| 123456789101112131415161718192021222324252627282930313233343536373839404142434445464748495051525354555657585960616263646566676869707172737475767778798081828384858687888990919293949596979899100101102103104105106107108109110111112113114115116117118119120121122123124125126127128129130131132133134135136137138139140141142143144145146147148149150151152153154155156157158159160161162163164165166167168169170171172173 |
- --- /dev/null
- +++ b/arch/arm/boot/dts/kirkwood-on100.dts
- @@ -0,0 +1,160 @@
- +/dts-v1/;
- +
- +#include "kirkwood.dtsi"
- +#include "kirkwood-6282.dtsi"
- +
- +/ {
- + model = "Cisco Systems ON100";
- + compatible = "cisco,on100", "marvell,kirkwood-88f6282", "marvell,kirkwood";
- +
- + memory {
- + device_type = "memory";
- + reg = <0x00000000 0x20000000>;
- + };
- +
- + aliases {
- + serial0 = &uart0;
- + };
- +
- + chosen {
- + bootargs = "console=ttyS0,115200n8 earlyprintk";
- + stdout-path = "serial0:115200n8";
- + };
- +
- + gpio_keys {
- + compatible = "gpio-keys";
- + #address-cells = <1>;
- + #size-cells = <0>;
- + pinctrl-0 = <&pmx_btn_reset>;
- + pinctrl-names = "default";
- +
- + button@1 {
- + label = "Reset Button";
- + linux,code = <KEY_RESTART>;
- + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- + };
- + };
- +
- + gpio-leds {
- + compatible = "gpio-leds";
- + pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
- + pinctrl-names = "default";
- +
- + health-g {
- + label = "on100:green:health";
- + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- + };
- +
- + health-r {
- + label = "on100:red:health";
- + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
- + };
- +
- + health2-g {
- + label = "on100:green:health2";
- + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
- + };
- +
- + health2-r {
- + label = "on100:red:health2";
- + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
- + };
- + };
- +};
- +
- +ð0 {
- + status = "okay";
- +
- + ethernet0-port@0 {
- + phy-handle = <ðphy0>;
- + phy-connection-type = "rgmii-id";
- + };
- +};
- +
- +ð1 {
- + status = "okay";
- +
- + ethernet1-port@0 {
- + phy-handle = <ðphy1>;
- + phy-connection-type = "rgmii-id";
- + };
- +};
- +
- +&mdio {
- + status = "okay";
- +
- + ethphy0: ethernet-phy@0 {
- + /* Marvell 88E1121R */
- + compatible = "ethernet-phy-id0141.0cb0",
- + "ethernet-phy-ieee802.3-c22";
- + reg = <0>;
- + };
- +
- + ethphy1: ethernet-phy@1 {
- + /* Marvell 88E1121R */
- + compatible = "ethernet-phy-id0141.0cb0",
- + "ethernet-phy-ieee802.3-c22";
- + reg = <1>;
- + };
- +};
- +
- +&nand {
- + status = "okay";
- +
- + partition@0 {
- + label = "u-boot";
- + reg = <0x00000000 0x000a0000>;
- + read-only;
- + };
- +
- + partition@a0000 {
- + label = "u-boot environment";
- + reg = <0x000a0000 0x00020000>;
- + read-only;
- + };
- +
- + partition@c0000 {
- + label = "kernel";
- + reg = <0x000c0000 0x00540000>;
- + };
- +
- + partition@600000 {
- + label = "ubi";
- + reg = <0x00600000 0x1fa00000>;
- + };
- +};
- +
- +&pinctrl {
- + pmx_led_health_r: pmx-led-health-r {
- + marvell,pins = "mpp45";
- + marvell,function = "gpio";
- + };
- +
- + pmx_led_health_g: pmx-led-health-g {
- + marvell,pins = "mpp44";
- + marvell,function = "gpio";
- + };
- +
- + pmx_led_health2_r: pmx-led-health2-r {
- + marvell,pins = "mpp47";
- + marvell,function = "gpio";
- + };
- +
- + pmx_led_health2_g: pmx-led-health2-g {
- + marvell,pins = "mpp46";
- + marvell,function = "gpio";
- + };
- +
- + pmx_btn_reset: pmx-led-reset {
- + marvell,pins = "mpp31";
- + marvell,function = "gpio";
- + };
- +};
- +
- +&sdio {
- + status = "okay";
- +};
- +
- +&uart0 {
- + status = "okay";
- +};
- --- a/arch/arm/boot/dts/Makefile
- +++ b/arch/arm/boot/dts/Makefile
- @@ -206,6 +206,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
- kirkwood-nsa310b.dtb \
- kirkwood-nsa310s.dtb \
- kirkwood-nsa325.dtb \
- + kirkwood-on100.dtb \
- kirkwood-openblocks_a6.dtb \
- kirkwood-openblocks_a7.dtb \
- kirkwood-openrd-base.dtb \
|
