openwrt/target/linux/ath79/generic/base-files/etc/board.d/02_network

#!/bin/sh

. /lib/functions/system.sh
. /lib/functions/uci-defaults.sh
. /lib/functions/k2t.sh

ath79_setup_interfaces()
{
	local board="$1"

	case "$board" in
	adtran,bsap1800-v2|\
	adtran,bsap1840|\
	alfa-network,ap121f|\
	aruba,ap-105|\
	avm,fritz1750e|\
	avm,fritz300e|\
	comfast,cf-wr752ac-v1|\
	comfast,cf-e130n-v2|\
	devolo,dvl1200i|\
	devolo,dvl1750c|\
	devolo,dvl1750i|\
	devolo,dvl1750x|\
	dlink,dir-505|\
	engenius,ecb1750|\
	enterasys,ws-ap3705i|\
	glinet,gl-ar300m-lite|\
	netgear,ex6400|\
	netgear,ex7300|\
	ocedo,koala|\
	ocedo,raccoon|\
	pcs,cap324|\
	pisen,ts-d084|\
	pisen,wmb001n|\
	pisen,wmm003n|\
	siemens,ws-ap3610|\
	tplink,cpe210-v2|\
	tplink,cpe210-v3|\
	tplink,cpe510-v2|\
	tplink,cpe510-v3|\
	tplink,cpe610-v1|\
	tplink,re350k-v1|\
	tplink,re355-v1|\
	tplink,re450-v1|\
	tplink,re450-v2|\
	tplink,re450-v3|\
	tplink,tl-wr902ac-v1|\
	ubnt,bullet-m-ar7240|\
	ubnt,bullet-m-ar7241|\
	ubnt,bullet-m-xw|\
	ubnt,lap-120|\
	ubnt,litebeam-ac-gen2|\
	ubnt,nanobeam-ac|\
	ubnt,nanobridge-m|\
	ubnt,nanostation-ac-loco|\
	ubnt,nanostation-loco-m|\
	ubnt,nanostation-loco-m-xw|\
	ubnt,picostation-m|\
	ubnt,powerbeam-5ac-500|\
	ubnt,powerbeam-5ac-gen2|\
	ubnt,rocket-m|\
	ubnt,unifiac-lite|\
	ubnt,unifiac-lr|\
	ubnt,unifiac-mesh|\
	ubnt,unifi|\
	wd,mynet-wifi-rangeextender|\
	winchannel,wb2000)
		ucidef_set_interface_lan "eth0"
		;;
	avm,fritz4020|\
	pcs,cr3000|\
	tplink,archer-c58-v1|\
	tplink,archer-c59-v1|\
	tplink,archer-c59-v2)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:1" "2:lan:4" "3:lan:3" "4:lan:2"
		;;
	buffalo,bhr-4grv|\
	buffalo,wzr-hp-g450h)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan" "3:lan" "4:lan" "5:lan" "1:wan"
		;;
	buffalo,bhr-4grv2|\
	trendnet,tew-823dru)
		ucidef_add_switch "switch0" \
			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth0"
		;;
	buffalo,wzr-hp-ag300h|\
	tplink,archer-c25-v1|\
	tplink,archer-c60-v1|\
	tplink,archer-c60-v2|\
	tplink,archer-c60-v3|\
	tplink,tl-wdr3500-v1|\
	tplink,tl-wr842n-v1|\
	tplink,tl-wr842n-v3|\
	ubnt,airrouter)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1"
		;;
	buffalo,wzr-hp-g302h-a1a0)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:1" "3:lan:4" "4:lan:3" "5:lan:2" "2:wan"
		;;
	comfast,cf-e110n-v2|\
	comfast,cf-e120a-v3|\
	comfast,cf-e314n-v2|\
	tplink,cpe210-v1|\
	tplink,cpe220-v2|\
	tplink,cpe220-v3|\
	tplink,cpe510-v1|\
	tplink,wbs210-v2|\
	tplink,wbs510-v1|\
	tplink,wbs510-v2|\
	ubnt,nanostation-m|\
	ubnt,routerstation)
		ucidef_set_interfaces_lan_wan "eth1" "eth0"
		;;
	comfast,cf-e560ac)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan"
		;;
	comfast,cf-wr650ac-v1|\
	comfast,cf-wr650ac-v2)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" "6@eth1"
		;;
	devolo,dvl1200e|\
	devolo,dvl1750e|\
	ocedo,ursus)
		ucidef_set_interface_lan "eth0 eth1"
		;;
	devolo,magic-2-wifi)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:wan" "3:lan" "4:lan"
		;;
	dlink,dir-825-b1)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0:lan" "1:lan" "2:lan" "3:lan" "5@eth0"
		;;
	dlink,dir-825-c1|\
	dlink,dir-835-a1|\
	dlink,dir-842-c1|\
	dlink,dir-842-c2|\
	dlink,dir-842-c3|\
	dlink,dir-859-a1|\
	engenius,epg5000|\
	tplink,archer-c2-v3|\
	tplink,tl-wr1043nd-v4|\
	tplink,tl-wr1043n-v5)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan"
		;;
	elecom,wrc-1750ghbk2-i|\
	elecom,wrc-300ghbk2-i|\
	sitecom,wlr-8100)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:4" "3:lan:3" "4:lan:2" "5:lan:1" "1:wan"
		;;
	embeddedwireless,dorin)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:wan" "2:lan:3" "3:lan:2"
		;;
	engenius,ews511ap)
		ucidef_set_interface_lan "eth0 eth1" "dhcp"
		;;
	etactica,eg200)
		ucidef_set_interface_lan "eth0" "dhcp"
		;;
	glinet,gl-ar750)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan"
		;;
	iodata,etg3-r|\
	iodata,wn-ac1167dgr|\
	iodata,wn-ac1600dgr|\
	iodata,wn-ac1600dgr2|\
	iodata,wn-ag300dgr|\
	pcs,cr5000|\
	sitecom,wlr-7100|\
	wd,mynet-n750)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan"
		;;
	librerouter,librerouter-v1)
		ucidef_add_switch "switch0" \
			"0@eth0" "5:wan" "6@eth1" "4:lan"
		;;
	nec,wg1200cr|\
	ubnt,nanostation-ac|\
	yuncore,a782|\
	yuncore,xd4200)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan" "3:wan"
		;;
	nec,wg800hp)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan" "3:lan" "4:lan" "1:wan"
		;;
	netgear,wndr3700|\
	netgear,wndr3700-v2|\
	netgear,wndr3800|\
	netgear,wndr3800ch)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5u@eth0"
		ucidef_add_switch_attr "switch0" "blinkrate" 2
		ucidef_add_switch_port_attr "switch0" 1 led 6
		ucidef_add_switch_port_attr "switch0" 2 led 9
		ucidef_add_switch_port_attr "switch0" 5 led 2
		;;
	netgear,wnr2200-8m|\
	netgear,wnr2200-16m)
		ucidef_set_interface_wan "eth0"
		ucidef_add_switch "switch0" \
			"0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
		;;
	phicomm,k2t)
		ucidef_add_switch "switch0" \
			"0@eth0" "3:lan:1" "5:lan:2" "4:wan"
		;;
	qihoo,c301)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan" "3:lan"
		;;
	rosinson,wr818)
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan" "3:wan"
		;;
	teltonika,rut955|\
	teltonika,rut955-h7v3c0)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1"
		;;
	tplink,archer-a7-v5|\
	tplink,archer-c6-v2|\
	tplink,archer-c6-v2-us|\
	tplink,archer-c7-v4|\
	tplink,archer-c7-v5|\
	tplink,tl-wdr3600-v1|\
	tplink,tl-wdr4300-v1|\
	tplink,tl-wdr4300-v1-il|\
	tplink,tl-wdr4310-v1)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
		;;
	tplink,archer-c5-v1|\
	tplink,archer-c7-v1|\
	tplink,archer-c7-v2|\
	tplink,tl-wdr4900-v2)
		ucidef_add_switch "switch0" \
			"0@eth1" "2:lan" "3:lan" "4:lan" "5:lan" "6@eth0" "1:wan"
		;;
	tplink,archer-d50-v1)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" "1:wan"
		;;
	tplink,archer-d7-v1|\
	tplink,archer-d7b-v1)
		ucidef_add_switch "switch0" \
			"0@eth1" "3:lan:3" "4:lan:2" "5:lan:1" "6@eth0" "2:wan:4" "1:wan:5"
		;;
	tplink,tl-mr6400-v1)
		ucidef_set_interfaces_lan_wan "eth0.1 eth1" "usb0"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:1" "2:lan:3" "3:lan:2"
		;;
	tplink,tl-wr842n-v2)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
		;;
	tplink,tl-wr1043nd-v1)
		ucidef_add_switch "switch0" \
			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
		;;
	tplink,tl-wr1043nd-v2|\
	tplink,tl-wr1043nd-v3|\
	tplink,tl-wr1045nd-v2)
		ucidef_add_switch "switch0" \
			"0@eth1" "1:lan:4" "2:lan:3" "3:lan:2" "4:lan:1" "5:wan" "6@eth0"
		;;
	tplink,tl-wr2543-v1)
		ucidef_add_switch "switch0" \
			"1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "9@eth0"
		;;
	ubnt,acb-isp)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:1" "3:lan:3" "4:lan:2"
		;;
	ubnt,edgeswitch-5xp)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:lan"
		;;
	ubnt,edgeswitch-8xp)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0:lan:1" "1:lan:2" "2:lan:3" "3:lan:4" "4:lan:5" "5:lan:6" "6:lan:7" "7:lan:8"  "8@eth0"
		;;
	ubnt,routerstation-pro)
		ucidef_set_interface_wan "eth0"
		ucidef_add_switch "switch0" \
			"0@eth1" "2:lan:3" "3:lan:2" "4:lan:1"
		;;
	ubnt,nanostation-m-xw)
		ucidef_add_switch "switch0" \
			"0@eth0" "5:lan" "1:wan"
		;;
	ubnt,unifiac-mesh-pro|\
	ubnt,unifiac-pro)
		ucidef_add_switch "switch0" \
			"0@eth0" "2:lan:1" "3:lan:2"
		;;
	zbtlink,zbt-wd323|\
	xiaomi,mi-router-4q)
		ucidef_set_interface_wan "eth1"
		ucidef_add_switch "switch0" \
			"0@eth0" "3:lan:1" "4:lan:2"
		;;
	*)
		ucidef_set_interfaces_lan_wan "eth0" "eth1"
		;;
	esac
}

ath79_setup_macs()
{
	local board="$1"

	case "$board" in
	adtran,bsap1800-v2|\
	adtran,bsap1840)
		lan_mac=$(mtd_get_mac_binary "Board data" 2)
		label_mac=$lan_mac
		;;
	alfa-network,ap121f)
		label_mac=$(mtd_get_mac_binary art 0x1002)
		;;
	avm,fritz1750e|\
	avm,fritz450e)
		label_mac=$(fritz_tffs -n macwlan -i $(find_mtd_part "tffs (1)"))
		;;
	avm,fritz300e)
		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
		label_mac=$(fritz_tffs -n macwlan -i $(find_mtd_part "tffs (1)"))
		;;
	avm,fritz4020)
		lan_mac=$(fritz_tffs -n maca -i $(find_mtd_part "tffs (1)"))
		wan_mac=$(fritz_tffs -n macb -i $(find_mtd_part "tffs (1)"))
		;;
	devolo,magic-2-wifi)
		label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3)
		;;
	dlink,dir-825-b1)
		lan_mac=$(mtd_get_mac_text "caldata" 0xffa0)
		wan_mac=$(mtd_get_mac_text "caldata" 0xffb4)
		;;
	dlink,dir-505)
		lan_mac=$(mtd_get_mac_text "mac" 0x4)
		;;
	dlink,dir-825-c1|\
	dlink,dir-835-a1)
		lan_mac=$(mtd_get_mac_text "mac" 0x4)
		wan_mac=$(mtd_get_mac_text "mac" 0x18)
		;;
	dlink,dir-842-c1|\
	dlink,dir-842-c2|\
	dlink,dir-842-c3|\
	nec,wg1200cr)
		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
		label_mac=$lan_mac
		;;
	dlink,dir-859-a1|\
	qihoo,c301|\
	wd,mynet-n750)
		lan_mac=$(mtd_get_mac_ascii devdata "lanmac")
		wan_mac=$(mtd_get_mac_ascii devdata "wanmac")
		;;
	elecom,wrc-1750ghbk2-i|\
	elecom,wrc-300ghbk2-i)
		wan_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" -2)
		;;
	engenius,ecb1750)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		label_mac=$(mtd_get_mac_ascii u-boot-env athaddr)
		;;
	engenius,epg5000)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		;;
	engenius,ews511ap)
		lan_mac=$(mtd_get_mac_text "u-boot-env" 0xe9)
		eth1_mac=$(macaddr_add "$lan_mac" 1)
		ucidef_set_interface "eth0" ifname "eth0" protocol "none" macaddr "$lan_mac"
		ucidef_set_interface "eth1" ifname "eth1" protocol "none" macaddr "$eth1_mac"
		;;
	enterasys,ws-ap3705i)
		label_mac=$(mtd_get_mac_ascii u-boot-env0 ethaddr)
		;;
	iodata,etg3-r)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(macaddr_add "$lan_mac" -1)
		label_mac=$wan_mac
		;;
	iodata,wn-ac1167dgr|\
	iodata,wn-ac1600dgr|\
	iodata,wn-ac1600dgr2|\
	iodata,wn-ag300dgr)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		label_mac=$wan_mac
		;;
	jjplus,ja76pf2)
		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n alias/ethaddr)
		lan_mac=$(macaddr_add "$wan_mac" 1)
		;;
	nec,wg800hp)
		lan_mac=$(mtd_get_mac_text board_data 0x280)
		wan_mac=$(mtd_get_mac_text board_data 0x480)
		label_mac=$wan_mac
		;;
	netgear,wndr3700|\
	netgear,wndr3700-v2|\
	netgear,wndr3800)
		lan_mac=$(macaddr_setbit_la "$(mtd_get_mac_binary art 0x0)")
		;;
	phicomm,k2t)
		lan_mac=$(k2t_get_mac "lan_mac")
		wan_mac=$(k2t_get_mac "wan_mac")
		;;
	rosinson,wr818)
		wan_mac=$(mtd_get_mac_binary factory 0x0)
		lan_mac=$(macaddr_setbit_la "$wan_mac")
		;;
	sitecom,wlr-7100|\
	sitecom,wlr-8100)
		lan_mac=$(mtd_get_mac_ascii u-boot-env ethaddr)
		wan_mac=$(mtd_get_mac_ascii u-boot-env wanaddr)
		label_mac=$lan_mac
		;;
	tplink,archer-a7-v5|\
	tplink,archer-c7-v4|\
	tplink,archer-c7-v5|\
	tplink,tl-wr1043nd-v4|\
	tplink,tl-wr1043n-v5)
		base_mac=$(mtd_get_mac_binary info 0x8)
		wan_mac=$(macaddr_add "$base_mac" 1)
		;;
	tplink,tl-wdr3600-v1|\
	tplink,tl-wdr4300-v1|\
	tplink,tl-wdr4300-v1-il)
		base_mac=$(mtd_get_mac_binary u-boot 0x1fc00)
		wan_mac=$(macaddr_add "$base_mac" 1)
		;;
	trendnet,tew-823dru)
		lan_mac=$(mtd_get_mac_text mac 0x4)
		wan_mac=$(mtd_get_mac_text mac 0x18)
		label_mac=$wan_mac
		;;
	ubnt,airrouter|\
	ubnt,bullet-m-ar7240|\
	ubnt,bullet-m-ar7241|\
	ubnt,nanobridge-m|\
	ubnt,nanostation-loco-m|\
	ubnt,nanostation-m|\
	ubnt,picostation-m|\
	ubnt,rocket-m|\
	ubnt,unifi)
		label_mac=$(cat /sys/class/ieee80211/phy0/macaddress)
		;;
	ubnt,litebeam-ac-gen2|\
	ubnt,powerbeam-5ac-500|\
	ubnt,powerbeam-5ac-gen2)
		label_mac=$(mtd_get_mac_binary art 0x5006)
		;;
	ubnt,routerstation|\
	ubnt,routerstation-pro)
		wan_mac=$(fconfig -s -r -d $(find_mtd_part "RedBoot config") -n ar7100_esa)
		lan_mac=$(macaddr_add "$wan_mac" 1)
		;;
	wd,mynet-wifi-rangeextender)
		lan_mac=$(nvram get et0macaddr)
		;;
	esac

	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" $lan_mac
	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr "wan" $wan_mac
	[ -n "$label_mac" ] && ucidef_set_label_macaddr $label_mac
}

board_config_update
board=$(board_name)
ath79_setup_interfaces $board
ath79_setup_macs $board
board_config_flush

exit 0