| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475 |
- From 03e96644d7a810916fc4997d572577e876908b18 Mon Sep 17 00:00:00 2001
- From: =?UTF-8?q?Ren=C3=A9=20Kjellerup?= <[email protected]>
- Date: Mon, 1 Oct 2018 15:07:16 -0700
- Subject: [PATCH] ARM: dts: BCM5301X: Add basic DT for Linksys EA6500 V2
- It is wireless home router based on BCM4708A0 with BCM4360 + BCM4331
- wireless chipsets. The BCM4331 5GHz chip currently isn't supported only
- due to missing compatible firmware.
- Signed-off-by: Rene Kjellerup <[email protected]>
- Signed-off-by: Florian Fainelli <[email protected]>
- ---
- arch/arm/boot/dts/Makefile | 1 +
- arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts | 45 +++++++++++++++++++++++++
- 2 files changed, 46 insertions(+)
- create mode 100644 arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
- bcm4708-asus-rt-ac68u.dtb \
- bcm4708-buffalo-wzr-1750dhp.dtb \
- bcm4708-linksys-ea6300-v1.dtb \
- + bcm4708-linksys-ea6500-v2.dtb \
- bcm4708-luxul-xap-1510.dtb \
- bcm4708-luxul-xwc-1000.dtb \
- bcm4708-netgear-r6250.dtb \
- --- /dev/null
- +++ b/arch/arm/boot/dts/bcm4708-linksys-ea6500-v2.dts
- @@ -0,0 +1,45 @@
- +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
- +/*
- + * Copyright (C) 2017 Rafał Miłecki <[email protected]>
- + * Copyright (C) 2018 Rene Kjellerup <[email protected]>
- + */
- +
- +/dts-v1/;
- +
- +#include "bcm4708.dtsi"
- +#include "bcm5301x-nand-cs0-bch8.dtsi"
- +
- +/ {
- + compatible = "linksys,ea6500-v2", "brcm,bcm4708";
- + model = "Linksys EA6500 V2";
- +
- + chosen {
- + bootargs = "console=ttyS0,115200";
- + };
- +
- + memory {
- + reg = <0x00000000 0x08000000>;
- + };
- +
- + gpio-keys {
- + compatible = "gpio-keys";
- + #address-cells = <1>;
- + #size-cells = <0>;
- +
- + wps {
- + label = "WPS";
- + linux,code = <KEY_WPS_BUTTON>;
- + gpios = <&chipcommon 7 GPIO_ACTIVE_LOW>;
- + };
- +
- + restart {
- + label = "Reset";
- + linux,code = <KEY_RESTART>;
- + gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
- + };
- + };
- +};
- +
- +&usb3_phy {
- + status = "okay";
- +};
|
