2c_writel(priv, REG_HS, high_speed_reg);
+		if (priv->soc_data->ltiming_adjust) {
+			timing_reg = (sample_cnt << 6) | step_cnt;
+			i2c_writel(priv, REG_LTIMING, timing_reg);
+		}
 	}
+
 exit:
 	if (mtk_i2c_clk_disable(priv))
 		return log_msg_ret("set_speed disable clk", -1);
@@ -725,7 +761,6 @@ static int mtk_i2c_probe(struct udevice
 		return log_msg_ret("probe enable clk", -1);
 
 	mtk_i2c_init_hw(priv);
-
 	if (mtk_i2c_clk_disable(priv))
 		return log_msg_ret("probe disable clk", -1);
 
@@ -750,31 +785,37 @@ static int mtk_i2c_deblock(struct udevic
 static const struct mtk_i2c_soc_data mt76xx_soc_data = {
 	.regs = mt_i2c_regs_v1,
 	.dma_sync = 0,
+	.ltiming_adjust = 0,
 };
 
 static const struct mtk_i2c_soc_data mt7981_soc_data = {
-	.regs = mt_i2c_regs_v1,
+	.regs = mt_i2c_regs_v3,
 	.dma_sync = 1,
+	.ltiming_adjust = 1,
 };
 
 static const struct mtk_i2c_soc_data mt7986_soc_data = {
 	.regs = mt_i2c_regs_v1,
 	.dma_sync = 1,
+	.ltiming_adjust = 0,
 };
 
 static const struct mtk_i2c_soc_data mt8183_soc_data = {
 	.regs = mt_i2c_regs_v2,
 	.dma_sync = 1,
+	.ltiming_adjust = 0,
 };
 
 static const struct mtk_i2c_soc_data mt8518_soc_data = {
 	.regs = mt_i2c_regs_v1,
 	.dma_sync = 0,
+	.ltiming_adjust = 0,
 };
 
 static const struct mtk_i2c_soc_data mt8512_soc_data = {
 	.regs = mt_i2c_regs_v1,
 	.dma_sync = 1,
+	.ltiming_adjust = 0,
 };
 
 static const struct dm_i2c_ops mtk_i2c_ops = {