123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173174175176177178179180181182183184185186187188189190191192193194195196197198199200201202203204205206207208209210211212213214215216217218219220221222223224225226227228229230231232233234235236237238239240241242243244245246247248249250251252253254255256257258259260261262263264265266267268269270271272273274275276277278279280281282283284285286287288289290291292293294295296297298299300301302303304305306307308309310311312313314315316317318319320321322323324325326327328329330331332333334335336337338339340341342343344345346347348349350351352353354355356357358359360361362363364365366367368369370371372373374375376377378379380381382383384385386387388389390391392393394395396397398399400401402403404405406407408409410411412413414415416417418419420421422423424425426427428429430431432433434435436 |
- From fb00ef462f3f8b70ea8902151cc72810fe90b999 Mon Sep 17 00:00:00 2001
- From: Jonas Gorski <[email protected]>
- Date: Fri, 24 Jun 2016 22:16:01 +0200
- Subject: [PATCH 07/16] pinctrl: add a pincontrol driver for BCM6358
- Add a pincotrol driver for BCM6358. BCM6358 allow overlaying different
- functions onto the GPIO pins. It does not support configuring individual
- pins but only whole groups. These groups may overlap, and still require
- the directions to be set correctly in the GPIO register. In addition the
- functions register controls other, not directly mux related functions.
- Signed-off-by: Jonas Gorski <[email protected]>
- ---
- drivers/pinctrl/bcm63xx/Kconfig | 8 +
- drivers/pinctrl/bcm63xx/Makefile | 1 +
- drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c | 393 ++++++++++++++++++++++++++++++
- 3 files changed, 402 insertions(+)
- create mode 100644 drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
- --- a/drivers/pinctrl/bcm63xx/Kconfig
- +++ b/drivers/pinctrl/bcm63xx/Kconfig
- @@ -15,3 +15,11 @@ config PINCTRL_BCM6348
- select PINCONF
- select PINCTRL_BCM63XX
- select GENERIC_PINCONF
- +
- +config PINCTRL_BCM6358
- + bool "BCM6358 pincontrol driver" if COMPILE_TEST
- + select PINMUX
- + select PINCONF
- + select PINCTRL_BCM63XX
- + select GENERIC_PINCONF
- + select MFD_SYSCON
- --- a/drivers/pinctrl/bcm63xx/Makefile
- +++ b/drivers/pinctrl/bcm63xx/Makefile
- @@ -1,3 +1,4 @@
- obj-$(CONFIG_PINCTRL_BCM63XX) += pinctrl-bcm63xx.o
- obj-$(CONFIG_PINCTRL_BCM6328) += pinctrl-bcm6328.o
- obj-$(CONFIG_PINCTRL_BCM6348) += pinctrl-bcm6348.o
- +obj-$(CONFIG_PINCTRL_BCM6358) += pinctrl-bcm6358.o
- --- /dev/null
- +++ b/drivers/pinctrl/bcm63xx/pinctrl-bcm6358.c
- @@ -0,0 +1,393 @@
- +/*
- + * This file is subject to the terms and conditions of the GNU General Public
- + * License. See the file "COPYING" in the main directory of this archive
- + * for more details.
- + *
- + * Copyright (C) 2016 Jonas Gorski <[email protected]>
- + */
- +
- +#include <linux/kernel.h>
- +#include <linux/bitops.h>
- +#include <linux/gpio.h>
- +#include <linux/gpio/driver.h>
- +#include <linux/mfd/syscon.h>
- +#include <linux/of.h>
- +#include <linux/of_gpio.h>
- +#include <linux/of_address.h>
- +#include <linux/slab.h>
- +#include <linux/regmap.h>
- +#include <linux/platform_device.h>
- +
- +#include <linux/pinctrl/pinconf.h>
- +#include <linux/pinctrl/pinconf-generic.h>
- +#include <linux/pinctrl/pinmux.h>
- +#include <linux/pinctrl/machine.h>
- +
- +#include "../core.h"
- +#include "../pinctrl-utils.h"
- +
- +#include "pinctrl-bcm63xx.h"
- +
- +/* GPIO_MODE register */
- +#define BCM6358_MODE_MUX_NONE 0
- +
- +/* overlays on gpio pins */
- +#define BCM6358_MODE_MUX_EBI_CS BIT(5)
- +#define BCM6358_MODE_MUX_UART1 BIT(6)
- +#define BCM6358_MODE_MUX_SPI_CS BIT(7)
- +#define BCM6358_MODE_MUX_ASYNC_MODEM BIT(8)
- +#define BCM6358_MODE_MUX_LEGACY_LED BIT(9)
- +#define BCM6358_MODE_MUX_SERIAL_LED BIT(10)
- +#define BCM6358_MODE_MUX_LED BIT(11)
- +#define BCM6358_MODE_MUX_UTOPIA BIT(12)
- +#define BCM6358_MODE_MUX_CLKRST BIT(13)
- +#define BCM6358_MODE_MUX_PWM_SYN_CLK BIT(14)
- +#define BCM6358_MODE_MUX_SYS_IRQ BIT(15)
- +
- +#define BCM6358_NGPIO 40
- +
- +struct bcm6358_pingroup {
- + const char *name;
- + const unsigned * const pins;
- + const unsigned num_pins;
- +
- + const u16 mode_val;
- +
- + /* non-GPIO function muxes require the gpio direction to be set */
- + const u16 direction;
- +};
- +
- +struct bcm6358_function {
- + const char *name;
- + const char * const *groups;
- + const unsigned num_groups;
- +};
- +
- +struct bcm6358_pinctrl {
- + struct device *dev;
- + struct pinctrl_dev *pctldev;
- + struct pinctrl_desc desc;
- +
- + struct regmap_field *overlays;
- +
- + struct gpio_chip gpio[2];
- +};
- +
- +#define BCM6358_GPIO_PIN(a, b, bit1, bit2, bit3) \
- + { \
- + .number = a, \
- + .name = b, \
- + .drv_data = (void *)(BCM6358_MODE_MUX_##bit1 | \
- + BCM6358_MODE_MUX_##bit2 | \
- + BCM6358_MODE_MUX_##bit3), \
- + }
- +
- +static const struct pinctrl_pin_desc bcm6358_pins[] = {
- + BCM6358_GPIO_PIN(0, "gpio0", LED, NONE, NONE),
- + BCM6358_GPIO_PIN(1, "gpio1", LED, NONE, NONE),
- + BCM6358_GPIO_PIN(2, "gpio2", LED, NONE, NONE),
- + BCM6358_GPIO_PIN(3, "gpio3", LED, NONE, NONE),
- + PINCTRL_PIN(4, "gpio4"),
- + BCM6358_GPIO_PIN(5, "gpio5", SYS_IRQ, NONE, NONE),
- + BCM6358_GPIO_PIN(6, "gpio6", SERIAL_LED, NONE, NONE),
- + BCM6358_GPIO_PIN(7, "gpio7", SERIAL_LED, NONE, NONE),
- + BCM6358_GPIO_PIN(8, "gpio8", PWM_SYN_CLK, NONE, NONE),
- + BCM6358_GPIO_PIN(9, "gpio09", LEGACY_LED, NONE, NONE),
- + BCM6358_GPIO_PIN(10, "gpio10", LEGACY_LED, NONE, NONE),
- + BCM6358_GPIO_PIN(11, "gpio11", LEGACY_LED, NONE, NONE),
- + BCM6358_GPIO_PIN(12, "gpio12", LEGACY_LED, ASYNC_MODEM, UTOPIA),
- + BCM6358_GPIO_PIN(13, "gpio13", LEGACY_LED, ASYNC_MODEM, UTOPIA),
- + BCM6358_GPIO_PIN(14, "gpio14", LEGACY_LED, ASYNC_MODEM, UTOPIA),
- + BCM6358_GPIO_PIN(15, "gpio15", LEGACY_LED, ASYNC_MODEM, UTOPIA),
- + PINCTRL_PIN(16, "gpio16"),
- + PINCTRL_PIN(17, "gpio17"),
- + PINCTRL_PIN(18, "gpio18"),
- + PINCTRL_PIN(19, "gpio19"),
- + PINCTRL_PIN(20, "gpio20"),
- + PINCTRL_PIN(21, "gpio21"),
- + BCM6358_GPIO_PIN(22, "gpio22", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(23, "gpio23", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(24, "gpio24", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(25, "gpio25", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(26, "gpio26", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(27, "gpio27", UTOPIA, NONE, NONE),
- + BCM6358_GPIO_PIN(28, "gpio28", UTOPIA, UART1, NONE),
- + BCM6358_GPIO_PIN(29, "gpio29", UTOPIA, UART1, NONE),
- + BCM6358_GPIO_PIN(30, "gpio30", UTOPIA, UART1, EBI_CS),
- + BCM6358_GPIO_PIN(31, "gpio31", UTOPIA, UART1, EBI_CS),
- + BCM6358_GPIO_PIN(32, "gpio32", SPI_CS, NONE, NONE),
- + BCM6358_GPIO_PIN(33, "gpio33", SPI_CS, NONE, NONE),
- + PINCTRL_PIN(34, "gpio34"),
- + PINCTRL_PIN(35, "gpio35"),
- + PINCTRL_PIN(36, "gpio36"),
- + PINCTRL_PIN(37, "gpio37"),
- + PINCTRL_PIN(38, "gpio38"),
- + PINCTRL_PIN(39, "gpio39"),
- +};
- +
- +static unsigned ebi_cs_grp_pins[] = { 30, 31 };
- +
- +static unsigned uart1_grp_pins[] = { 28, 29, 30, 31 };
- +
- +static unsigned spi_cs_grp_pins[] = { 32, 33 };
- +
- +static unsigned async_modem_grp_pins[] = { 12, 13, 14, 15 };
- +
- +static unsigned serial_led_grp_pins[] = { 6, 7 };
- +
- +static unsigned legacy_led_grp_pins[] = { 9, 10, 11, 12, 13, 14, 15 };
- +
- +static unsigned led_grp_pins[] = { 0, 1, 2, 3 };
- +
- +static unsigned utopia_grp_pins[] = {
- + 12, 13, 14, 15, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31,
- +};
- +
- +static unsigned pwm_syn_clk_grp_pins[] = { 8 };
- +
- +static unsigned sys_irq_grp_pins[] = { 5 };
- +
- +#define BCM6358_GPIO_MUX_GROUP(n, bit, dir) \
- + { \
- + .name = #n, \
- + .pins = n##_pins, \
- + .num_pins = ARRAY_SIZE(n##_pins), \
- + .mode_val = BCM6358_MODE_MUX_##bit, \
- + .direction = dir, \
- + }
- +
- +static const struct bcm6358_pingroup bcm6358_groups[] = {
- + BCM6358_GPIO_MUX_GROUP(ebi_cs_grp, EBI_CS, 0x3),
- + BCM6358_GPIO_MUX_GROUP(uart1_grp, UART1, 0x2),
- + BCM6358_GPIO_MUX_GROUP(spi_cs_grp, SPI_CS, 0x6),
- + BCM6358_GPIO_MUX_GROUP(async_modem_grp, ASYNC_MODEM, 0x6),
- + BCM6358_GPIO_MUX_GROUP(legacy_led_grp, LEGACY_LED, 0x7f),
- + BCM6358_GPIO_MUX_GROUP(serial_led_grp, SERIAL_LED, 0x3),
- + BCM6358_GPIO_MUX_GROUP(led_grp, LED, 0xf),
- + BCM6358_GPIO_MUX_GROUP(utopia_grp, UTOPIA, 0x000f),
- + BCM6358_GPIO_MUX_GROUP(pwm_syn_clk_grp, PWM_SYN_CLK, 0x1),
- + BCM6358_GPIO_MUX_GROUP(sys_irq_grp, SYS_IRQ, 0x1),
- +};
- +
- +static const char * const ebi_cs_groups[] = {
- + "ebi_cs_grp"
- +};
- +
- +static const char * const uart1_groups[] = {
- + "uart1_grp"
- +};
- +
- +static const char * const spi_cs_2_3_groups[] = {
- + "spi_cs_2_3_grp"
- +};
- +
- +static const char * const async_modem_groups[] = {
- + "async_modem_grp"
- +};
- +
- +static const char * const legacy_led_groups[] = {
- + "legacy_led_grp",
- +};
- +
- +static const char * const serial_led_groups[] = {
- + "serial_led_grp",
- +};
- +
- +static const char * const led_groups[] = {
- + "led_grp",
- +};
- +
- +static const char * const clkrst_groups[] = {
- + "clkrst_grp",
- +};
- +
- +static const char * const pwm_syn_clk_groups[] = {
- + "pwm_syn_clk_grp",
- +};
- +
- +static const char * const sys_irq_groups[] = {
- + "sys_irq_grp",
- +};
- +
- +#define BCM6358_FUN(n) \
- + { \
- + .name = #n, \
- + .groups = n##_groups, \
- + .num_groups = ARRAY_SIZE(n##_groups), \
- + }
- +
- +static const struct bcm6358_function bcm6358_funcs[] = {
- + BCM6358_FUN(ebi_cs),
- + BCM6358_FUN(uart1),
- + BCM6358_FUN(spi_cs_2_3),
- + BCM6358_FUN(async_modem),
- + BCM6358_FUN(legacy_led),
- + BCM6358_FUN(serial_led),
- + BCM6358_FUN(led),
- + BCM6358_FUN(clkrst),
- + BCM6358_FUN(pwm_syn_clk),
- + BCM6358_FUN(sys_irq),
- +};
- +
- +static int bcm6358_pinctrl_get_group_count(struct pinctrl_dev *pctldev)
- +{
- + return ARRAY_SIZE(bcm6358_groups);
- +}
- +
- +static const char *bcm6358_pinctrl_get_group_name(struct pinctrl_dev *pctldev,
- + unsigned group)
- +{
- + return bcm6358_groups[group].name;
- +}
- +
- +static int bcm6358_pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
- + unsigned group, const unsigned **pins,
- + unsigned *num_pins)
- +{
- + *pins = bcm6358_groups[group].pins;
- + *num_pins = bcm6358_groups[group].num_pins;
- +
- + return 0;
- +}
- +
- +static int bcm6358_pinctrl_get_func_count(struct pinctrl_dev *pctldev)
- +{
- + return ARRAY_SIZE(bcm6358_funcs);
- +}
- +
- +static const char *bcm6358_pinctrl_get_func_name(struct pinctrl_dev *pctldev,
- + unsigned selector)
- +{
- + return bcm6358_funcs[selector].name;
- +}
- +
- +static int bcm6358_pinctrl_get_groups(struct pinctrl_dev *pctldev,
- + unsigned selector,
- + const char * const **groups,
- + unsigned * const num_groups)
- +{
- + *groups = bcm6358_funcs[selector].groups;
- + *num_groups = bcm6358_funcs[selector].num_groups;
- +
- + return 0;
- +}
- +
- +static int bcm6358_pinctrl_set_mux(struct pinctrl_dev *pctldev,
- + unsigned selector, unsigned group)
- +{
- + struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
- + const struct bcm6358_pingroup *grp = &bcm6358_groups[group];
- + u32 val = grp->mode_val;
- + u32 mask = val;
- + unsigned pin;
- +
- + for (pin = 0; pin < grp->num_pins; pin++)
- + mask |= (unsigned long)bcm6358_pins[pin].drv_data;
- +
- + regmap_field_update_bits(pctl->overlays, mask, val);
- +
- + for (pin = 0; pin < grp->num_pins; pin++) {
- + int hw_gpio = bcm6358_pins[pin].number;
- + struct gpio_chip *gc = &pctl->gpio[hw_gpio / 32];
- +
- + if (grp->direction & BIT(pin))
- + gc->direction_output(gc, hw_gpio % 32, 0);
- + else
- + gc->direction_input(gc, hw_gpio % 32);
- + }
- +
- + return 0;
- +}
- +
- +static int bcm6358_gpio_request_enable(struct pinctrl_dev *pctldev,
- + struct pinctrl_gpio_range *range,
- + unsigned offset)
- +{
- + struct bcm6358_pinctrl *pctl = pinctrl_dev_get_drvdata(pctldev);
- + u32 mask;
- +
- + mask = (unsigned long)bcm6358_pins[offset].drv_data;
- + if (!mask)
- + return 0;
- +
- + /* disable all functions using this pin */
- + return regmap_field_update_bits(pctl->overlays, mask, 0);
- +}
- +
- +static struct pinctrl_ops bcm6358_pctl_ops = {
- + .get_groups_count = bcm6358_pinctrl_get_group_count,
- + .get_group_name = bcm6358_pinctrl_get_group_name,
- + .get_group_pins = bcm6358_pinctrl_get_group_pins,
- +#ifdef CONFIG_OF
- + .dt_node_to_map = pinconf_generic_dt_node_to_map_pin,
- + .dt_free_map = pinctrl_utils_free_map,
- +#endif
- +};
- +
- +static struct pinmux_ops bcm6358_pmx_ops = {
- + .get_functions_count = bcm6358_pinctrl_get_func_count,
- + .get_function_name = bcm6358_pinctrl_get_func_name,
- + .get_function_groups = bcm6358_pinctrl_get_groups,
- + .set_mux = bcm6358_pinctrl_set_mux,
- + .gpio_request_enable = bcm6358_gpio_request_enable,
- + .strict = true,
- +};
- +
- +static int bcm6358_pinctrl_probe(struct platform_device *pdev)
- +{
- + struct bcm6358_pinctrl *pctl;
- + struct regmap *mode;
- + struct reg_field overlays = REG_FIELD(0, 0, 15);
- +
- + if (pdev->dev.of_node)
- + mode = syscon_regmap_lookup_by_phandle(pdev->dev.of_node,
- + "brcm,gpiomode");
- + else
- + mode = syscon_regmap_lookup_by_pdevname("syscon.fffe0098");
- +
- + if (IS_ERR(mode))
- + return PTR_ERR(mode);
- +
- + pctl = devm_kzalloc(&pdev->dev, sizeof(*pctl), GFP_KERNEL);
- + if (!pctl)
- + return -ENOMEM;
- +
- + pctl->overlays = devm_regmap_field_alloc(&pdev->dev, mode, overlays);
- + if (IS_ERR(pctl->overlays))
- + return PTR_ERR(pctl->overlays);
- +
- + /* disable all muxes by default */
- + regmap_field_write(pctl->overlays, 0);
- +
- + pctl->desc.name = dev_name(&pdev->dev);
- + pctl->desc.owner = THIS_MODULE;
- + pctl->desc.pctlops = &bcm6358_pctl_ops;
- + pctl->desc.pmxops = &bcm6358_pmx_ops;
- +
- + pctl->desc.npins = ARRAY_SIZE(bcm6358_pins);
- + pctl->desc.pins = bcm6358_pins;
- +
- + platform_set_drvdata(pdev, pctl);
- +
- + pctl->pctldev = bcm63xx_pinctrl_register(pdev, &pctl->desc, pctl,
- + pctl->gpio, BCM6358_NGPIO);
- + if (IS_ERR(pctl->pctldev))
- + return PTR_ERR(pctl->pctldev);
- +
- + return 0;
- +}
- +
- +static const struct of_device_id bcm6358_pinctrl_match[] = {
- + { .compatible = "brcm,bcm6358-pinctrl", },
- + { },
- +};
- +
- +static struct platform_driver bcm6358_pinctrl_driver = {
- + .probe = bcm6358_pinctrl_probe,
- + .driver = {
- + .name = "bcm6358-pinctrl",
- + .of_match_table = bcm6358_pinctrl_match,
- + },
- +};
- +
- +builtin_platform_driver(bcm6358_pinctrl_driver);
|