| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081 |
- #
- # Copyright 2018-2020 NXP
- #
- # This is free software, licensed under the GNU General Public License v2.
- # See /LICENSE for more information.
- #
- define Device/Default
- PROFILES := Default
- FILESYSTEMS := squashfs
- IMAGES := firmware.bin sysupgrade.bin
- KERNEL := kernel-bin | uImage none
- KERNEL_NAME := zImage
- KERNEL_LOADADDR := 0x80008000
- KERNEL_ENTRY_POINT := 0x80008000
- DEVICE_DTS = $(lastword $(subst _, ,$(1)))
- SUPPORTED_DEVICES = $(subst _,$(comma),$(1))
- IMAGE_SIZE := 64m
- IMAGE/sysupgrade.bin = \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 1M | \
- append-kernel | pad-to 17M | \
- append-rootfs | pad-rootfs | \
- check-size $(LS_SYSUPGRADE_IMAGE_SIZE) | append-metadata
- endef
- define Device/fsl-sdboot
- $(Device/rework-sdcard-images)
- KERNEL = kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb
- IMAGES := sdcard.img.gz sysupgrade.bin
- IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
- endef
- define Device/fsl_ls1021a-twr
- $(Device/fix-sysupgrade)
- DEVICE_VENDOR := NXP
- DEVICE_MODEL := TWR-LS1021A
- DEVICE_VARIANT := Default
- DEVICE_PACKAGES += layerscape-rcw
- IMAGE/firmware.bin := \
- ls-clean | \
- ls-append $(1)-rcw.bin | pad-to 1M | \
- ls-append $(1)-uboot.bin | pad-to 3M | \
- ls-append $(1)-uboot-env.bin | pad-to 15M | \
- ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \
- append-kernel | pad-to 32M | \
- append-rootfs | pad-rootfs | check-size
- endef
- TARGET_DEVICES += fsl_ls1021a-twr
- define Device/fsl_ls1021a-twr-sdboot
- $(Device/fsl-sdboot)
- DEVICE_VENDOR := NXP
- DEVICE_MODEL := TWR-LS1021A
- DEVICE_VARIANT := SD Card Boot
- DEVICE_DTS := ls1021a-twr
- IMAGE/sdcard.img.gz := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 4K | \
- ls-append $(1)-uboot.bin | pad-to 3M | \
- ls-append $(1)-uboot-env.bin | pad-to 16M | \
- ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
- endef
- TARGET_DEVICES += fsl_ls1021a-twr-sdboot
- define Device/fsl_ls1021a-iot-sdboot
- $(Device/fsl-sdboot)
- DEVICE_VENDOR := NXP
- DEVICE_MODEL := LS1021A-IoT
- DEVICE_VARIANT := SD Card Boot
- DEVICE_DTS := ls1021a-iot
- SUPPORTED_DEVICES :=
- IMAGE/sdcard.img.gz := \
- ls-clean | \
- ls-append-sdhead $(1) | pad-to 4K | \
- ls-append $(1)-uboot.bin | pad-to 1M | \
- ls-append $(1)-uboot-env.bin | pad-to 16M | \
- ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \
- append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip
- endef
- TARGET_DEVICES += fsl_ls1021a-iot-sdboot
|
