openwrt/target/linux/ramips/dts/DAP-1350.dts

/dts-v1/;

/include/ "rt3050.dtsi"

/ {
	#address-cells = <1>;
	#size-cells = <1>;
	compatible = "DAP-1350", "ralink,rt3052-soc";
	model = "D-Link DAP-1350";

	memorydetect {
		ralink,memory = <0x0 0x200000 0x4000000>;
	};

	chosen {
		bootargs = "console=ttyS0,115200 mtdparts=1f000000.cfi:192k(u-boot)ro,64k(devdata)ro,192k(devconf)ro,256k(devlang)ro,7488k@0xb0000(firmware)";
	};

	palmbus@10000000 {
		sysc@0 {
			ralink,pinmmux = "i2c", "spi", "uartlite", "jtag", "mdio", "sdram", "rgmii";
			ralink,uartmux = "gpio";
			ralink,wdtmux = <1>;
		};

		gpio0: gpio@600 {
			status = "okay";
		};

	};

	cfi@1f000000 {
		compatible = "cfi-flash";
		reg = <0x1f000000 0x800000>;

		bank-width = <2>;
		device-width = <2>;
		#address-cells = <1>;
		#size-cells = <1>;
	};

	ethernet@10100000 {
		status = "okay";
	};

	esw@10110000 {
		status = "okay";
		ralink,portmap = <0x2f>;
	};

	gpio-leds {
		compatible = "gpio-leds";
		power {
			label = "d-link:blue:power";
			gpios = <&gpio0 8 1>;
		};
		power2 {
			label = "d-link:red:power";
			gpios = <&gpio0 9 1>;
		};
		wps {
			label = "d-link:blue:wps";
			gpios = <&gpio0 14 1>;
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <20>;
		reset {
			label = "reset";
			gpios = <&gpio0 10 1>;
			linux,code = <0x198>;
		};
		wps {
			label = "wps";
			gpios = <&gpio0 0 1>;
			linux,code = <0x211>;
		};
		rt {
			label = "rt";
			gpios = <&gpio0 11 1>;
			linux,code = <0x100>;
		};
		ap {
			label = "ap";
			gpios = <&gpio0 7 1>;
			linux,code = <0x101>;
		};
	};

	wmac@10180000 {
		status = "okay";
	};

	otg@101c0000 {
		status = "okay";
	};
};