| 12345678910111213141516171819202122232425262728293031323334353637383940414243444546474849505152535455565758596061626364656667686970717273747576777879808182 |
- From 5d1bd9669ddcd26384672891c37110046e1ac8e8 Mon Sep 17 00:00:00 2001
- From: Linus Walleij <[email protected]>
- Date: Tue, 9 Oct 2018 10:12:24 +0200
- Subject: [PATCH 03/18] pinctrl: gemini: Drop noisy debug prints
- The dev_info() in the pin control driver is really just good
- for debug, so drop it.
- Signed-off-by: Linus Walleij <[email protected]>
- ---
- drivers/pinctrl/pinctrl-gemini.c | 32 ++++++++++++++++----------------
- 1 file changed, 16 insertions(+), 16 deletions(-)
- --- a/drivers/pinctrl/pinctrl-gemini.c
- +++ b/drivers/pinctrl/pinctrl-gemini.c
- @@ -2207,9 +2207,9 @@ static int gemini_pmx_set_mux(struct pin
- return -ENODEV;
- }
-
- - dev_info(pmx->dev,
- - "ACTIVATE function \"%s\" with group \"%s\"\n",
- - func->name, grp->name);
- + dev_dbg(pmx->dev,
- + "ACTIVATE function \"%s\" with group \"%s\"\n",
- + func->name, grp->name);
-
- regmap_read(pmx->map, GLOBAL_MISC_CTRL, &before);
- regmap_update_bits(pmx->map, GLOBAL_MISC_CTRL,
- @@ -2240,10 +2240,10 @@ static int gemini_pmx_set_mux(struct pin
- "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- before, after, expected);
- } else {
- - dev_info(pmx->dev,
- - "padgroup %s %s\n",
- - gemini_padgroups[i],
- - enabled ? "enabled" : "disabled");
- + dev_dbg(pmx->dev,
- + "padgroup %s %s\n",
- + gemini_padgroups[i],
- + enabled ? "enabled" : "disabled");
- }
- }
-
- @@ -2262,10 +2262,10 @@ static int gemini_pmx_set_mux(struct pin
- "GLOBAL MISC CTRL before: %08x, after %08x, expected %08x\n",
- before, after, expected);
- } else {
- - dev_info(pmx->dev,
- - "padgroup %s %s\n",
- - gemini_padgroups[i],
- - enabled ? "enabled" : "disabled");
- + dev_dbg(pmx->dev,
- + "padgroup %s %s\n",
- + gemini_padgroups[i],
- + enabled ? "enabled" : "disabled");
- }
- }
-
- @@ -2492,9 +2492,9 @@ static int gemini_pinconf_group_set(stru
- regmap_update_bits(pmx->map, GLOBAL_IODRIVE,
- grp->driving_mask,
- val);
- - dev_info(pmx->dev,
- - "set group %s to %d mA drive strength mask %08x val %08x\n",
- - grp->name, arg, grp->driving_mask, val);
- + dev_dbg(pmx->dev,
- + "set group %s to %d mA drive strength mask %08x val %08x\n",
- + grp->name, arg, grp->driving_mask, val);
- break;
- default:
- dev_err(pmx->dev, "invalid config param %04x\n", param);
- @@ -2585,8 +2585,8 @@ static int gemini_pmx_probe(struct platf
- /* Print initial state */
- tmp = val;
- for_each_set_bit(i, &tmp, PADS_MAXBIT) {
- - dev_info(dev, "pad group %s %s\n", gemini_padgroups[i],
- - (val & BIT(i)) ? "enabled" : "disabled");
- + dev_dbg(dev, "pad group %s %s\n", gemini_padgroups[i],
- + (val & BIT(i)) ? "enabled" : "disabled");
- }
-
- /* Check if flash pin is set */
|
