| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748 |
- From 0ccf8511182436183c031e8a2f740ae91a02c625 Mon Sep 17 00:00:00 2001
- From: Ansuel Smith <[email protected]>
- Date: Tue, 14 Sep 2021 14:33:45 +0200
- Subject: net: phy: at803x: add support for qca 8327 internal phy
- Add support for qca8327 internal phy needed for correct init of the
- switch port. It does use the same qca8337 function and reg just with a
- different id.
- Signed-off-by: Ansuel Smith <[email protected]>
- Tested-by: Rosen Penev <[email protected]>
- Tested-by: Andrew Lunn <[email protected]>
- Signed-off-by: David S. Miller <[email protected]>
- ---
- drivers/net/phy/at803x.c | 15 +++++++++++++++
- 1 file changed, 15 insertions(+)
- --- a/drivers/net/phy/at803x.c
- +++ b/drivers/net/phy/at803x.c
- @@ -1410,6 +1410,19 @@ static struct phy_driver at803x_driver[]
- .get_sset_count = at803x_get_sset_count,
- .get_strings = at803x_get_strings,
- .get_stats = at803x_get_stats,
- +}, {
- + /* QCA8327 */
- + .phy_id = QCA8327_PHY_ID,
- + .phy_id_mask = QCA8K_PHY_ID_MASK,
- + .name = "QCA PHY 8327",
- + /* PHY_GBIT_FEATURES */
- + .probe = at803x_probe,
- + .flags = PHY_IS_INTERNAL,
- + .config_init = qca83xx_config_init,
- + .soft_reset = genphy_soft_reset,
- + .get_sset_count = at803x_get_sset_count,
- + .get_strings = at803x_get_strings,
- + .get_stats = at803x_get_stats,
- }, };
-
- module_phy_driver(at803x_driver);
- @@ -1420,6 +1433,8 @@ static struct mdio_device_id __maybe_unu
- { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) },
- { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) },
- { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) },
- + { PHY_ID_MATCH_EXACT(QCA8337_PHY_ID) },
- + { PHY_ID_MATCH_EXACT(QCA8327_PHY_ID) },
- { }
- };
-
|
